That's one thing when you take pride and do awesome work, you have customers for life! I been a master ASE diesel tech and engine builder for caterpillar for 14 years, same customers over 10 years. If you don't take pride in your work then why do it and waste people time and money. Guys keep up with the awesome work!!💪🏻💪🏻🤘🤘
You guys work in heaven every day.... 20 years from now our kids will be drooling over the cars you have had in that garage....its mind blowing and nut blowing satisfaction...lmfao.. So awesome
I was literally talking to my brother the other day that i'd like to see updates on the channel. Have customers send in street and track videos with their results.
I'm so sick of turbos I think I'm gonna look at s/c'ers for a LS and forge the internals a little and put a streetable race cam in it for high speed and lower rear-end gears like 3.42 or 3.23
You realize that’s from the recap video of the caprice that we did a year ago not currently in the shop. You’ll have to go back and watch videos around when that came out.
Now could you do a dyno pull with The aircon on and every thing that uses electric on the car turned on? So we could see The massive Power loss that it makes?🤔
@@carguy... says the guy with what looks like a stock ass car..you don't seem to be too bright either. There's so many videos of stock Z06 Vettes on CZcams. This dyno doesn't read "higher" than almost any other ones. Yes, it's a tool, but Dynojet makes thousands of these, and the chances of just one reading significantly higher is slim. Do you ever take into account of DA, altitude, rotating mass of wheels and brake rotors, and other variables? Don't say stupid shit bud
I have a cammed C5 Z06, with an intake, kooks headers and x-pipe. If my plan is to go pro charger down the line, would you guys still recommend me to port the heads and get a fast intake manifold and throttle body? I am somewhat new to this. I would really appreciate your advise! Great video!
rotor13 I guess I’m trying to figure out if it’s worth it to get ported heads and intake manifold and throttle body. Understanding how pricy it is to go pro charger.
@@IsThatGeneral yea you wish those can't even make 500 wheel with cam long tubes tune intake and heads they majority top out at 460 wheel oh and let's not forget that most dodge guys don't even do those mods I said just a muffler delete and a handheld tune and the 5 speed robs immense power you really just tried me bro and if you haven't noticed the SRT Chrysler in my profile pic so please take heed in what I said (🥴💀)
That C6Z is probably a favorite build. Simple. Reliable. Fun.
@@Debkghtulvkfjkjfxjjcj it did? Did I miss something in the video?
@@Debkghtulvkfjkjfxjjcj nothing a little gorilla glue can’t fix 😂
That's one thing when you take pride and do awesome work, you have customers for life! I been a master ASE diesel tech and engine builder for caterpillar for 14 years, same customers over 10 years. If you don't take pride in your work then why do it and waste people time and money. Guys keep up with the awesome work!!💪🏻💪🏻🤘🤘
You guys work in heaven every day....
20 years from now our kids will be drooling over the cars you have had in that garage....its mind blowing and nut blowing satisfaction...lmfao..
So awesome
Nice to see A&A c6Z still running strong!
2:12 dyno pull with spot light on 😂🤘🏻
I was literally talking to my brother the other day that i'd like to see updates on the channel. Have customers send in street and track videos with their results.
Follow the customer instgram pages for that
Andy's supercharger kits from A&A Corvettes are awesome, fucking love those guys over there
Eric "Steve you love when we pull it out" I thought he was more of a put it in type.
Great video guys. Nice to have some fun at work.
That Cadillac CTS-V was super loud. Steve making epic car intros. Make you want to revisit past episodes. That yellow C6 Z06 is a nasty monster.
The update on the Caprice was nice. I have one and we have surprised a few people thinking it was a v6 impala.
Ppl are really dumb and dont no cars whoever thought that
Love me some Gone in 60 seconds.... I love it when u change ur voice and spaz out and imitate people funniest shit EVER!!😂😂😂😂😂
The only thing that needs to be built on more than these impressive cars are the attitudes of the builders..
Steve you like the weird Ol dude that films porn
..... tryin to get the perfect shot of the “cam install” 😂 Sicko 😂😂
Hahaha
He's getting the shots from the front and the back. 😂
Waiting for "The Money Shot"....
Waiting for "The Money Shot"
I could watch this channel all day
Very good episode. I laughed alot during this one. Insane builds as usual.
Fran’s performance IQ unlimited 👍
Yellow z was/is a fantastic build👍
Like your shop's name Race PROVEN Motorsports. Idk where else is a toughter proving ground for a car y'all built, besides the streets.
I'm so glad to see I tighten tires the same as Mr. angry eric. No need for a torque wrench, tight is tight.
We use a trq wrench on every wheel we install. Just after he snugs then with the gun
🤣 5 uga-dugas is plenty
That cam shot oh baby 😂🤣😂.god there is some beautiful cars in that shop yellow vette for one ...all of them ..
Great video! Love seeing the updates
That caddy dam son the paint is banging oh man oh man 😍😍😍😍😍😎😎 freaking cars r sweet
Oh that C6Z is really gonna gap some GT500's now 👀 Chris's car is gnarly and he doesn't just baby it!
I think he sold it
Kmaark according to his Instagram a few hours ago where he posted about this video, he still owns it
Camaro's heads are friggin gorgeous!
Thanks for the video baby!!!
What fuel system is on the yellow Z06?
I like the view inside the car
I'm so sick of turbos I think I'm gonna look at s/c'ers for a LS and forge the internals a little and put a streetable race cam in it for high speed and lower rear-end gears like 3.42 or 3.23
The inside clip = great
Can you get clips of pulls with the door open from further away?
