Video není dostupné.
Omlouváme se.
Johnson 9.5 HP Teardown - Part 3; Carburetor & Fuel Pump
Vložit
- čas přidán 1. 05. 2017
- Carburetor Repair Kits: everythingoutbo...
Hose clamp pliers: amzn.to/2t8DaKx
I am participant in the Amazon Services LLC Associates program, an affiliate advertising program
designed to provide a means for sites to earn advertising fees by advertising and linking to
products.
Hi Brandon. Your videos are great. I have learned a lot from watching them. At 1:40 seconds you mentioned a screw that can't be accessed without taking the flywheel off. That scared me because, I don't have the puller. However; I put the motor in forward and opened the throttle and I could see the screw. I tried my 3/8 screw driver but, it was too big to turn the screw. I tried a smaller screw driver and I was able to turn the screw. Whew!!!! Thanks again, keep going strong, brother.
I was in the process of taking out the flywheel while fiddling with the gears and was able to take out that last screw. phew..
Brandon please do a carburetor rebuild video. You are the man brother
I have a 9.5 I've been thinking about doing.
I'll get started on it....
Gracias amigo por compartir tus conocimientos, ese motor 9.5 hp fue un icono en los Estados Unidos, aqui en mi Pais quedan muy pocos operativos. Saludos.
Bueno, no muchos ya están aquí.
Hey man can you do a carb rebuild on a 9.5 like this!!!!!
At the beginning of the video you had the idle adjust needle removed. Mine is stuck and just spinning can't screw in or take out. How did you remove and put back in?
What year is that engine ????
My 9.5 runs good but I have some questions maybe you can help it runs good up until you get the tiller handle to "fast" and then it spits and sputters you know what that could be?? And I replaced my fuel pump but when I put the linkage back together it drives fine but won't go back into reverse now??thanks man awesome vids!
Where did you get the fuel pump ??
Boo LuQuette Amazon
Thanks 530 when you get time can you send me a part number or a link for that pump ?? TIA Mon Ami ~!~!
Hey Brandon. Can you tell me what the part number is or where you get your mil-spec fuel line? Would like to get some for my shop. Thank you.
I got it from McMaster, Ill look at the part number when I get to a computer.
Hey man. Is there any way you can swap carbs for this? Mine has a little trouble getting my boat up on plane which causes it to hang like it running it at about half throttle
Sure its running on both cylinders?
You can swap carbs with another 9.5, but that is the only carb that will fit this thing.
😩 ok. That won’t fix this issue lol. Thank you for the insight though. Was hoping to be able to move t up to a 15.
I just got this motor what kit would you suggest
This is what I used: OMC 382048
I have a 1970 9.5 Johnson with bad fuel pump. The square one is 120.00, will the other stile like yours fit mine and if so what part # are they, do you know??
It will, but that's the original style, you really don't want to use one if you don't have to.
Have you considered an aftermarket pump? bit.ly/0388833
Yes I have but trying to find one that I can afford....120.00 is outrageous.
Did you look at the link I sent you?
I did...THANK YOU.