How to Install a 2nd Rain Harvesting Water Tank

Sdílet
Vložit
  • čas přidán 19. 07. 2024
  • In this video, we show you how to add a 2nd water tank to your existing rainwater harvesting system. Shop online for water tanks by following this link: goo.gl/85QV8P
  • Jak na to + styl

Komentáře • 19

  • @harryclarencealexander9161

    I agree that the second tank does not need an overflow outlet BUT it must have some sort of breathing aperture e.g. drill 2 or 3 small holes in the lid. If there is no breather the 2nd tank may have difficulty filling up or releasing water fast enough when needed.

  • @ofcv1238
    @ofcv1238 Před 11 měsíci

    2:31 clearer Teflon tape wind guidance is: wrap Teflon tap in same direction the female fitting will thread on to tighten.

  • @ofcv1238
    @ofcv1238 Před 11 měsíci

    Great video; isolation valves critical & great advice. I missed pump functionality…are you using for household supply? I have always felt we should all be showering & flushing toilets with rain water.

  • @victoriatrestrail
    @victoriatrestrail Před 4 lety +1

    Thank you. Can you give some advice for someone who can not get materials to make a concrete level ground for the tank. The surface of the area is dirt.

  • @charlesmtshali4179
    @charlesmtshali4179 Před 5 lety

    Which water pipes are ideal for domestic hot and cold water supply for usage , ( bathroom and kitchen ) ??

  • @Fraidecat
    @Fraidecat Před 2 lety

    What type of pipe and fittings are you using that merely slides together?

  • @hayleyscomet1
    @hayleyscomet1 Před 5 lety +2

    Looks good , well done

    • @BuildersFan
      @BuildersFan  Před 5 lety

      Thank you Wayne. :) NM

    • @hayleyscomet1
      @hayleyscomet1 Před 5 lety +2

      Actually watched all your Vids Thanks. Based in durbanville , still trying to figure it all out , but getting there. Thank you

    • @sylp832
      @sylp832 Před 3 lety

      @@BuildersFan HOW DO YOU CONNECT5 A 3RD TANK? HELP!!!

    • @harryclarencealexander9161
      @harryclarencealexander9161 Před 2 lety

      @@sylp832 Just repeat the same process

  • @user-kg3wl9jg7c
    @user-kg3wl9jg7c Před 11 měsíci

    excellent

  • @tom95521
    @tom95521 Před 2 lety

    What model pump (blue with motor) is that in the video? Thanks.

  • @user-fm1ho6gq4v
    @user-fm1ho6gq4v Před rokem

    How do I add second tank which is bigger than first one?

  • @ritch90
    @ritch90 Před 2 lety

    hi just some law of physic question. when the water starts to flow in both of the tank will be fill up at the same rate / amount of water right? or the on the at the left extra tank will be filled to the top before the right side water ball stops the flow of water going in.

  • @salehalsabih
    @salehalsabih Před 2 lety

    so when pump starts , it will suck water from any of both tanks whichever has higher water level?

    • @conniedebeer8058
      @conniedebeer8058 Před 2 lety +1

      the two tanks (or what ever number you have connected) can be seen as one huge tank - there's no higher or lower.

    • @AB-hu2uw
      @AB-hu2uw Před rokem

      you didnt go school i take it ?