Packbrake Oil Filter Relocation Kit - Ram Rebel
Vložit
- čas přidán 23. 09. 2023
- In this video I install the Pacbrake Oil Filter Relocation Kit on my 2020 Ram Rebel. This kit allows you to move the oil filter away from over the CV/steering shaft to just behind the front side of chassis on the passenger side.
You can purchase the kit here: pacbrake.com/HP10363?Affiliat...
The kit is very straight forward to install and the machined parts feel robust. The fittings take some time to get the right angle but once installed the kit works and looks great.
Any other questions let me know! Be on the look out, I have some fun videos on deck for the truck.
Head over to my Instagram for more pictures and videos of my projects: / waterfowler_41
All my affiliate and coupon codes are here:
linktr.ee/waterfowler41
Coupon Codes
Diode Dynamics/FORM Lighting - Waterfowler41 for free shipping
Truck Trolley - WATERFOWLERFREESHIP for free shipping
Suspensionlifts.com - Waterfowler41 for 5% off
Shifts and Grins - waterfowler41 for 5% off
FitCAM - rfrram150 for 10% off
Brink Wheels - Waterfowler for $100 off your order
Corsa Performance - Waterfowler for 5% off
Jam Handle - Waterfowler41 for 15% off
Magic Brand - Waterfowler41 for 15% off
Lamin-X for 20% off your order, use this link: laminx.refr.cc/waterfowler41
Thanks for watching!
WF41 - Auta a dopravní prostředky
I made an upgrade to this kit and Packbrake was gracious enough to provide me with the fittings I replaced the 90 degree fittings with 45 degree nipples on both for best oil flow I was told 90 degree fittings will greatly reduce oil flow.
Awesome video as always!! Well done 👏🏻👏🏻👏🏻
Thank you!
I might do this down the road. For now, I just picked up an Oil Utter that I'll use for the next few oil changes, then decide.
Definitely can't wait to see this installation, I already have the Fumoto value. This will be the final piece to make all my oil changes less messy.
Right on!
Same here!
They are also available for earlier years (2009-2018). I admire how clean the underside of your truck chassis is, mine is covered in Fluid Film!
Yes that do have them for older rams.
Thanks. Great video.
I installed this kit at 1000 miles super easy oil changes now great video
Great to hear!
Because the relocation of the oil filter, any changes on the oil quantity? U do have to add more oil? Or level still the same?
@filipebmwm3 my truck measured within spec with 7 qts
I use about a pint more oil@@filipebmwm3
Water Fowler the 🐐🐐🐐🐐
Thanks!
I am installing a similar dual filter kit on my 21 1500 classic. Great video.
Nice 👍
I added this to my 2015 Ram Sport after changing the oil 1 time. Even with the plastic bags or form-able funnels it was a mess. Yah, it's pricey, still oil changes are a breeze and clean.
ooh I need one
Cool 😎 !
Enjoyed the video. Underside of your truck looks so clean for a midwestern vehicle! Do you pressure wash regularly in the winter or use another method to fight corrosion?
Thanks! Nothing special with my truck. Clean it every few weeks in the winter and park it in the garage as much as I can
Can’t want to see this. Been waiting to do it to my Rebel. Maybe now you can use the SRT filter as well.
Same
The video is LIVE!
Is that the same as the TRX filter? Is it longer or something?
@@jwhmerica504 I believe the TRX oil filter is MO-899. The filter I used is MO-339 and I picked it up from Advanced Auto Parts.
@@WaterFowler41 thanks for the reply. I ordered a case of the Wix XP from rock auto. They came out to $8 each of I remember right. From what I understand the mopar filter is a rebranded wix xp.
Awesome vídeo man. Need it to do on mine also. Very detailed information. Any problems with pressure and leaks? Thankyou
No problems at all!
Good video
Thanks!
This looks like a great upgrade. Im curious, if your oil temp would drop a litttle, seeing as cool air is now flowing around the filter?
