How To Install Sea-Doo Snap-In Fenders = 2021 RXP-X 300
Vložit
- čas přidán 26. 07. 2024
- QUICK AND EASY INSTALL!
Only took less than 10 minutes to install this Snap-In Fender Kit on my 2021 Seadoo RXPX 300. This will save your ski from ugly dock rash.
amzn.to/3lNsi13#RXPX300 #HowTo #Seadoo
⚡️Please LIKE, COMMENT, and SUBSCRIBE......⚡️
FOLLOW 👀 ALVEAN AZURIN
Instagram: Alvean_Azurin
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MODIFICATIONS to Seadoo Spark Trixx:
Rear Exit Exhaust - www.wetjetperformance.com
Modified Water Box - www.wetjetperformance.com
120HP Tune - www.reliabletuning.com (message me for a discount)
Intake Grate - Riva
12/14 Impeller - Solas = amzn.to/2XGbDRo
Riva Sponsons = amzn.to/3ioWH1M
____________________________________________________________________
If anyone is looking for a jet ski cooler / fuel rack go check them out, they offer a rack for all skis and even to custom jobs if needed.
www.PwcSuperRack.com
Use “ALVEAN10” to get a 10%off discount
SURECAN FUEL = amzn.to/2DxUG4L
____________________________________________________________________
CAMERAS:
Insta360 = www.insta360.com/sal/one_x?in...
Insta360 OneR= amzn.to/3fK6eid
GoPro Max 360 = amzn.to/2EWPzvc
GoPro 8 = amzn.to/3imKlaw
Starter Kit = amzn.to/3ilIfHV
___________________________________________________________________
SUNGLASSES 🕶:
www.blenderseyewear.com/?rfsn...
Discount Code: Alvean16
___________________________________________________________________
GEAR:
-Jet Pilot Vest, Seadoo pullover vest, Seadoo Air Flow,
___________________________________________________________________
www.Cliqproducts.com
Discount code = CLIQJETSKI10
____________________________________________________________________
Houston Jet Ski / Extreme Jet Ski / Xtreme Jet Skiing / Texas Jet Ski
Sea-Doo Spark Trixx Life Vest, Life Jacket, Seadoo, Spark Evo, Gopro Hero 8, Gopro7, FLSkiRiders, Florida Ski Riders, Riva Racing, Jet Ski Life, Waverunners, PWC, Kawasaki Ultra, Yamaha, Honda, iPhone 11 Max, Apple, 2020 Seadoo GTX 300 Limited, 2020 Seadoo Spark Trixx, Turbo, Boosted, Boats, PWC Super Rack, SureCan, Ocean, River, Bayou Riding, Lake, Fails, Funny, Seadoo Accessories, Drone, DJI, Insta360 One X , Insta360 One R, Yamaha FX SVHO, Yamaha FX Cruiser, Yamaha VX, Yamaha GP1800, Yamaha EXR, PWC SUPER RACK, fuel rack, The Watercraft Journal, TFL Offroad, camp chairs, beach chairs, Seadoo accessories - Auta a dopravní prostředky
A very thorough “how to” video. All your videos have me anxious for spring when I can get my sea-doo out of winter storage.
Thank you. It’s warm now!!
Great video; thank you - no waffle, just useful facts and showing every step/tip.
Great video linked to the installation of the snap-in fenders
Great guide. Thank you for this video. Very good information on how not to mess up and actually showed how they snap in.
Thank you 🙏🏼. More videos to come.
Wow, thank you! I was actually looking for this on my new rxpx as well!! Dealer wasn't sure actually.
Perfect! Glad the video was helpful to you. Shame on the dealer.
Thank you! Great instructions and advice.
Great video! I'm installing mine today...
Nice job! Excellent video and just what I was looking for to install my new bumpers on my GTi. Liked the idea of using the blocker to prevent drilling into the other side of he fiberglass. Thank you!
Thank you. Glad you found the video useful. 😁
thanks, I just purchased a 300RXT Sea Doo 2021, the dealer wanted 500 to install. With your help Im doing it.
Thanks for the insights Alvean!
Thank you 🙏🏼
Great video, nice tips. Thanks! 😎
Great review!!! Keep them coming!!! ❤️❤️
Thank you ☺️
Pretty simple, Thank you 😊
I just bought a 21 GTR230 so this helps tremendously! Thanks
Your welcome! 🤘
Love these fenders!! Great video
Yes! It keeps my skis looking fresh!
