Finally a method that really works (Method 2). I watched 10 of these videos today and this is the only one that apperantly still works in July 2023. Thanks man!
i got this problem on method no. 3 set-mppreference : You don't have enough permissions to perform the requested operation. At line:1 char:1 + set-mppreference -uilockdown 0 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (MSFT_MpPreference:root\Microsoft\...FT_MpPreference) [Set-MpPreference], CimException + FullyQualifiedErrorId : HRESULT 0xc0000142,Set-MpPreference
Real-Time Protection is off. Do not turn on real time protection. What can I do? please help me. 3rd step problem is: set-mppreference : You don't have enough permissions to perform the requested operation. At line:1 char:1 + set-mppreference -uilockdown 0
I did method 2 and method 3 and it doesn't work. I went to Hkey_ LOCAL MACHINE\SOFTWARE\Policies\Microsoft Windows Defender Policy Manager and changed the value of Allow UserUI in 1. Hope it helps
Bro what do I have to do im new at using pc so I don't know how it works can you explain a bit more I went to policy manager but it doesn't have allow user option
1st method was not working because windows defender advanced threat protection was not there in the list, only windows defender firewall was there, hence i tried method 2, then method 3. It worked. Thank you so much man, keep doing this great work. Really appreciated.
@@gamingwithproyt1643 i got it bro!! Go to Hkey_ LOCAL MACHINE\SOFTWARE\Policies\Microsoft Windows Defender Policy Manager Then Allow UserUI access and double click it and change it's value to one
'set-MpPreference : Provider load failure At line:1 char:1 + set-MpPreference -UILockdown 0 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (MSFT_MpPreference:root\Microsoft\...FT_MpPreference) [Set-MpPreference], CimException + FullyQualifiedErrorId : HRESULT 0x80041013,Set-MpPreference " when i tried the last method, this error was shown. and i tried the first 2 and it didnt work
Worked yesterday and now i cant access the virus and protection page again, when in the third method windows powershell when i type in the command it says that i dont have the permission to use that command
set-mppreference : Invalid class At line:1 char:1 + set-mppreference -uilockdown 0 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : MetadataError: (MSFT_MpPreference:root\Microsoft\...FT_MpPreference) [Set-MpPreference], CimException I'm faced with above error using method 3 , what should I do?
Hey brother! My virus and protection is working. But there is no firewall and account protection and some options not showing in windows security. They're showing up in start option and when I open it, it shows page not available.
Hey thanks man, this worked (second method followed by first one). I've seen other videos too and was very confused as to belive them or not but I tried your tutorial and it worked on first try. Actually I was first watching this in incognito (as I don't want tutorial vids in my recommendation) but your video worked so well that I came here to like and comment. To anyone who's reading this and is suffering from the same problem, you can trust this guy (this video atleast as this worked for me). • Also you can ask me anything in replies to insure I'm not a bot :) Edit : it didn't work :( actually it did work for some time but then again after some time (1-2 min) it went bad. You can try tho, maybe it would work.
@@Aayan1942 hey man if you're suffering from this problem just reinstall windows (that's what I did) and by chance if you don't have a genuine windows key, go to those shops which will give you a windows for 150rs (around 200-300 pakistan money) have a good night.
@@pervy_indianweeb8773 i tried method 2 and for some reason it said i don't have enough permissions. i assumed this was because my acct wasn't admin but i check and it was. perhaps you have any other solutions?
already tried all 3 but all failed......in the final method it also says : set-mppreference : You don't have enough permissions to perform the requested operation. At line:1 char:1 + set-mppreference -uilockdown 0 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (MSFT_MpPreference:root\Microsoft\...FT_MpPreference) [Set-MpPreference], CimException + FullyQualifiedErrorId : HRESULT 0xc0000142,Set-MpPreference
To resolve the issue go to 1) windows 10 settings > update and security > recovery > reset this pc > keep my files and proceed 2) windows 11 Settings > system > recovery > reset this pc > keep my file files Proceed with onscreen instructions Note :- it will delete all your installed apps but keep all your files
File corruption. Open command prompt as an admin and type the following commands one by one after each restart : Sfc /scannow Dism /online /cleanup-image /restorehealth
set-mppreference : You don't have enough permissions to perform the requested operation. At line:1 char:1 + set-mppreference -uilockdown 0 + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
my laptop become bootloop after the real protection if off(after i restart it)..is that because my windows is not genuine?..because my laptop is second hand
Bro thanks for the last method it worked successfully.😊Thanks very much.