I'm not sure but I see your angle here. Might drop it but only minimally since the plate is in front of the filter.
Great upgrade! Did you find if it takes any more oil than the 7 qts that’s recommended?
Not at all
Just installed on a 2022 Ram 1500 Limited. Thanks for the help on the video. Made the job go a lot quicker and easier. Certainly a better setup for changing the oil now. Oil pressure at 46-50psi and no leaks. Very nice quality on the parts. Hopefully it does not develop a leak down the road
Great to hear!
Great video, man. Thank you! Any issues in the couple months since installing?
Thanks man! No issues with the kit!
Sweet! Thanks. @@WaterFowler41
The crocs 😂
With socks too.
Can you please do a follow-up video with the cons if there are any in the future. Thank you in advance for your time.
I’m not sure there are going to be any to be honest. Oil pressure is within spec and my oil changes just became super clean. What more could you ask for!
I probably would do this too .. but the only thing I could see is future leaks possible.. other than that it's an awesome set up
If you install it correctly there’s not much to worry about.
I took it 1 step further and added a Hubb oil filter then went to an aluminum welder and had him weld in an Aluminum 1/8" alum weld bung for a 1/8" magnetic drain plug why? To make it easier when you remove the oil filter there is oil in the hoses and block that need to drain as well having the drain plug eliminates more mess to deal with and hot oil all over your hands while it's draining I have a second filter filled and ready to screw on. Another advantage I noticed by accident with the Hubb Filter for 5.7 Etorque is, for example, your braking slowing down for a traffic light then the light turns green when you hit the gas there is a jerky action from the trans looking for the right gear to be in, now with the 55 gallons per minute flow and I assume back oil pressure the trans knows what gear to be in for a smooth transition for acceleration its always in the correct gear now instead of being 1 or 2 gears too low or 1 gear to high I also noticed when slowing down for a turn when I come out of the turn and accelerate I'm in the correct gear making for a smoother ride no clanking under these driving situations I'm not an engineer or mechanic it's just a nice side effect of this combination. FYI I posted photos on Facebook and a mechanic said you should have 45-degree fittings on the filter housing to reduce more restriction of oil flow. I contacted Pacbreak and they were very helpful and sent me two 45-degree fittings customer service is great. Pacbrake 5-star👍Great video
Does it make the hemi require more than the 7qt of since it adds more lines for the oil filter system?
Nope it’s only minimal volume being added
I just bought 2024 Ram 1500 Limited. I would love to install this add-on to my truck. But, with this void my warranty?
Can you make a video on the bed lights?
Already did! It’s on my channel!
How has it been since install? My main fear are the hoses rubbing from vibration.
Still working as intended and no running whatsoever. During install you need to make sure you have clearance around everything
Would you worry about this if you do some mild to moderate offroading?
Not really as there’s plenty of frame below the filter. That said, I did install an Rci skid plate on my truck and it adds additional protection for the filter
I just installed this kit and I’ve noticed a 6-8 psi drop in pressure while at load. Have you noticed anything similar? (From 52 psi to 44 psi.) No leaks.
I haven’t noticed any drop in oil pressure.
@@WaterFowler41 interesting… it’s still within spec, so I guess I’ll just keep an eye on it. Thanks!
Hey, I just installed my,went for a drive, and I've noticed a drop in psi as well (4-6psi) worried the shit out of me. I stopped at my local auto parts, let the truck idle and now I'm at 31 psi
I think I’m gunna have to get this. The gallon bag trick is getting a little old.
That was my go to for a while but even that gets messy and having hot oil in a ziploc bag is less than ideal.
Can't seem to find this available anymore. Does the addition of something like this void/affect a warranty?
If you have an issue and its tied to the relo kit then yes, warranty coverage will be declined.
That said, if you install it correctly and properly maintain your truck, you should have no issues.
@CaptainRonAhoy so about seems pacbrake discontinued the old part number HP10363 19-24 rams & HP10362 09-23 classic to new part number HP10596 19-24 rams & HP10595 09-23 classic. Why the change? Who knows, but it's available just a different part number. I just purchased the 10595 for my 2014 ram 1500. I hope this helps.