Nice tip with the protection cardboard and tape.
This was a great vid. Thank you
Thank you 🙏🏼
GREAT CONTENT 👍🏼
Would love to see some more videos!
Really informative and welldone video, thanks!!,
Thank you !
Great Vid. Thanks!
Damn you a pro girl! Looking forward to more videos. 🤙
No pro but thank you 🙏🏼
Very informative thank you
Like a BOSS, Great Job:)
Girl you’re pretty handy! 👍🏻
Thank you. I like to try to do things myself and learn things. 😁
Very good job
Great video and thank you! Do you know if I can install a 3rd one in between the 2. I do have a stereo. Will I jeopardize going through the wires? ty
i hope u rember me and just remember i was here from day one and remember me when your even more famous
😂🤦♀️.... of course! thank you for being one of the OG Supporters of the channel 😁
@@AlveanAzurin why u do the emoji i was in the destin one i told u i saw u and i told u to go to canyon lake
berry good~~^^
Good 2 know, thanks.
You’re welcome!
If only one kit better on the left for refueling 👍
Another good video. My wife and I watch your videos since were in NY and our GTI 170s are away for the winter. I know you just put them on but have you used them at a dock yet? What are your thoughts on how they perform in rough conditions? Thank you for any info you can give. And keep the videos coming!!
Thank you for supporting the channel. 🙏🏼
I have been using these over 5 years now. I think they do a great job for non rough water dock conditions. I have used them a couple of times while the water around particular docks were rough and have seen them fall off which of course the ski got scratched. I now just try to avoid docks that have rough water around them all together bc you would need huge multiple bumpers to protect your ski anyways.
@@AlveanAzurin Thank you that was helpful information
Great video, thanks a ton for all of the content. I installed the fenders on a 21 gti se and took it out for the first time 2 weeks ago. I noticed splashing to the point of soaking the third seat when I would go around 15-20 mph. The water was hitting the back bumper bracket just right. Do you have any splashing? Thanks!!
Yeah I i’ve noticed when going slow the rear mount the splash up a bit. I may change it to the older mounts That go to the GTX.
I’m completely amaze by your knowledge about tools and installing things.. Your father should be proud.. lol
Lol... I like to learn things as much as I can. Thank you 😊
Does it matter whether it’s install port/starboard side ?
In general, would it be better to use a sealant when making holes to make. Water tight seal to prevent water getting in the ski? Thanks. I’m learning a lot from these videos.
where the holes were drilled its in a spot that has no risk of water getting into the ski. there were no holes made in the hull but on the outside trim
Does the screw go into the body that the rubber strip is sitting on? My bolts are longer than the thickness of the rubber and will penetrate what the rubber is sitting on. 2024 Seadoo GTX Limited
Why didn't you use the T1 center drill as suggested by BRP? I don't have one so I would prefer to skip that step if advisable.
Hi does this work on a 2020 KAWASKI sfx160x?
Did you install the bilge pump? Love to see a video on the bilge install for the RXP.
Same
Not yet but I think I will.
Would be good to see it at the dock
In some of the videos, you can see me use them at the docks.
Great. What do you think of the bilge pump? Do we need a bilge pump in new seadoos?
I have a bilge installed in my GTX300 and Trixx but haven’t had any issues. It is a nice back up to have for your piece of mind. I may install one in the RXP but would like to put the drain where I can see it when riding.
Nice Video 😎 I’ve got the new 2021 GTR & just purchased the Fenders & Kit. But I purchased the 295100729 snap in kit. They appear to fit pretty similar. It says in they fit 2019 and up.
This kit drills screws in horizontally and not at an angle. I have seen some use the smaller mounts but 3 holes are required for each mount.
@@AlveanAzurin yeah I’ve seen the 3 hole mount. But My dealer sold me the other two hole mount. The ones you used are the new 2021 style mount by the looks. 😎
How to install a ladder
Do you have a video on how to install a tow hook grr 230? I was hard to reach it. Thanks
No Unfortunately I do not have one.
I dig the new ski! Did you get rid of your GTX!?
Of course not 😏
Right on!
I just bought these but sending them back. I’m not trying to drill no holes in the gtx 300 limited. Should of watched first.
👍😘
When are you going to upload the break in part 2 video
Uploading today 😁
did you figure out the splashing to the rear seat problem? I just got the bumpers for my 21 rxtx and now i’m debating if i should installed them.
A little but not much. It’s mainly when you are riding slow and tilted more to one side.
