Great job. I am about to tackle the same install. Like the way you cut out the unnecessary points. I have already run my backup camera in preparation. I was able to unfasten the rubber weather loom and use a long rod or screwdriver to push through it. I then attached a cable with take and pulled it through. once through I attached the camera cable to the pull cable and used a little WD40 to help it through the loom. It went through without issue. Again, great job.
Hi, great video. I saw three plugs that you removed from the old stereo. You plugged the new red harness into the large white plug, but I did not see you use the small white plug. Is that not needed for the new stereo? Thanks!
Awesome video man! Thank you. I’m having some trouble with the steering wheel buttons, they’re connected to the white/black and the brown is grounded, did you have to enable a setting or something? Even when trying to program them, they are not responsive
@@DMWAUTOSSI do have another question though if you wouldn’t mind taking a stab at it. Have you gotten your red time/direction panel working right by the hazard switch? I have the same year Mazda 6 as you do things were nearly identical. Also, there were 2 main connectors coming out of the old head unit. The one is connected to the new wiring harness but the other one is left disconnected as it has nowhere to go. Is this meant to be? Thank you in advance!
Great job. I am about to tackle the same install. Like the way you cut out the unnecessary points. I have already run my backup camera in preparation. I was able to unfasten the rubber weather loom and use a long rod or screwdriver to push through it. I then attached a cable with take and pulled it through. once through I attached the camera cable to the pull cable and used a little WD40 to help it through the loom. It went through without issue. Again, great job.
🙏🏾🙏🏾
Thanks man gonna work on my soon and this gave me the answer to my question
🙏🏾🙏🏾🙏🏾
Good video nice job but I could not see where you drilled the plastic and what size hole I am doing the same car this week
Very informative video. It helped me through an install! Thanks dude!!
Hi, great video. I saw three plugs that you removed from the old stereo. You plugged the new red harness into the large white plug, but I did not see you use the small white plug. Is that not needed for the new stereo?
Thanks!
That is correct, it is not needed for the new stereo
Thank you for your reply, keep up the good work!
Would a 9 inch fit in the double din kit since it usually sticks out so it wouldn’t have fit inside the kit like the 7?
The 9” would fit as long as it has the standard double din back side to it for the mounting
@@DMWAUTOSS I appreciate it. Video helped lots 🙌🏿
Wow thank you so much ! I just subscribed 🫵😉
Wut after market radio brand and model r u installin?
All parts used are listed in description
Awesome video man! Thank you.
I’m having some trouble with the steering wheel buttons, they’re connected to the white/black and the brown is grounded, did you have to enable a setting or something? Even when trying to program them, they are not responsive
Nothing to enable, just program the buttons. What year is your Mazda?
@@DMWAUTOSShey! 2012, turns out it was a mislabeled key 1 wire on my head unit. It the key 1 and reverse wires were swapped.
@zman-es3ck cool, glad you figured it out
@@DMWAUTOSSI do have another question though if you wouldn’t mind taking a stab at it. Have you gotten your red time/direction panel working right by the hazard switch?
I have the same year Mazda 6 as you do things were nearly identical.
Also, there were 2 main connectors coming out of the old head unit. The one is connected to the new wiring harness but the other one is left disconnected as it has nowhere to go. Is this meant to be?
Thank you in advance!