Can be found on Amazon (US) www.amazon.com/dp/B071WJYXBX (U.K) www.amazon.co.uk/dp/B0791CX8M2 (France) www.amazon.fr/dp/B09CFZPSLJ (Germany): amzn.to/2T5DecG
This Is the coolest thing I have ever seen. Perfect for hanging out with that special someone or just alone listening to some chill music. Either way I was relaxed just watching it
First, great video, thanks for uploading. Looking to purchase a kit however there are so many out there at the moment. 10w, 20w, 32w etc I assume its all to do with power/brightness. As you have installed the 32w kit, do you use the full brightness or have then dimmed down? Have you installed different size fibres to make the sky light look more realistic? Many thanks.
@@lettuce9612 well it works great but fiber optics has a lifespan though. The more heat there is the more cracks the fiber optics get and then the amount of light passing through the fiber optics reduces overtime . Probably should have installed some kind of heat protection sticker on the roof of the car before installing
Two questions: 1) Did you glue each fiber optic from the back of the headliner so that the final fibers got get pulled back into the roof liner? 2) How long did it take from start to finish for this 1000 fiber strand project? Thanks
Ja das Licht ist dimmbar (bis es fast aus ist - schätze ca. 10 Stufen) Durch das selbe Loch habe ich nie mehrere gesteckt. Ich habe einfach mehre Löcher in einem kleineren Bereich gebohrt. Dass die Lichter unterschiedlich hell sind, ist dank dem "Twinkle" Effekt. Dadurch werden manche Glasfasern verschieden hell beleuchtet.
This will most like be different in every car. This is why i did not show. Also installing Power is just plugging into Car Power Outlet (car lighter socket). Since i wanted a cleaner and more permament solution, i just cut the wire and connected to my car lighter socket from the back. Just solder to + and - cable.
It's not a movie to tell some story... Do u need subtitles too..for this vdo.. ok the I'll tell connect projector to power cable, then place fibres in drilled holes., Then connect fiber cables with projector light.. then cut the remain fiber cable...
@@0togtr811 I don't know whether u r telling real or not. I think u r criticising that person .. bcoz he never talked... So that I harshly commented to support that person.
@@factchristo6550 you have a major malfunction. All the comment was trying to was nice, which is exactly the opposite of what you were going for. Absolutely arrogant and inconsiderate.
Yes you can keep off during driving, but you can also turn down the light, so you barley notice it. Normal use it is not more intrusive than ambient light of Audi BMW or Mercedes.
Das kannst du leicht checken: Ich habe 2x Zigarettenanzünder im Kofferraum, diese sind zusammen mit einer 20 Ampere Sicherung abgesichert. (Da Hilft die Bedienungsanleitung deines Autos zum Sicherungskasten). Vom Netzteil @0:31 abgelesen, sieht man, dass das Gerät maximal 3A braucht. Somit kann man sagen, dass die Kabel im Auto das leicht aushalten, sonst hätte der Autohersteller da keine 20A Sicherung verbaut. Jetzt sollte man natürlich nicht zu dünne Kabel verwenden, wenn man vom Zigarettenanzünder zum Lichtmotor geht. Generell kann man auch einfach das Netzteil aufmachen und den Holstecker mit Kabel auslöten / oder einfach abschneiden und dieses Kabel verwenden, denn dass hält die 3A auch aus. Ich hoffe das hilft dir und allen anderen, die sich das gefragt haben! Beste Grüße und Danke für den Kommentar!
I did not glue it and it still holds quite good. I have seen/read about people using Sprayglue or Hotglue. Sprayglue is probably the faster method than using Hotglue on each Fiber.
@@SalemMillion Yes, lights can be dimmed (around 10 Steps until near darkness). You can see on remote at 0:09 the top left buttons. "Sun Arrow up" and "Sun Arrow down"
Hey wie hast du es geschafft den Sternenhimmel eines "bestimmten" Tages auf das Dach zu projizieren? Ich meine hast du eine App oder eine Internetseite, wo du ein bestimmtes Datum eingeben kannst und dort dann der sternenhimmel des Tages gezeigt wird?