Happy to help
Finally a method that really works (Method 2). I watched 10 of these videos today and this is the only one that apperantly still works in July 2023. Thanks man!
Happy to help.. please support me by subscribing to my channel.. it would be great help to me 🙏🏻😊
I have tried many tutorials, method 3 worked perfectly
Thank you boe.👊
Happy to help.. please support me by subscribing to my channel.. it would be great help to me 🙏🏻😊
@@LotusGeek I am Getting this Error :
"set-MpPreference : Failed to modify preferences.
At line:1 char:1
+ set-MpPreference -UILockdown 0
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_MpPreference:root\Microsoft\...FT_MpPreference) [Set-MpPreference
], CimException
+ FullyQualifiedErrorId : HRESULT 0x80070057,Set-MpPreference"
I checked lots of websites and landed here and problem is resolved by last method in windows 11. Thank you
Always welcome
i got this problem on method no. 3
set-mppreference : You don't have enough permissions to perform the requested operation.
At line:1 char:1
+ set-mppreference -uilockdown 0
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (MSFT_MpPreference:root\Microsoft\...FT_MpPreference) [Set-MpPreference],
CimException
+ FullyQualifiedErrorId : HRESULT 0xc0000142,Set-MpPreference
LAST STEP SOLVE MY PROBLEM, THANK YOU SO MUCH AND YOU SAVE MY TIME. THANK YOU REGARDS PG GAMER
Happy to help
the only video out of a hundred that actually worked
Please subscribe to my channel if it’s working and help me growing. That would be great help from you 😊🙏🏻
Thanks man u earned a F****KIN SUB, the third options worked, i was worrying lmao. i thought i got hit with ransomware
I take my hat off for you Sir, you know your stuff...
Thank you.. please subscribe and keep watching my videos 😊🙏🏻
I did the registry method your the best bro you got a sub
Thank you bro 😊
The third method works. Thanks bro!
Always welcome
Real-Time Protection is off. Do not turn on real time protection. What can I do? please help me.
3rd step problem is: set-mppreference : You don't have enough permissions to perform the requested operation.
At line:1 char:1
+ set-mppreference -uilockdown 0
Try to execute Powershell in Admin Mode. It solved my error :)
I did method 2 and method 3 and it doesn't work. I went to Hkey_ LOCAL MACHINE\SOFTWARE\Policies\Microsoft Windows Defender Policy Manager and changed the value of Allow UserUI in 1. Hope it helps
Thanks bro you saved me
You are a God sent, thank you!
OMG!! I've been scouring the internet and tried so many methods, all these included, many times over. But your one line saved me!!!
thanks!
Bro what do I have to do im new at using pc so I don't know how it works can you explain a bit more
I went to policy manager but it doesn't have allow user option
Thanks for it...last option worked for me. Again thanks ❤️❤️
Happy to help.. please support me by subscribing to my channel 🙏🏻😊 it would be great help to me
the last method says: mppreference : provider load failure
please help
That's Work for me bro~
16/01/2023
Thanks Brody~
Always welcome 🙏🏻
You saved me! Thank you, man!
Finally there is a video I made successfully! you are the best
Happy to help … please support me by subscribing to my channel.. it would be great help to me 😊😇
I subscribed to your channel
Thank you so much 😊🙏🏻
Thanks bro so useful your last method
Finally the last step helper after hours of frustration ♥️
Thank you for saving our time
Happy to help 😊
thnx a lot brother u finally fixed my problem and im very glad that i watched ur video...... 💖💖💖💖
Happy to help 😊
Last method worked for me on Windows 11. You earned a subscriber.
Thank you 😊 please keep watching my videos too 🙏🏻
Thank you bro!
Any time
i cant find my security center, can u help me?
YOU ARE A LIFE SAVER .. METHOD 3 WORKED !
Always welcome 🙏🏻
Working. Thanks for the solution. Tried a lot but this one worked.
Thank you brother,,,,very helpful video
Please help me growing and subscribe to my channel and get more such videos 😊🙏🏻
Bro what's the solution of this ( Your administrator require security scan of this item ) how to scan it?
