Beautiful builds, loving the work you guys do! I have a question on the gas tank since I wanna do the same to my FXBB. When you switched to the 5gal Lowrider tank does the ECM auto-adjust for your fuel capacity and miles to empty, or does it stay based on stock tank size/cpacity?
So from my understanding I can’t just take the low rider s mags a put them on my street bob without switching out the sub frame?and the front tire does it need anything to bolt it on ? Or is it mainly the back tire and is it even worth all that money wise just to put those mags on I’m having a really hard time finding mags
Can you go into detail on how you got the gauges to work on the tank. I have a street bob but want the bigger tank was in sure how I’d make the dash Work!!!
You just plug it in and then take it to Harley and have them re-flashed the ECM for whatever speedo you were using. Or you can watch our other videos and see how we did it
I have a 2022 Street Bob, I would like to upgrade it to a larger gas tank like a 5 gallon. Would a Low Rider S Gast tank work since its also a softtail build? I need help. What tank do I need to order through HD in order to get a 5 gallon tank on my bike??
Yes, it will bolt up but you could either have a custom seat made or have to do the whole Lowrider back half as well. I don’t think that Seat would match up with a tank but you could give it a try.
@@kruesioriginals I have heard that the new lowrider wheels will fit on some of the older dynas. I have an 04 T sport I need to wheels for and a 16 street bob I wanna replace out the spokes. Plus I don't really wanna pay damn near 2gs for a set on dyna/FXR trader. Any tips for me on this?
They are the exact same bike. They just have a different tank and fender. If you bought the rear fender section and this tank up, everything will work great with the seat.
I’m in the process of putting a 5 gallon m8 tank on my Street Bob (fxbb). Does anybody know how to get the digital gas gauge working with the new tank and fuel pump?
@@Big-Daddy96 I haven’t quite got my bike back together yet. I’m using a 2022 Softail Slim tank, and I’m getting the fuel pump and sending unit for one of those. I hear conflicting things. I hear that the new sending unit should work with the new float, to it has to be reflashed, to the fuel gauge on the Street Bob (FXBB) will never work with it. Pyrotec in Alton Illinois is in the process of painting it, then they will button it up. I’d really like for the fuel gauge that’s in the FXBB bar clamp to work with the 5 gallon tank. This has been done by quite a few people, so their has to be done answers somewhere. We’d appreciate the help for sure. 👍🏻👍🏻
@@justfine77777 I've been looking high and low for into on the 22 low rider s fuel tank, it's 5 gallons and there's no gauges in it because they moved to the dash for that year model
@@kruesioriginals well fuck me lol, I wish I would have seen it before I spent the Money on a custom dynamics one tbat does t even sit flat. But fuck it, I’m still going to get one because that looks way better.
"Less than affordable price" great line! Good work ain't cheap!
Amen 🤘🏼🤘🏼😎
That bike turned out legit!
The Low Bob is one of the nicest looking Softies I've seen by far. I can't wait to see the Street Rider when it's done!
😎 the StreetRider is goin hard with some new shit.
Great build
Beautiful bike! Awesome build! Strong work.
Another great bike! Really enjoy the direction you take these bikes. Strong work.
Thank you so Much 🙏🙏
Absolutely knocked it outta the park. I love it. Wish I could add it to the garrage! Great job!
Great build !!!
Good job fellas looks great
Really dig it!! The whole color combo, it came out sick!! Keep the pimp shit rollin guys!!
I am inspired to do the lowbob now.
That paint reminds me of the white paint on my 2019 iron 1200. This bike is legit!
That looks rad man!!
Congrats Brandon!
Came here after seeing you guys on Jon's joint. Good shit. Merry Christmas from Hotlanta.🏍️💪💥
Cool looking bike. I came over from Jon's Moto Garage.
Yes!! Jon is awesome
Looks great. I don't hate my Lowrider / Nighttrain as much after seeing the potential.
I still want my Dyna back though...
@@rb2112 I think they could’ve made a mono shocked FXR, which could’ve been very cool. They need to bring back Eric Buell and let him work his magic.
Your shittin on almost every bike on the rode with these sweet builds
I miss the stache..
That's badass
Awesome bike
Love it
Its so nice
That bih is dope
Clean AF
Hell yeah brother
Beautiful builds, loving the work you guys do! I have a question on the gas tank since I wanna do the same to my FXBB. When you switched to the 5gal Lowrider tank does the ECM auto-adjust for your fuel capacity and miles to empty, or does it stay based on stock tank size/cpacity?
It just goes off of the float for the fuel fuel level still gonna be quarter of a tank have a tank stuff like that.
@@kruesioriginals thanks man! Hope you guys are doing well and had a good time in Dallas for the FastLife episode!
Tuck n roll is the way
Dope
looks bad ass,
I dig it.
Bad ass build, im curious is that just a normal fxbb saddlemen seat? or a different FXBB saddlemen seat to fit with the tank conversion?
We just switch seats you have to run to Lowrider with the Lowrider stuff and Street Bob Street bob stuff
So from my understanding I can’t just take the low rider s mags a put them on my street bob without switching out the sub frame?and the front tire does it need anything to bolt it on ? Or is it mainly the back tire and is it even worth all that money wise just to put those mags on I’m having a really hard time finding mags
Does look awesome! Needs a duel shock setup! #whitebikesmatter we’re a small minority lol
NAILED it again
Can you go into detail on how you got the gauges to work on the tank. I have a street bob but want the bigger tank was in sure how I’d make the dash Work!!!