Das ging nur mit etwas Umwegen: 1. bin ich auf die Seite: www.meinfoto.de/configurator-starmap.jsf?product=2240&new 2. Datum und Ort eingeben 3. Sternbilder "aus" und Bild auf "Schwarz" stellen 4. das Bild mit STRG + Scrollrad vergrößern und per Screenshot speichern 5. Das erstelle Screenshot-Bild in Vollbild mit Beamer auf den Dachhimmel projizieren und die Sterne mit Edding markieren. Hoffe das hilft :)
I took of the Plasik covers of my D-Pillar and went down in my trunk. [On the left side (and also right side) i have a storage compartment for First Aid, and other stuff]. I rolled the rest of the fibers so they would fit in there, used two cable ties and put the Light/Motor also in there. You can barely see the compartment at 2:34 on the left side. This is problably different for each car. But the Star Light set i bought from the brand Chinly had a lot of cable lenght, so i could have easily went further in the trunk (for eample in the spare tire region).
For Power Connection you can just plug into Car Power Outlet (car lighter socket). Since i wanted a cleaner and more permament solution, i just cut the wire and connected to my car lighter socket from the back. Just solder to + and - cable. (My car had a Car Power Outlet in the trunk right next to the compartment where the Lightmotor now is).
Can be found on Amazon
(US) www.amazon.com/dp/B071WJYXBX
(U.K) www.amazon.co.uk/dp/B0791CX8M2
(France) www.amazon.fr/dp/B09CFZPSLJ
(Germany): amzn.to/2T5DecG
For india
Available in India ??
I saw a 30' van one evening that had fiberoptic on the side. Smiles.
This Is the coolest thing I have ever seen. Perfect for hanging out with that special someone or just alone listening to some chill music. Either way I was relaxed just watching it
Smoke a joint and rock a couple beers after work while sitting in the car 😴
@@catiloh6086 1qaarar
Thanks, if I had a car I would have done it! Very beautiful, very wonderful!
Thank you
This is so beautiful and unique!!!
Wow you are something else 👍👍
Looks so cool 😍😭😭 love it 👍🏼😍🔥🔥🔥🔥🔥
I didn't know this even was a thing but now must have it for a suv camper :)
First, great video, thanks for uploading.
Looking to purchase a kit however there are so many out there at the moment.
10w, 20w, 32w etc
I assume its all to do with power/brightness.
As you have installed the 32w kit, do you use the full brightness or have then dimmed down?
Have you installed different size fibres to make the sky light look more realistic?
Many thanks.
Good idea 💡
great job man ..planning to install this soon
So how did it go?
@@lettuce9612 well it works great but fiber optics has a lifespan though. The more heat there is the more cracks the fiber optics get and then the amount of light passing through the fiber optics reduces overtime . Probably should have installed some kind of heat protection sticker on the roof of the car before installing
@@varshan0645 what kind of heat sticker would you recommend?
Two questions: 1) Did you glue each fiber optic from the back of the headliner so that the final fibers got get pulled back into the roof liner? 2) How long did it take from start to finish for this 1000 fiber strand project? Thanks
Very nice brother
Wow magnifique
AMAZING!!!!!!!!!!!!
A lot of work. But turn out. So nicely
Good job
Thanks for sharing
😍😍😍😍 awesome yarr🔥
Amazing
So the left over wire can be cut without damaging it ??
its a lot of work but well worth it
NICE
Nice video 🙏❤️🙏
Super
बहुत शानदार
It's look really good
Thank you
Sieht top aus! Wie viele Fasern hast du für die helleren Punkte durch das Loch gesteckt? Und kannst du das Licht noch dimmen?
Ja das Licht ist dimmbar (bis es fast aus ist - schätze ca. 10 Stufen) Durch das selbe Loch habe ich nie mehrere gesteckt. Ich habe einfach mehre Löcher in einem kleineren Bereich gebohrt. Dass die Lichter unterschiedlich hell sind, ist dank dem "Twinkle" Effekt. Dadurch werden manche Glasfasern verschieden hell beleuchtet.