I think I saw some scratches on the fiber glass.
the best girls
Aww thank you 😊
Nice. Do you have the usb charger on it?
No unfortunately not
Check that back screw Alvean. It look really loose when you put the bumper on.
Thank you 😊. I tightened them a little more after videoing.
@@AlveanAzurin Oh your welcome. Did want to have that fly off after one of your 180's on the ski.(After the break in period of course). :)
I ordered these with my new 2021 GTX230. Hopefully it is worth it. Still waiting for the ski
How did it turn out?
@@AlveanAzurin well I never got the GTX230, too many delays so I ended up getting a RXTX300 instead because they had one available. Still with the fenders. Love them. Easy to put on & protects the ski 👍
@@tygallow3013 still a great ski!! Glad you are enjoying it 😁
Another thing you can do is put a piece of tape on the drill bit. That way you know when to stop.
Hi Alvean, I had the dealer install on my rxp300 but when I ride I am constantly getting splashed on whether I ride by myself or with a passenger. When the water hits the install kit it creates a constant wave
Are you riding with the bumpers on? If so, you are suppose to be bc most Seadoo hulls do a great job of keeping spray away from the riders.
@@AlveanAzurin did you mean to say that you’re NOT supposed to be ridding with the bumpers on?
No, I am not riding with bumpers on. I noticed at the dealer they installed at 19 inches instead of 18 and at 65 instead of 64 inches with speakers
So are these safe to keep on while riding? Or they have to be removed each time you ride it
Definitely take off...they have a lot of drag and could wrip off
I installed mine today on my RxtX and my screws don’t stick through like yours. I don’t think you installed them high enough or the positioning on mine is different.
Yours are different.
Is it a factory defect or a dealer error at installing them? Please advise
I think it might be user error. I’ve noticed some people have been riding with the bumper/fenders on and you aren’t suppose to.
is any sealant/epoxy needed?
No, The kit does NOT go through the HULL, Just the outer lip.
Are you going to add the riva Sponsors?
Not sure 🤔. I like the way it handles so far.
@@AlveanAzurin I have just ordered them for my 2020 rxt
Seems like they made the bumpers come up higher Rather than we’re on the ski. Not much protection.
They work great on calm waters but are known to bump off with Rough docks.
I need ...i have to buy.
Yes! A must have accessory.
Is the ski broken in yet, bet your chuffed with your new ski
It’s completely broken in now. Day 2 video of break in is uploading today.
@@AlveanAzurin Great! Bet your chuffed with your new purchase.
@@dazzler5012 yes I am!!! 😆
The cheap ass piece of plastic used as the retaining post (built into the foam fenders) is awful, breaks very easily, I regret getting these. Waiting for somebody to come up with a good way to replace them with something metal from a hardware store. Did you have the same experience?
No, I haven’t had that happen to any of mine. But then again I hardly ever dock anywhere that’s rough waters. If I have to dock at a rough dock, I look for a spot where I can hook up dock lines at a angle to keep my ski floating away from the dock.
@@AlveanAzurin good call, I will probably do the same, unfortunately it was my 14-year-old son who was a bit rough taking it off and he snapped it down at Matagorda Harbor :(
They are $130
If I have to drill holes in my equipment, it's not a "snap-in" kit lol. Shame on them for calling it that. Great video by the way.
They are "snap-in fenders" but you do have to install the mounting kit only once.
It's "Snap in" on a Spark, Anything else is a specific kit:/
Looks like you either were going to or just got out of work and didn’t have a chance to get some sweats or something on. What the hell
😂
Can I get a shout out plz?
I can try! 😁
These things are poorly made. I installed them on both my 2021 gtx 300 limiteds. They easily get knocked off the ski while docked, then you gotta go get it before it floats away. Huge waste of money. The plastic brackets cause additional drag when you’re moving.
I’m gonna replace the rub rails, then throw these darn things in the garbage 😡
Don’t throw them in the garbage! Mail them to me if you truly don’t like them. I will pay for shipping.😂..
They are really not meant for any docks with high traffic and rough. My friend and I recently did a little modification to them adding a leash/tether to them which makes them securely stay on. I just use them in Bimini Bahamas having to leave my ski in the water over several nights and they stayed on with no worries.
@@AlveanAzurin they’re too expensive for the amount of goofing around that needs to be done, in order to get them to stay on. I ordered some Velcro cinch straps to help secure them down. I’ll share my results when they arrive.