@@WaterFowler41 Thanks for your input....appreciate it
@@greggorybrown9123 Thank you sir, I'm definitely considering this device.
Whats the serial of the Mopar Oil Filter?
I don’t know, I just went to advance auto and this is the filter the fitment catalog said fit my truck.
Know off hand the size wrenches?
I believe I mentioned the sizes in the video.
@@WaterFowler41 watched it a couple more times. Didn’t catch them. Not a big deal though.
Mine started to leak a little bit after 3-4 years installed. I have seen nothing in my driveway and just a small drop on the housing itself, maybe it's only leaking under pressure when engine is running.
Looks like it's coming from the big seal (blue part that replaced old filter). Hopefully I can retighten everything and it'll be ok. I refuse to go back to OEM filter location changes.
Is it leaking where the blue piece meets the engine block or where the bottom "bolt" meets the blue piece? Thanks in advance. 👍
Replaced both o rings with viton and still leaking. Where the blue piece meets the engine block.
Will this void warranty?
If any aftermarket part is the root cause of a failure that you are attempting to use your warranty to cover, then yes some parts MAY impact your ability to have the manufacturer cover repairs.
Two things:
1. If installed properly, this part has nothing but upside for benefits and will not cause any issues.
2. Warranty's are not an all or nothing thing. Meaning, if you have a lift it on your truck but your headlight fails, the manufacturer cannot decline covering the headlight repair since it has nothing to do with the lift. They manufacturer needs to be able to show that the aftermarket part, some how caused the failure.
Yes, any mod you do to engine will. Manufacture only needs one excuse to get out of replacing a 15,000+$ engine. Besides filter oil change is easy enough if done right.
@davejenkins7735 life’s too short to live in fear of warranty coverage. Install the relo kit properly and you’ll have nothing to worry about other than what you’ll do with all the spare time you have because your not cleaning up all the oil that spilled all over the cv and steering box.
Use 0w40 oil
Good set of how to's. I wanted to as you, to relocate the stoopid idiot engineering location of the OEM oil filter. Pacbrake was not available for me when I began to relocate my setup. I opted for the usual kits that were out there the past two yrs. First setup was totally useless, the Derale kits, rubber lines on aluminum fittings with a hose clamp, really? Even though cruising speed for my 1500 at about 75-80 mph, oil PSI was 53-55. The damn hoses still leaked. Kicked that to the curb, the next one, had actual custom oil lines made, very similar to the Pacbrake lines, found another setup thru Summit racing, seemed to be better engineering components, same problem, oil leaked pas the elbow fittings. My intentions were good, at first, I was able to fit a bigger filter as well, thinking more oil to filter etc. I haul a race trailer, I usually chge the filter out between the usual chgs, its cheap, and of course easy to get too. Now that Pacbrake is available, gonna get one thxs
one more thing, idiot engr design team knuckleheads were at it again. ABS plastic tranny pan with a built in filter? Exhaust cross over pipe actually blocks the drain hex head bolt? OMG! Pulled that crap off and bought the 8HP70 PPE Transmission Pan Filter, from Pacific perf. engr. Actual drain bolt that drains , no obstacles, filter bolts in.
Not worth it mine leaked after 1.5 oil changes. 3 qt low on oil and oil everywhere underneath. All the hose end are rusted out not even winter yet. Wish i can get my money back.
The kit won’t leak if it’s installed correctly. Sounds like it wasn’t properly tightened
Yeah sure man it was my fault. Good luck to you.
I get the impression that this will void any warranty the vehicle may have.
If it is the root cause of any issue, yes but if installed correct this won’t cause any issues so no impact on warranty assuming you have a competant installer
Have you run across any issues with this yet?
Nope
How has this Pacbrake held up after 7 months. Any issues? Oil leaks?
no issues when I owned the truck.