I fixed the Predator swapped ATV!!! It RIPS!!!!

[@yvngfry3580]

I just started this project! I am going to try to use yours as a reference. Awesome video!

[@davidpayne4084]

Carroll Shelby once said you can never have enough horsepower but traction that's a whole another story

[@GriddleMeThis]

My kids ATV is basically the same ATV. The 110 motor blew
Last week and I did the same swap but kept the stock sprocket on the rear. I made a spacer so the drive pulley on the torque converter won't fully engage so my kids don't get hurt and limited it 35 mph ... They love it

[@timsolomon8352]

Did you have to drill the carb like he did? I feel like it was something else and that didn't need to be done?

[@GriddleMeThis]

@@timsolomon8352 I didn’t do anything to the 212 engine but bypass the governor.

[@mxfool1508]

You did an awesome job with the quad the big kids and the little kids are going to have some fun

[@hectorjauregui3404]

Well done Weld the muffler on the end on the pipe is going work better.sound better

[@juanbotello7940]

Wish you were in Wisconsin I would pay you to get this done lol

[@teammouse]

You deserve more views!

[@boatdoctors]

Nice job. I have several 212 projects as well very fun

[@timsolomon8352]

Is it possible, since it's gravity fed? No fuel pump I imagine, that drilling the jet wasn't necessary? The fuel line curling like it was would cause issues... also removing the throttle screw probably played a big part.

[@DIYD_Do_It_Yourself_Dad]

Drilling the jet isn’t necessary but it does give it more power.

[@jessicac168]

What size chain and rear sprocket ?
I’m in the middle of doing this ? Got the torque converter the chain that was on my atv was a 428?
If you have a link for the chain and sprocket that would be great. And I’m guessing 5ft right?
Thanks

[@williambrown6916]

What do you get the rear sprocket from

[@therealilxaiden]

Put a 17 tooth clutch on it.

[@austinsheaffer4771]

Don't think you did, but did you bypass the gov? If you do, you can prob get an extra 10mph+

[@austinsheaffer4771]

Nvm you just said it in your video 😂

[@Ghost88890REAL]

Hey! I am starting to do something similar to yours, so how did you do your build? I was planning to make mine a chain driven sprocket gearing, but what's the difference if I put clutch/torque converter/etc? I'm new to this.

[@DIYD_Do_It_Yourself_Dad]

I don’t think a clutch is strong enough that’s why I went with the torque converter. It worked very well. I think the clutches are rated by tire size and the tires on my atv were way bigger than what a clutch was rated for.

[@williambrown6916]

And also where you get the torque converter from

[@DIYD_Do_It_Yourself_Dad]

Got everything from ebay

[@deanmayoral8688]

Is that drillbit. What size is it. The smallest I can find is 1/16

[@DIYD_Do_It_Yourself_Dad]

It’s a 60 gauge. You have to buy the whole set at harbor freight to get that bit.

[@DIYD_Do_It_Yourself_Dad]

Warrior brand part #63764

[@rmoran9999]

I did one for my son it's a Kawasaki 110 Mojave I put a new carburetor mikuni

[@MrRyancangri]

Awesome wow!!!!!!

[@kraftcraft2934]

Pretty cool

[@pedromaguellal6662]

So how do you do a govern delete for the speed

[@diy5starautoinfo580]

What type of welder did you use?

[@DIYD_Do_It_Yourself_Dad]

The cheapest one I could buy at harbor freight 🤣

[@diy5starautoinfo580]

@@DIYD_Do_It_Yourself_Dad like is it a flux,mig or tig 😂😂😂

[@diy5starautoinfo580]

@@DIYD_Do_It_Yourself_Dad I have the four-wheeler frame I have the engine I just need to know what type of welder to use to get it done

[@DIYD_Do_It_Yourself_Dad]

@@diy5starautoinfo580 it’s a flux core

[@paulgardner587]

I have wanted to do this found one for $100 on market place. I was worried about torque , stop to pulling power, hill climbing? It’s pulling a grown man I imagine a 60-75 lb kid it would be ok

[@DIYD_Do_It_Yourself_Dad]

It depends on your gearing

[@liamryler1798]

Km or mph

[@DIYD_Do_It_Yourself_Dad]

Mph