Cast Infinity puzzle by Hanayama. Solution and unboxing.
Vložit
- čas přidán 27. 05. 2024
- Cast Infinity puzzle by Hanayama. In this video i will show you solution of infinity puzzle.
If you want to buy Infinity puzzle by Hanayama and support my channel, use these links:
North America
www.puzzlemaster.ca/browse/wi...
amzn.to/2ulzfLJ
EU
www.knobelbox.com/geduldsspie...
www.logicagiochi.com/en/prodo...
UK
cruxpuzzles.co.uk/product/cas...
Download free solution for Infinity puzzle www.puzzlemaster.ca/solutions...
Other puzzle stores you may like: www.siammandalay.com/puzzleguy
Please subscribe goo.gl/k4jHYm to my channel so you do not miss anything.
I would have never been able to do this without the video, I only got about 1/4 of the way through on my own. It was even hard with the video lol
Infinity puzzle takes a lot of steps to solve it and it is pretty easy to become confused in the middle and start moving wrong direction.
Thank u soo much i could not put mine back together
THANK!!!!
I managed to take it apart, but I'm having trouble reassembling it. 😢
how long did it take you to solve it originally? i took like an hour lol.
when i finish reassembling the puzze, my "left"/ non hanayama piece falls down instead of staying flush with the ring itself. Do you know why?
Don't worry, It was designed like that. Mine falls down as well.
@@Puzzleguy ah thank you for the clarification. It looked like yours didnt fall down and that is why I asked. I appreciate the quick reply!
Let me remind you that you are holding back the pushing and releasing of the other circled while you spinning the other circled with the infinite engraving....just saying...
hello. i am a blind person. i simply cant assemble it. when i put in the pieces, one is positioned higher, than the other. how do i the proper starting assemble position. can you write the directions, where to turn the pieces, or the pattern? thanks.
It's been a while since i solved this puzzle. Give me few hours. I'll try to write you directions. Do you need the whole solution, or just a hint, how to start?
hello. i would like the whole reassembly. so i know how the pattern work. and where to turn what. i managed to dissasembly it, but honestly dont know how i did. and suddenly it felt apart.
First you have to locate cylinder which has a sign on one of its flat sides. I'll refer to it as Infinity cylinder. Put it in front of you to the right with the sign up and the cut out down.
Second cylinder put with the cutout up in front of you and to the left
Now grab the 8 shaped part and find two lips inside. One lip is wider, an other is thinner. Put it in front of you with wider lip to the right, and make sure it is at top.
Now grab the Infinity cylinder. Align its cutout and the lip of the right inside of the 8 shaped part and put it inside. Put index finger inside the cylinder and start rotating it clockwise. After small move cylinder will stuck, pull it up and move clockwise again, until it stops, push it down, move clockwise. Pull it up again and move clockwise, push down and move clockwise. Now you can feel that the cutout of the cylinder is aligned in the middle ща 8 shaped part.
Grab second cylinder. Put it inside in the 8 shaped part from the bottom. Align cut out and the lip. As soon as the cutout passes the lip, turn cylinder clockwise. Cylinder will go up a bit.
Starting from this point you have to hold Infinity cylinder in right hand, second cylinder in left hand.
Rotate Infinity cylinder counterclockwise 5 steps. If you can't make next step, move second cylinder up or down to let the infinity cylinder move further.
As soon as you made 5 steps, rotate left cylinder clockwise 1 step. to do so, adjust vertical position of infinity cylinder.
Now you have to make 5 clockwise steps with Infinity cylinder. Adjust position of left cylinder, if you cant make next move.
After 5 moves, rotate left cylinder clockwise 1 step. to do so, adjust vertical position of infinity cylinder.
Rotate Infinity cylinder counterclockwise 5 steps. If you can't make next step, move second cylinder up or down to let the infinity cylinder move further.
As soon as you made 5 steps, rotate left cylinder clockwise 1 step. to do so, adjust vertical position of infinity cylinder.
Not you are at the last stage. Make 5 clockwise steps with Infinity cylinder. Adjust position of left cylinder, if you cant make next move.
Rotate left cylinder clockwise 1 step.
Congratulations! Puzzle is assembled.
I hope i didn't make it more complicated than it actually is.
hello! thanks for the brilliant description. i managed to position the disks. i just have to precisely do the turns. what do you mean by "steps"? complete turns, or to the "steps" you count the bumps when it passes over the lips too?
By steps i mean small rotation of cylinder until it stops and you have to move it up, or down to make an other step. Every time you rotate Infinity cylinder, you have to make 5 steps clockwise, or counterclockwise.
Who else bought this for $10
Help me pls!