ആദ്യമായിട്ടാ കാണുന്നത്👍 I'm seeing this item first time
Hello
where did you place the module(light emitter)?
Wow, it's really awesome. 😍
is it a available in India??🤔
please provide buy link.🙏
Mast h bhai
Amazing Technology 😲😲
Is old
Wow... 😍
Excellent
Thanks
Do you think 1000 is enough or too much for your car? How much do you think a sedan headliner should have?
Where do you put the metal thing ?
Can you adjust brightness?
대박!!!👍👍👍👍
Bro I want this ❤️👍👍
What are the screws with the clear jewels for? I see them in a ton of videos but nobody says what they are for.
Wow!
Could you make The video about full installion. How to remove car indie roof panel, how to FIX Power and then how out roof back
This will most like be different in every car. This is why i did not show. Also installing Power is just plugging into Car Power Outlet (car lighter socket). Since i wanted a cleaner and more permament solution, i just cut the wire and connected to my car lighter socket from the back. Just solder to + and - cable.
Do u have a link to the lights??
who needs a galaxy inside his car?
Where are you getting power for the star lights bc you seem to be light them up from a outlet in your trunck
Looks good in 144p
I will get 2 but I want to daisy chain them can you do that?
My thing is will you see the hole in the day time or will it look like there is nothing there ?
Wow
Roll royal felling 😆👍👍
Where did u put the projector?
I want to do this to my car but do I have to remove the upper part of my car??
I saw this in my childhood. What s new in this
Can the twinkle be slowed down?
Hast du immer pro loch eine Faser gesteckt oder bei manchen 2,3 ?
They're twinkling waaaay too fast. Does it allow you to slow it down?
I like
Super hair lite
It's sad that the person who made this video can't speak. I hope one day God blesses you with a voice then you can't speak in the videos you make.
I think the person who wrote this comment is talking about me :D
It's not a movie to tell some story... Do u need subtitles too..for this vdo.. ok the I'll tell connect projector to power cable, then place fibres in drilled holes., Then connect fiber cables with projector light.. then cut the remain fiber cable...
@@factchristo6550 you seriously have a major problem in life.
@@0togtr811 I don't know whether u r telling real or not. I think u r criticising that person .. bcoz he never talked... So that I harshly commented to support that person.
@@factchristo6550 you have a major malfunction. All the comment was trying to was nice, which is exactly the opposite of what you were going for. Absolutely arrogant and inconsiderate.
Is it possible for convertible cars also ? Like BMW Z4 ?
Hast du die kabel an den Dachhimmel befestigt bzw geklebt wie andere es tun oder einfach den Himmel wieder dran gemacht
Can you leave link. I need this exact kit
I found the link to it I can send it to you if you want-
@@evie4564 yes
Very nice.. I'm guessing that takes a VERY long time to install
Thank you. It took me 2 full days.
Why mark where you going to drill them??
I used to think these were live wires when I was little
അടിപൊളി.. എനിക്കും എന്റെ കാറിൽ ഇൻസ്റ്റാൾ ചെയ്യണം... 💚💚💚💚
enikkkum
Always maintain extreme dark inside car to have clear visibilty outside in night.
Drive safe, keep less distortion.
Yes you can keep off during driving, but you can also turn down the light, so you barley notice it. Normal use it is not more intrusive than ambient light of Audi BMW or Mercedes.
Beautiful
What is music name.
The Song is from CZcams Creator Studio. It's called "Yard Sale" by Silent Partner
Nice but very big in size
extremlevel
ცrơ ơrɖɛr Ɩıŋƙ ʂɛŋɖ bro
Thats awesome what length of fibre is that?
Thank you, the lenght of my fibres are 5 Meters
Where did you hide the box
Мне кажется что это лучше чем в ролсройсе
Одним словом -Просто Космос
Wo hast du den Projektor versteckt?
Ist es denn sicher wenn ich das Gerät an 12V anschließe ? Wird das Kabel nicht zu heiß ?
