As an expert the clamp shouldn’t be on the copper wires. The clamp has to be on the plastic sheath because when pulling it’ll expose more copper that will likely cause OSI Layer 1 problems. The only part of the modular plug that should be having contact with the copper wiring is the splices which sends electrical signals to the network.
@@nenon_night The jacket of the wire needs to be seated underneath the block that crimps down onto it. If the jacket is cut too far back, the connector won't crimp onto it, and the only thing holding the connector on will be the wire connections. While it might work for a bit, these wires are easy to break, sometimes in a non-obvious way because only a single wire fails.
No. Normal patch cables use the following order with pin side up: OW, O, GW, Bl, BlW, G, BrW, Br. Basically the green white and blue white wires are swapped.
@@teddybear7853connector is basically same it’s just the back side is lil thicker in Cat 6 connectors to accommodate thicker cat 6 cable with jacket and all to give good anchor but Cat 5 connectors work perfectly as they all are RJ45 at the end.
Damn , that has to be the smoothest straightening I've ever seen.
What a smooth straightening it is ❤
As an expert the clamp shouldn’t be on the copper wires. The clamp has to be on the plastic sheath because when pulling it’ll expose more copper that will likely cause OSI Layer 1 problems. The only part of the modular plug that should be having contact with the copper wiring is the splices which sends electrical signals to the network.
So what did he do wrong then cut the wires to long?
What's the correct way to do it
Cause I have a business proposal about this
Can you show this with bonded wires?
Clean work bro nice☺
👌Excellent!🙏.Thanks!
Finally someone who does it right!
not right actually
@@th3godofgenjutsuhow?
@@nenon_night The jacket of the wire needs to be seated underneath the block that crimps down onto it. If the jacket is cut too far back, the connector won't crimp onto it, and the only thing holding the connector on will be the wire connections. While it might work for a bit, these wires are easy to break, sometimes in a non-obvious way because only a single wire fails.
@@th3godofgenjutsu i understand thank you.
Thank you sir. Good video. Clean work. Thank you.
Very welcome
put the wire jacket all the way to the lock @@rahulkoge
Step 1.....slip the boot cover over the cable first !!!
Orientation of color of the cable thats why i whats
Thanks for the video
Thank you sir 🙏
Nice job !
Thanks!
Very Nice bro
nice
short and practical 😀--excellent
Are you on on a training program
Is it possible to do this without specialist equipment ?
no
you only need a crimper, they're cheap
Good
Yung kulay o color is important
Howd you do it without a passthru cable?
is the same process of the pass-through rj45 connector,
2:22 shouldn’t they be better arranged the green next to the white and green ?
No. Normal patch cables use the following order with pin side up: OW, O, GW, Bl, BlW, G, BrW, Br. Basically the green white and blue white wires are swapped.
He did it right
This confused me too when I was learning the wire-color ordering to insert into the connector.
He messed up lol
Didn’t get the plastic jacket in far enough
Ab tak Jitendra ho to Laga ke panch bhi kar deta hai
thanks bro ❤❤❤
Welcome 😊
all colours should be in line
❤❤❤best
Very useful
Thanks a lot
could you please do it with cat 6 cable?
It is already use this cat 6 cable,
You can tell this is cat6 because it had a ripcord and a separator
This is defenitly cat6 cable with cat5 RJ45. WTF??
RJ45 Jack name not cables...
ভাইয়া প্লাসটার দাম কত একটা প্লাস টান দি প্লেট এর দাম কত
YOU MESSED YOUR VIDEO WHEN IT CAME TO COLOR ARRANGEMENT
Super
Thanks
Op
Bhai pichhe ka cover toh lga lo
Cablr colour order pls tell
White/Orange-Orange-White/Green-Blue-White/Blue-Green-White/Brown-Brown
এই কাটার দাম কতো আর এটার নাম কি.....?
কাটার টার দাম কত
I have exam tomorrow 🤣
This is Cat5 connector and cut your fingernails
both cat5 and cat6 use rj45, there's no such thing as a cat5 connector
@@nefariou5 yes there is. When you're buying rj45 connector you need to choose which one
@@teddybear7853connector is basically same it’s just the back side is lil thicker in Cat 6 connectors to accommodate thicker cat 6 cable with jacket and all to give good anchor but Cat 5 connectors work perfectly as they all are RJ45 at the end.
His nails are much better than many from the region why these people keeps this disgusting thing its the basic hygiene 😂😂
It’s his choice to grow his fingernails. What’s your problem ?
ရထားလမ်း အိုကြီး ကျွန်တော်
wlay sounds
tq
Welcome
The color
Not a good vedio coz doesn't show the orientation of the color
Verry Bad.. Vlo hoini
I can make it better than this...
Ok, I will try.
😂😂I agree . I can also 😂
me 2
What can be improved? He did it perfectly. If I bought a cable, it looks just like this from the store. You guys... You all are some jokesters! 😂
lwdya@@1trillionviews516
OrangeWhite+orange+green white+blue, blue white green+Brown white+Brown
Right
Is it cross over or straight through