Lectric xp ebike error code 007

Lectric xp ebike nuts were loose on rear electric hub causing wires to Twist, cut the wires and break . Only had the bike 6 months and all parts were assembled at the factory. Should have double checked to make sure everything was tight. Bike is pretty good but not sure about quality control When it leaves factory. Don't think this would be covered under warranty So I will try fix myself

[@June4600]

Thanks for posting this video. I’m on the lectric xp Facebook group and people talk about that error code, nobody ever talked about this fix you just did. Good stuff man enjoy your bike 👍🏼

[@loadedtoaster4954]

Thanks for this. I got this error code so I followed the hubs wire to connecting point and pushed it together and luckily my problem was solved. Just a slight disconnect.

[@sandrapelkie4520]

THANK YOU. 😀

[@crispycream1878]

Same thing happened to me I just reset the bike pushed it and Gabe it throttle and it started working again. If you don't want that to happen don't use your throttle unless your going forward don't toy with it and roll the bike back at the same time that's how mine messed up I was testing its power and going against it

[@nathandrake4895]

I just got that error today had to pedal back home 😓

[@riviecc]

Most likely loose connector

[@amanoueilyounnan578]

i have error 007 i have no idea how to fix it it ain’t riding at all it just stoped when i came back home i went for a 26 minute ride at first it said error 010 i plug it in and out then it said error 007 which i don’t know what to do any help ? please i’m confused.

[@riviecc]

007 code defitly problem with wire making coonection to hub .Could be break in wire at hub . Those wires are really thin . It usually gets cut where it enters the hub . It's hard to see . Take a picture with your phone and zoom in on it . If you know someone with same bike , try connecting the wire from your bike to their hub to rule out any other problems . Lectric sells new hub with tire for 250.00 if you can't repair hub

[@amanoueilyounnan578]

@@riviecc Thx tried connecting my hub to another bike one definitely didn’t work at all it must be a wire then thx

[@justindorcik7948]

I get the code on and off. Pain in the butt.