Hammer Video 👍🏻
Das kannst du leicht checken:
Ich habe 2x Zigarettenanzünder im Kofferraum, diese sind zusammen mit einer 20 Ampere Sicherung abgesichert. (Da Hilft die Bedienungsanleitung deines Autos zum Sicherungskasten). Vom Netzteil @0:31 abgelesen, sieht man, dass das Gerät maximal 3A braucht. Somit kann man sagen, dass die Kabel im Auto das leicht aushalten, sonst hätte der Autohersteller da keine 20A Sicherung verbaut. Jetzt sollte man natürlich nicht zu dünne Kabel verwenden, wenn man vom Zigarettenanzünder zum Lichtmotor geht. Generell kann man auch einfach das Netzteil aufmachen und den Holstecker mit Kabel auslöten / oder einfach abschneiden und dieses Kabel verwenden, denn dass hält die 3A auch aus.
Ich hoffe das hilft dir und allen anderen, die sich das gefragt haben! Beste Grüße und Danke für den Kommentar!
What is the price and were do you stay
does this work with a car with panaromic sun roof
What did you use to glue them in place?
I did not glue it and it still holds quite good. I have seen/read about people using Sprayglue or Hotglue. Sprayglue is probably the faster method than using Hotglue on each Fiber.
Can you do this in your bathroom?
Is there a way to slow down the movement of the lights?
Yes, Motor Speed (Twinkle Speed) can be adjusted with remote or App
@@StoneTechReview You can dim them right ?
@@SalemMillion Yes, lights can be dimmed (around 10 Steps until near darkness). You can see on remote at 0:09 the top left buttons. "Sun Arrow up" and "Sun Arrow down"
I love you❤️
Can you put this light in crate and what will be the cost
Donde las consigo o por envío
ąɱąʑơŋ ơɖɛr Ɩıŋƙ ʂɛŋɖ bro
What kind of light is used led or laser ?
We’re did you buy the lights
😲😲😲😲😲😯😯😯wow
Q maneiro 😍
Price
Nice bro kitni ret lagti h
👍👏
Where did you buy it
Hey wie hast du es geschafft den Sternenhimmel eines "bestimmten" Tages auf das Dach zu projizieren?
Ich meine hast du eine App oder eine Internetseite, wo du ein bestimmtes Datum eingeben kannst und dort dann der sternenhimmel des Tages gezeigt wird?
Das ging nur mit etwas Umwegen:
1. bin ich auf die Seite: www.meinfoto.de/configurator-starmap.jsf?product=2240&new
2. Datum und Ort eingeben
3. Sternbilder "aus" und Bild auf "Schwarz" stellen
4. das Bild mit STRG + Scrollrad vergrößern und per Screenshot speichern
5. Das erstelle Screenshot-Bild in Vollbild mit Beamer auf den Dachhimmel projizieren und die Sterne mit Edding markieren.
Hoffe das hilft :)
cool video! I just want to know where you hide the box and how do you connect it to the battery, thak you very much!!
I took of the Plasik covers of my D-Pillar and went down in my trunk. [On the left side (and also right side) i have a storage compartment for First Aid, and other stuff]. I rolled the rest of the fibers so they would fit in there, used two cable ties and put the Light/Motor also in there. You can barely see the compartment at 2:34 on the left side. This is problably different for each car. But the Star Light set i bought from the brand Chinly had a lot of cable lenght, so i could have easily went further in the trunk (for eample in the spare tire region).
For Power Connection you can just plug into Car Power Outlet (car lighter socket). Since i wanted a cleaner and more permament solution, i just cut the wire and connected to my car lighter socket from the back. Just solder to + and - cable. (My car had a Car Power Outlet in the trunk right next to the compartment where the Lightmotor now is).
WOW 🤔🤔
Yeah
did anyone else think that this guy had an led water fountain going in the back of his car when they saw the thumbnail or is it just me?
:D love it
Wie und wo hast du es angeschlossen ?
Ahora se confundirán con mi Tsuru cuando le ponga esto
Isso vende no Brasil ? E o valor ?
Must not have a job, to much time on your hands. But vary awesome indeed 😎
Took me 2 days to install. Yes, it's a lot of work but can be done on a weekend.