Thankyou last method worked
Happy to help.. please support me by subscribing to my channel.. it would be great help to me 🙏🏻😊
thank you brother, last method work me hahaah, good luck for your channel
Thank you. Please share and subscribe as a support for me and my channel 😊
finally, I found the right video, thanks infinity:D
After press S...Security centre option is not showing
Third method is too easy. It worked. Thanks a lot bro
Please subscribe to my channel and keep watching my video. It would be great help to me 🙏🏻😊
still not working until on the last step :*(
Finally got the correct solution
Thanks
Please subscribe to my channel if it’s working and help me growing. It would be great help from you 😊🙏🏻
1st method was not working because windows defender advanced threat protection was not there in the list, only windows defender firewall was there, hence i tried method 2, then method 3.
It worked.
Thank you so much man, keep doing this great work.
Really appreciated.
It didn't worked for me could you plss gelp
@@Hiraishin_fps Same if you find anything pls tell me
@@gamingwithproyt1643 i got it bro!! Go to Hkey_ LOCAL MACHINE\SOFTWARE\Policies\Microsoft Windows Defender Policy Manager
Then Allow UserUI access and double click it and change it's value to one
@@Hiraishin_fps Dosent work i think my pc has a virus
@@Hiraishin_fps this worked thank you
Thnx Bro You helped me!
You have a new subscriber!
Thank you 😊
Finally here comes the life saver! 🖖🏻
Thank you, the last method is really work for me
Thanks, indian youtube channel sure godly, this issue is fired by a ransomeware, dont forget to do full scan after you fix this ui problem
Tq bro you only real CZcamsr❤❤
Always welcome.. please support me by subscribing to my channel,. It would be great help to me 🙏🏻😊
not working on me...why?
Am so grateful third method worked for me on Windows11
Last method worked !! thank you !
Happy to help
Thankyou so much! it work for me with method 2
Method 2 worked for me ....thanks alot
Happy to help.. please support me by subscribing to my channel.. it would be great help to me 😊
'set-MpPreference : Provider load failure
At line:1 char:1
+ set-MpPreference -UILockdown 0
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (MSFT_MpPreference:root\Microsoft\...FT_MpPreference) [Set-MpPreference],
CimException
+ FullyQualifiedErrorId : HRESULT 0x80041013,Set-MpPreference " when i tried the last method, this error was shown. and i tried the first 2 and it didnt work
Same brother...did you find any solution?
@@naitiksrivastava1919 Download an antivirus. after some time, i saw it getting bac suddenly. but nonetheless, i still kept the AV
thanks a lot
You are most welcome
Thank you... it's working... finally i found right vedio..
Thanks the third option works well.
thank you very much
you saved me ❤❤❤❤
Glad it helped!
Wostttt best tutorial 🔥🔥🔥
Thank you 🙏🏻
Thank u so much yar.. ab jake problem solve hui
Thank you. The last method worked
thank you so much you don t know how mcuh this helped me
Thank you 😊… please support me by subscribing to my channel.. it would be great help to me 😇
Great ❤
Happy to help
thank you!! the third method work for me!
Worked yesterday and now i cant access the virus and protection page again, when in the third method windows powershell when i type in the command it says that i dont have the permission to use that command
Run it as an administrator
set-mppreference : Invalid class
At line:1 char:1
+ set-mppreference -uilockdown 0
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_MpPreference:root\Microsoft\...FT_MpPreference) [Set-MpPreference],
CimException
I'm faced with above error using method 3 , what should I do?
God bless your soul. You've earned yourself a subscriber.
Thank you sooo much 😊
Thank you so much
Glad it helped
It works. Thank You so much.
So many tried, thanks this time.
Always happy to help.. a humble request you to please subscribe and share my channel as it helps me grow. And keep watching my videos 😊🙏🏻
thanks, brother i also used last step thanks again
there is no windows defender in my services it hass only windows firewall, what can i do??
Reset this pc by going to settings menu
Thank you my dude :D big help
thank u sir.after 10 videos waching and worked this video.
Please like share and subscribe my channel
@@LotusGeek sir pls does this work on windows 11
Yes it will
thanks a lot. i use windows 11 and the 3rd one works well for me
what do i do if i dont see the windows defender threat protector service ?
detailed video! hats off to you.
Always happy to help 😊
IT WORKED TYSM I subbed and liked
Thanks a lot and keep watching LotusGeek
Thanks a lot mahn, your steps finally helped.
Not even official microsoft forums could help me out with this issue, thanks again
Thanks a lot
Why should i select 32 pit.. Am using 64pit laptop
So nice.. Thank you so much
Still the issue persist. I'm getting an error in 3rd step saying "provider load failure". Can you help please?
