sir ur video is really informative. sir i have some doubts. how to display all IP addressed from the pool? how to dhcp server selects IP address randomly from the pool to assign to any device? how to set the lease time of an address in dhcp server? kindly answer these questions. these answers will be helpful to my research paper. thank you
Hi, Ok Thanks please find the answer below. How to Display All IP Addresses from the Pool? Command: show ip pool This command will display detailed information about the specified IP pool, including all IP addresses within that pool, their status (free, used, expired), and lease time. How DHCP Server Selects IP Address Randomly from the Pool to Assign to Any Device? By default, DHCP servers select IP addresses from the pool in a sequential manner. To achieve random selection, you can implement a script or application that shuffles the IP addresses in the pool before assigning them. However, Cisco routers do not provide a built-in mechanism for random IP address selection. How to Set the Lease Time of an Address in DHCP Server? Command: ip pool While in the IP pool configuration mode, use the lease command to specify the default lease time for addresses in the pool. Example: ip pool POOL1 network 192.168.1.0 255.255.255.0 dns-server 8.8.8.8 default-router 192.168.1.1 lease 120 // Sets lease time to 120 minutes exit
First, thanks for the video. Second, I would like to know what option do you use for appears the port (for example "fa0/1") as a note from a device automatically without use a note that is connect with another port in another device. I only use note for do it and its repetitive and anoying. And again thank you for the video, it helps a lot in my cisco progress 🙂
So , I do not understood something, in this example ı do not see any DHCP server . I just see router , does it composed with router can you explain it please
Thank you random internet teacher!!!!
👍
You saved me and my buddies
Final project too
👍
If u r watching this ur assignment submission is tomorrow
Hi,
How we can help you?
A week before my exam ☠️
In this senario how to configure dns as router
And create also host
Thanks for the video, super handy when using a AP
Thanks
All your videos are classic. Thank you, bro.
👍
love the effort, got the idea of how it works so classes will be easier, thanks
Glad it was helpful!
Thanks sir good explanation from Afghanistan ❤
👍
you mean taliban?
much thanks direct and accurate
👍
Thanks a lot sir
Most welcome
sir ur video is really informative. sir i have some doubts.
how to display all IP addressed from the pool?
how to dhcp server selects IP address randomly from the pool to assign to any device?
how to set the lease time of an address in dhcp server?
kindly answer these questions. these answers will be helpful to my research paper.
thank you
Hi,
Ok Thanks please find the answer below.
How to Display All IP Addresses from the Pool?
Command: show ip pool
This command will display detailed information about the specified IP pool, including all IP addresses within that pool, their status (free, used, expired), and lease time.
How DHCP Server Selects IP Address Randomly from the Pool to Assign to Any Device?
By default, DHCP servers select IP addresses from the pool in a sequential manner. To achieve random selection, you can implement a script or application that shuffles the IP addresses in the pool before assigning them. However, Cisco routers do not provide a built-in mechanism for random IP address selection.
How to Set the Lease Time of an Address in DHCP Server?
Command: ip pool
While in the IP pool configuration mode, use the lease command to specify the default lease time for addresses in the pool.
Example:
ip pool POOL1
network 192.168.1.0 255.255.255.0
dns-server 8.8.8.8
default-router 192.168.1.1
lease 120 // Sets lease time to 120 minutes
exit
First, thanks for the video. Second, I would like to know what option do you use for appears the port (for example "fa0/1") as a note from a device automatically without use a note that is connect with another port in another device. I only use note for do it and its repetitive and anoying. And again thank you for the video, it helps a lot in my cisco progress 🙂
Hi,
You mean how we connect automatically. You need to press control and then select cable and then connect devices..
Thanks
@@networkforyou11 thanks
Can you do videos on basic configuration of Aruba switch
Hi,
Ok sure.
Thanks
So , I do not understood something, in this example ı do not see any DHCP server . I just see router , does it composed with router can you explain it please
i believe the router is acting as the server
Hi,
Yes we configure dhcp server in side router.
Thanks
Yes
@@networkforyou11 thank you very much
@@McLovinRamirez thank you too, my friend
how are you connecting without selecting the wire again and again?
Hi,
If you select cable by press ctrl then no need to take cable again.
Thanks
Sir when i type : ip dhcp ex its not working..it says incomplete command?
Hi,
You need to define your ip address also along with that command.
Or what app us we will check..
Thanks
Hi
Hi,
Ok sure.
tem como fazer eles se pingarem?
English please
Can you upload this file sir
Hi,
Ok sure.
Join our telegram channel we share some sample notes and files.
Thanks
Merci beaucoup c'est top ! ❤
👍