I love it my guys rpm keep up the work and love video and I love Camero z28 and CTS-V 💯💯💯💯💯
Bruh that yellow Z06🤤
Always great videos......👍🤟
Please do a video on the gorgeous blue GTO please!
What GTO?
@@RaceProvenMotorsports 2:13 minute mark
2:13 minute mark
You realize that’s from the recap video of the caprice that we did a year ago not currently in the shop. You’ll have to go back and watch videos around when that came out.
@@RaceProvenMotorsports
Lol. I'm a dumb ass. Lol.
I feel like I see more A&A cars lately vs a lot of prochargers in the past. Are those customer choices or you guys preferring AA?
What are a and a cars?
@@saferpocket26 AA supercharger
Thanks
You guys see a lot of cars... what would you say is the safe stock bottom end limit on the ls3?
What’s the rear wheel set up and specs?
nice video quality on this one
Now could you do a dyno pull with The aircon on and every thing that uses electric on the car turned on? So we could see The massive Power loss that it makes?🤔
We did a video about it, doesn’t do anything the compressor is turned off during WOT
What under hood work light do you guys use?
Do you know if this is CA Legal?
Aftermarket interior?
The spoiler on the yellow Z, is it the extended version from c7 carbon?
Bruce McLean yes it is 👍🏻
My boysssssss 💯💯💯 love john force guy he wild. Yellow car for sale???
Love RPM, boostedc6, Dom, and Nardi. Chevy gang Ford gang 💪💪💪💪💪
BoostedC6 😂😂😂😂😂
BoostedC6 heard you were buying it
BoostedVette I have enough toys lol
@@cnardi91 Didn't you just break a valve spring?
What did he spend
The Grandsport made good power for being virtually stock. My 2009 base made 404/400 with a CAI, headers, x-pipe, and tune. 😥
It's just their dyno it reads higher than most but remember it's just a tool.
Haha. People say ours reads higher until they put their own car on it
@@RaceProvenMotorsports Lol truthfully it's just a tool but your tool doesn't read on the low side which I'm sure is good for business 😉😉
K
@@carguy... says the guy with what looks like a stock ass car..you don't seem to be too bright either. There's so many videos of stock Z06 Vettes on CZcams. This dyno doesn't read "higher" than almost any other ones. Yes, it's a tool, but Dynojet makes thousands of these, and the chances of just one reading significantly higher is slim. Do you ever take into account of DA, altitude, rotating mass of wheels and brake rotors, and other variables? Don't say stupid shit bud
"Losing power with The light on" , just saying. And what is even worse is Steve on the back, i wonder how much hp did you lose there.😂
I have a cammed C5 Z06, with an intake, kooks headers and x-pipe. If my plan is to go pro charger down the line, would you guys still recommend me to port the heads and get a fast intake manifold and throttle body? I am somewhat new to this. I would really appreciate your advise! Great video!
dbdrive12 You can get the kit and just add the intake manifold and throttle body and get a retune at a later time.
rotor13 which kit are you referring to? What does it include? Thanks for the reply
rotor13 I guess I’m trying to figure out if it’s worth it to get ported heads and intake manifold and throttle body. Understanding how pricy it is to go pro charger.
dbdrive12 or just go turbo and buy everything you need for the price of a Procharger
@@detigressoy If you want more power, of course.
General Zoan
How are you going to procharge the new C8? the people want to know
When Procharger comes out with a kit for one and tuning is available we'll be sure to show it. But that's a long ways away.
Meth controller in the engine bay, kind of stupid don’t you think?
Have you ever seen a car before in your life
What is it you guys call the LT1 cam?
Danny Carwile lol the Taint Tickler
What heads are on the Yellow Z?
Same as we use on all of our LS7 heads cam setups our RPM spec’d factory heads done by A.I.
What’s the pricing for labor and tuning. Need you guys to work on my Dodge Charger
Nothing can be done with that old ass 5 speed
Mr. TAMW I’ll burn any car you have in this old ass 5 speed 🥴💀
We don’t work on dodges
@@IsThatGeneral yea you wish those can't even make 500 wheel with cam long tubes tune intake and heads they majority top out at 460 wheel oh and let's not forget that most dodge guys don't even do those mods I said just a muffler delete and a handheld tune and the 5 speed robs immense power you really just tried me bro and if you haven't noticed the SRT Chrysler in my profile pic so please take heed in what I said (🥴💀)
Mr. TAMW 5.7 giving out gap sauce. What flavor do you want my boy?
I feel like when people order Corsa exhaust, they dont realize there are three sound levels, Extreme, Sport and Touring 🤣
Greygoose c5 for the C6Z there’s only one option and that’s sport.
Pretty sure there are countless videos of c6z corsa extreme. Unless they no longer make that
Wesley Beeson nope no such thing. They only come sport with either quad or duel tip, round or oval.
I think Sport is the best option no matter the car, thats just me though.
What would it cost me for yall to build my t56?
We don’t build transmissions
That’s funny, I thought you all had a side company name rpm transmission lol
@@albertgarcia7091 well don't I feel like a retard lol...i really thought this was the guys from rpm transmissions, guess not
Tech work’n on that black C7’s a weird dude..... mister personality
By
Oh
Just broke😭
Timestamps!!
I have a A&A super charger
Lmao Steve trying to imitate how people sound in the comment section is literally how HE would sound in the comment section.....
Casino 88 ok boomer
Better than porn
Nah close tho🤣
you wanna hear cam bearings getting SMASHED? watch old reruns of Engine Power/ Horsepower TV. Literally nothing wrong with what they're doing here.
Who cares Dyno results those machines are bullshit anyway I took my ZO6 to three different dynos and got totally three different results.
What wheels and tires are on the yellow C6?