Brand New! Can-Am 60" Promount Plow on 2021 Outlander 850 XMR
Vložit
- čas přidán 18. 02. 2021
- Picking up my new 60" Can-Am Promount Plow for my 2021 Outlander 850 Xmr. I had the dealer install the plow along with the Can-Am drift cutters, plow markers, and also hand and thumb warmers. Check out the video for a overview of the plow and to see the snow plow in action!
I am a Amazon affiliate member and if you purchase the kit by clicking on my link I may receive a small commission which helps to support this channel.
Can-Am Promount push frame for plow for Outlander Part# 715004339: amzn.to/2ZxIqZv
Can-Am ProMount Mounting Plate for Outlander atv Part# 715006360: amzn.to/3ayrKHG
Can-Am ProMount 60" Plow blade for Outlander Can-Am official part#715005201 I can't find a link to it on Amazon so the one below might work but im not 100% sure so double check for your year make model atv.
Can-Am New OEM ProMount Steel 60" (152 cm) Blade Outlander Part# 715004202: amzn.to/2NbbtQ7
Can-Am ProMount Drift Cutters Part # 715006258 amzn.to/3jS6GAl
Can-Am Heated Grips & Thumb Warmer Part# 715004815: amzn.to/2ZIreAJ
Can-Am Wired Remote Control for WARN Winches Part# 715006378: amzn.to/3aAj9Eq
DynoJet Power Vision 3 for 2019-21 CAN AM OUTLANDER PV3-25-10 amzn.to/3p1UFb7
Can-Am New OEM ATV Outlander Heated Hand Grips & Throttle Combo, Part# 715003250 amzn.to/2MHja0b
Can Am Outlander XMR Snorkel Kit Part# 715002518: amzn.to/2Zuu3F9
Can-Am Gauge Support Part# 705013984 google it and you can buy from Partzilla or elsewhere.
Fahren H11 Low beam Led bulbs: amzn.to/2NZCwO5
Fahren H10 High beam Led bulbs: amzn.to/36HpzyZ
BeamTech H11 Low Beam Led bulb: amzn.to/36GU2x5
Beamtech H10 High beam Led bulb: amzn.to/3tsNqfx
Can Am Mud Strap: amzn.to/36C2Bt
My CZcams PC channel: / pcaddict365
My CZcams Off Roading Channel: / temptation2003
"Life of Temptation2003" CZcams Vlog and much more Channel: / @lifeoftemptation_offroad
Facebook Page for "Temptation2003 & Life of Temptation2003": / temptation2003
Facebook Page for PCaddict365: / pcaddict365 - Auta a dopravní prostředky
Very nice. I just got the 2021 XMR 650 about 2 weeks ago. That plow did push well. Nice roll as it was pushing too. Thanks for the upload.! 👌
That's one of the slickest plow setups I've seen. Love it.
Thank you! It seems to work great so far. I will post up another video once we get a nice dump of snow.
@@Temptation_Offroad I have been having issues locating this. I've spent the past few hours on the phone and no one can get anything lol. There's a shortage of everything in the world today. Except taxes 😂🌍
@@IMiss_The90s Yeah, i bought mine right from the dealer along with the ATV. Gave them a list of accessories I wanted and once they all arrived I went down and picked it all up. Sadly they sent me home with a super heavy plow for a side by side originally! Didn't find out until we went to install it ourself🤣😂🤣 Then had to wait to ship back that one and get the correct one🤦🏽♂️. A ton of wasted time and effort by their simple mistake because i live almost 3hrs from the closest dealer. I can look later today and try to find any online for ya when i get a chance. Awesome plows though and yeah unfortunately thats the world our governments are creating.
@@Temptation_Offroad I'm in Canada. I am also 3 hours from the dealer I ordered mine through. 6 hour round trips suck lol. I can't even get the parts on the can am Canada website. Some but not all. I'm also going to get the hand warmers, mud flaps and tuner that you have eventually. I think I'm going to go with the Yoshimura exhaust. But for now. I'm trying to line up the plow as my bike is set to arrive in January so the most important accessory will be the plow to start off lol.
😊@@Temptation_Offroad
I have a similar set up on my Can am 650 XT. I use chains on the rear tires and it helps.
At least you were still there when you seen the wrong controller bud
Dam she’s definitely a nice ride 🤘
Canams life baby
Hell yeah! I love this CanAm, its a beast of a machine!
Sweet plow, sweet quad Canams rule an Polaris drool hahahah 🤘
Great video nice plow
Thanks!
You’re welcome! 😁
Very nice
Thanks!
I’m considering on buying this exact set up. But maybe the 72’ inch blade. Would you go any bigger on the blade?
It depends on how big of area you are plowing along with other factors. If you get too wide of blade it can spin your atv sideways easier if you are plowing the edge of a snow bank. As for straight line plowing this atv could easily push a 72" plow. I just like the 60" one being a tad wider than my atv and not sticking out too far especially when i angle the blade. I would look at other videos and try to see how people like the bigger blade or ask on a Can Am group on Facebook also for more info.
Nice video! Are you sure you can’t leave the winch line in the little black eyelet for plowing? My dealer never told me that’s only used for connecting it.
Thanks! As far as i know its only used for connecting it when hooking up.
Is there some sort of a sheer pin system, to prevent damage to the frame and mounts if you hit something solid with the plow?
Nope
I hit something hard just the other day plowing and it actually disconnected from the quickmount pins and dropped down. All i had to do was hook it up again amd off i went.
Awesome, I won’t one.
Do you lose any ground clearance? Can you take the mount off before riding?
You don't lose hardly any ground clearance at all with this setup so there is no need to remove it at all to go mudding etc. I leave it on year round and have had zero issues when riding. Its a great setup and works excellent for plowing snow. I will do another video of it this winter to update everyone.
What did it cost for everything how much was it to get put on as well
$1500 CAD all in
Did you get the limit switch put on for this setup?
No but that would be really nice to have! I will look into it and make a video once i get one.
How is it holding up?
What's better steel blade or the plastic ones ??
The composite blade won't rust. Either one should be fine.
Do u plow in low and what mode?
Yes always plow in low range, i use sport mode but im sure normal mode would work fine as well.
That look nice
Does the plow angle?
Yes 2 angles for each side. So straight, slight angle, steep angle.
Do you have a link to the "drift blocker", I think you called them.. I'll order from your links..
I put the link to them in the video description now. They are called Can-Am ProMount Drift Cutters. amzn.to/3jS6GAl
I don't understand why you'd need the remote for this setup?
You don't, I bought the remote for when im out mudding just in case.
@@Temptation_Offroad Ahh ok, that makes more sense lol I want this plow setup on my 21 X mr I'm taking delivery of next week but I wasn't sure which one to get. We don't get the same amount of snow you guys get but this seems super easy to use
@@GarrettHamilton It is really easy to use and works excellent! You will be very happy with it
No down pressure. That should be an issue...
It has plenty of down pressure for plowing. I actually have to use the winch to raise it when making tall snow banks otherwise it will just plow straight into them.
You realize truck plows have no down pressure either
Cómo estás ni hermano
Creo que te refieres a mi hermano * jajaja😂🤣 Todos bien aqui gracias. Cómo estás? Bendiciones para ti y tu familia.🙏🏻🤝🏻