You just plug it in and then take it to Harley and have them re-flashed the ECM for whatever speedo you were using. Or you can watch our other videos and see how we did it
Hey guys beautiful bike, why did it take to fit the low rider wheels
On the streetbob ?
They bolt up
Did you guys need to change the connectors for the Speedo? Or was it plug and ECM flash?
It was so long ago I don’t really remember, but I think it just plugged right in. It’s the same stuff.
You guys did good . You guys wired the speedo to the bike was there any issues doing it ?
We had to have Harley re flash the ecm for it and the tail light
Does the front “custom” spacer go on the axle or to space out the brake rotor..?
You have to do both
I have a 2022 Street Bob, I would like to upgrade it to a larger gas tank like a 5 gallon. Would a Low Rider S Gast tank work since its also a softtail build? I need help. What tank do I need to order through HD in order to get a 5 gallon tank on my bike??
Yes, it will bolt up but you could either have a custom seat made or have to do the whole Lowrider back half as well. I don’t think that Seat would match up with a tank but you could give it a try.
What sort of hassle was it to get the tank to fit
Did you use a special kit for the mag wheel conversion. Or you just used a spacer? Did u go with a 170 tire or 180 in rear
We make all the spacers in house. This bike has a 180 on the rear of it
@@kruesioriginals how much for your mag conversion kit for an FXBB?
@@adminadmin9997 We don’t have a kit for sale we make each one individually for each bike.
@@kruesioriginals I have heard that the new lowrider wheels will fit on some of the older dynas. I have an 04 T sport I need to wheels for and a 16 street bob I wanna replace out the spokes. Plus I don't really wanna pay damn near 2gs for a set on dyna/FXR trader. Any tips for me on this?
@@ChiefQ83 Sorry my dude they’re just expensive right now. And the Lowrider wheel is way too wide for that early Dyna
Did you have to change fender struts with the gaurd?
Yes
Is it possible to use a 2in 2 slip on muffler and the bung king passenger peg? I cant seem to get the pegs on with the mufflers
I have no idea dude. Get rid of those slip on’s and get a real exhaust it’ll remedy the problem
How much of it was a straight swap (no modification l, just unbolt from one, bolt it on the other)?
The whole thing
Did the gas tank swap work without issues? I can get a lowrider s tank. I want it for my street Bob…. Please advise
Bolts up. Same bike
may i ask if the kow rider tank is a direct fit to the street bob?
They are the exact same bike. They just have a different tank and fender. If you bought the rear fender section and this tank up, everything will work great with the seat.
How did you guys get the lowrider wheels to fit that street bob front end? I currently have fxlrs wheels I am trying to throw on my 2018 fxbb.
Lowrider S wheels are completely different than a lowrider wheel. The lowrider S wheels will never work. They are wide glide wheels.
@@kruesioriginals I was thinking that as well. Wanted to double check if it was a lowrider or a lowrider s you guys swapped parts with. Thank you.
The wheels should be black! but it looks good.
Whose pipe ? Bike is badass.
You've done a really nice job but i personally LOVE the look of the stock Fat bob and wouldn't change it.
So… you were able to swap the tank? I want to get the tank…. I found one …I didn’t know they would fit
I’m in the process of putting a 5 gallon m8 tank on my Street Bob (fxbb). Does anybody know how to get the digital gas gauge working with the new tank and fuel pump?
Any luck? I'm in the same boat
@@Big-Daddy96 I haven’t quite got my bike back together yet. I’m using a 2022 Softail Slim tank, and I’m getting the fuel pump and sending unit for one of those. I hear conflicting things. I hear that the new sending unit should work with the new float, to it has to be reflashed, to the fuel gauge on the Street Bob (FXBB) will never work with it. Pyrotec in Alton Illinois is in the process of painting it, then they will button it up. I’d really like for the fuel gauge that’s in the FXBB bar clamp to work with the 5 gallon tank. This has been done by quite a few people, so their has to be done answers somewhere. We’d appreciate the help for sure. 👍🏻👍🏻
@@justfine77777 I've been looking high and low for into on the 22 low rider s fuel tank, it's 5 gallons and there's no gauges in it because they moved to the dash for that year model
Crash bar and light bar?
No stealth pipe?
What size tire you running on the front 110? Or 100mm
100, never 110 to wide makes for wobbles
Hey what kind of exhaust is on that Low bob?
2. Brothers
What brand grips are those?
Renthal
Can you also swap the low rider wheels on to the street bob with no other modifications?
Do you have to change the rear subframe and fender the street Bob is too narrow
(You have)
@@kruesioriginals thanks for the information, i did not know that. I like your work and video's, always looking forward for the next.
@@mitchellklip8566 Hell yeah man thanks for watching
I am subscribed to learn about the pimp shit going on.
😎 FNA
Yeah, she does look damn pretty. But I'd still have my dyna over any softail
I’m not a fan of the color.. but I think the tank and seat otherwise
What license plate mount is that?
It’s ours there on our website
@@kruesioriginals well fuck me lol, I wish I would have seen it before I spent the Money on a custom dynamics one tbat does t even sit flat. But fuck it, I’m still going to get one because that looks way better.
@@LaneSplittin Well thank you my man I’m glad you like ours. The custom dynamics a real nice too though we run them on a lot of bikes
@@kruesioriginals yeah but the completely flat one looks more clean in my opinion. I looked for one but nothing popped up on google.
@@LaneSplittin www.kruesioriginals.com/products/lay-down-license-plate-mount?_pos=6&_sid=4f5073e1c&_ss=r
Looks like a rice burner in the back.