How to Install Aftermarket Double Din Radio & Backup Camera in 2010-2015 Toyota Prius
Vložit
- čas přidán 5. 07. 2023
- 9” Android Tablet & Backup Camera installed in 2013 Toyota Prius.
Parts used:
•Wiring Harness: Metra 70-1761
amzn.to/3RFfKIG
•Antenna Adapter: Metra 40LX11
amzn.to/48y8WmW
•Radio: Hikity 9” Toyota Prius Plug N’ Play Head Unit
amzn.to/3ts26Rf - Auta a dopravní prostředky
Great video, wonderfully done and very helpful. Just one question. How did you get the steering wheel control button to work? Thank you !
I used the Metra ASWC-1. Here is the link to the instructions
metra-static.s3.amazonaws.com/swc/ASWC-1_INST_604.pdf
Great job. I have the same unit, but touchscreen is bad. Did you loose any functionality found in SETUP and CAR buttons? Does it shows car info and let you manage bluetooth/phones? Thanks!
What functions are you referring to? It doesn’t show any car info because it didn’t have a canbus decoder. You can manage Bluetooth through the BT app.
I dont ha e steering fucntionality .. i tried relearning still no success... how did you get your steering wheel working? Tnx in advance
@LutongPinoyFastbreak there is a 28 pin harness you need to tap into. Pin 23 needs to be grounded , Pin 22 needs to connect to steering key 1 from the radio, Pin 21 needs to connect to steering key 2 from the radio . If it doesn’t work, swap the key 1 and key 2 wires to the the opposite pins.
can it show the vehicle Maintance like the stock system ie milage to change oil. and oil filter
The top screen probably will. The radio, no
How do you “tap” into the reverse wire with your back up camera wire?
Connecting the camera 12v red power wire to the 12v positive wire of the reverse light
I want to retain my original camera, how do I go in about that? I know I need a harness, but how do I install it?
You will need a harness. The Metra “AXBUCH-T16V” or “AXBUCH-T1” instructions come with the harness but it’s just connecting it to the matching harness from the car then plugging in the video cable to the back of the radio for the camera input
I have the same and I can't figure out where the antenna power wires connect. I get no signal on many channels.
They should be connected together, Car side & radio side harnesses. You can also connect them to red 12v switched power wire
Got steering wheel control to work, but it won’t save the settings. Any idea? It will retain the programing for a day or few hours but after it performs a different function. For example, up volume is next track, down volume is up volume. It’s all mixed up. Suggestions? 😢
Are you using the plug & play kit or did you manually wire SWC key 1 & 2?
@@DMWAUTOSS I'm using the plug and play kit that fits directly to Toyota's harness.
@@gn3ricc okay, factory reset the unit & try relearning the steering wheel keys. If that doesn't work, contact customer support on amazon & get them to send you the harness with the canbus decoder box.
🔥🔥🔥🔥
We working 💪🏾💪🏾
How did you get the steering wheel controls to work I have that same head unit and my don't work at all the system wont even program them
@TheRegulator1870 you have to tap Pin 21(yellow),22(purple),23(black) on the 28 pin connector. 21 goes to SWC-1 wire ; 22 goes to SWC-2 wire ; 23 needs to be grounded to chassis . If it doesn’t work swap pin 21 to SWC -2 wire & 22 to SWC-1.