Settings > update and security > recovery > reset this > keep my files
This will reset your system help you fix the issue
@@LotusGeek Thank you
OMG!!! You saved me!!Thank you very much!!!
Happy to help
for the last option i'm getting the error has operation failed
THANK YOU !
Bro last option not work in computer and error occurred like, invalid class , please help
Hey brother! My virus and protection is working. But there is no firewall and account protection and some options not showing in windows security. They're showing up in start option and when I open it, it shows page not available.
Try this :
Settings > update and security > recovery > reset this pc > keep my files
Pls help me i can't do 3rd step and is saying can't...
Thanks
Thanks dude big help....
Hey thanks man, this worked (second method followed by first one). I've seen other videos too and was very confused as to belive them or not but I tried your tutorial and it worked on first try.
Actually I was first watching this in incognito (as I don't want tutorial vids in my recommendation) but your video worked so well that I came here to like and comment.
To anyone who's reading this and is suffering from the same problem, you can trust this guy (this video atleast as this worked for me).
• Also you can ask me anything in replies to insure I'm not a bot :)
Edit : it didn't work :( actually it did work for some time but then again after some time (1-2 min) it went bad. You can try tho, maybe it would work.
OO
@@Aayan1942 hey man if you're suffering from this problem just reinstall windows (that's what I did) and by chance if you don't have a genuine windows key, go to those shops which will give you a windows for 150rs (around 200-300 pakistan money) have a good night.
@@pervy_indianweeb8773 i tried method 2 and for some reason it said i don't have enough permissions. i assumed this was because my acct wasn't admin but i check and it was. perhaps you have any other solutions?
It says in PowerShell that I don't have enough permissions to execute the command.
Choose the powershell to run as administrator
still not working bro, help me
Thank you so much brother, it worked for me
12.30.2022
Edit:
It turned off again
It still says IT administrator......
already tried all 3 but all failed......in the final method it also says : set-mppreference : You don't have enough permissions to perform the requested operation.
At line:1 char:1
+ set-mppreference -uilockdown 0
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (MSFT_MpPreference:root\Microsoft\...FT_MpPreference) [Set-MpPreference],
CimException
+ FullyQualifiedErrorId : HRESULT 0xc0000142,Set-MpPreference
brother i got same error. Please tell if you found solution
Thanks!
Please subscribe to my channel if it’s working and help me growing.. it would be great help to me 😊🙏🏻
Windows defender advanced option is not availabe in my list.. Instead there is windows defender firewall properties.. What to do?
same bro if you have found or if you find something please tell me lso
To resolve the issue go to
1) windows 10
settings > update and security > recovery > reset this pc > keep my files and proceed
2) windows 11
Settings > system > recovery > reset this pc > keep my file files
Proceed with onscreen instructions
Note :- it will delete all your installed apps but keep all your files
thank you so much sir
I can not find "window defender advance threat protection.." in the service.msc
Wt seems to be the brblem
File corruption.
Open command prompt as an admin and type the following commands one by one after each restart :
Sfc /scannow
Dism /online /cleanup-image /restorehealth
Omg thank thank thank thank you so much ❤❤❤❤❤❤
thank u somuch man
Always welcome 🙏🏻😊
set-mppreference : You don't have enough permissions to perform the requested operation.
At line:1 char:1
+ set-mppreference -uilockdown 0
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
brother i got same error. Please tell if you found solution
@@sush9889 yes I did
@@priceless1379 bhai please tell
@@sush9889 run - regedit - delete windows defender , when you get same problem do the same . or just change windows to winodows 10 pro .
Thank you very much you saved me
Happy to help.. please support me by subscribing to my channel and keep watching my upcoming videos 😊🙏🏻
in the power shell it says
set-mppreference - you don't have enough to perform the requested operation
Open powershell as an administrator
@@LotusGeek how pls tell me
Open start menu and type “powershell” now right click on powershell icon and choose run as administrator
my laptop become bootloop after the real protection if off(after i restart it)..is that because my windows is not genuine?..because my laptop is second hand
No that’s not the issue at all.. it can happen to anyone
@@LotusGeek okay thanks.. I'll try your method..
love u thank u
Happy to help.. please support me by subscribing to my channel.. it would be great help to me 🙏🏻😊
Thanks a lot man.