I replaced my stock bulbs last month with 2700k “warm white”. They kept the stock green look however they are now significantly brighter. I also picked up the offset 194 sockets from GM as the 03 style are discontinued from Mopar.
i can say they are a pain in the a$$ as led's need to be installed correct as they are polarized and work one way most are cheaply made and some times theres issues with getting the socket to make contact to the cluster board ill install them and work my way from left to right install remove and reinstall
Hey Matt maybe you can help. I bought a 2005 ACR. It wouldn't go into gears. I work at a Dodge dealership. The techs told me I needed a new clutch. I ordered a factory mopar clutch and had them install it. Now a week later I am still having issues shifting into 4 of the 5 gears. Any suggestions 🤔 I am kinda ticked. $1100 later and it's not fixed. I am afraid they will dance all around the real issue to milk me for more money. Any advice would be greatly appreciated. Thank you.
was the fork replaced? have you checked the master /peddle push rod up under the dash if every thing is working and the clutch is releasing it could be a cable/ bushing issue or worse case an internal trans issue but try the few things i've mentioned first if need any thing else ask
Hey matt i need your help i have a question. I have an 05 srt4 and i did the boost leak test and it has no leaks. The problem is when the car is cold or has not been running long it hits 13-14psi but once the car gets to normal temp it will only boost to around 7-10 psi. The car is fully stock do you think it can be the wastegate or the boost solenoid?
Hey Matt I replaced my bulbs with leds and at first it worked and now none of my lights work.. checked fuses and wires and everything is good what else could I be missing?
I'm a little late but have you checked the malfunction switch plug end they are know for going bad ? i have a video on that other then that checking fuses check your ground wires.
@@Mattsneedforspeed so the plug and the wires are fine. Im checking the fuses out right now. On the interiors fuse box i had noticed a 20a is loose coming off so that might be it. Also noticed the fuse for 12 is not there next to 11.
question... the panel shows green numbers and green indicators... stock. if i change the ligths to a blue or whithe led, it will change the colors? thanks
I replaced my stock bulbs last month with 2700k “warm white”. They kept the stock green look however they are now significantly brighter. I also picked up the offset 194 sockets from GM as the 03 style are discontinued from Mopar.
njshift blue matches the car color but I think I’d rather have white..
I hear you. I just wanted the readout to be brighter.
Where can I find these blue leds?
Hey Matt, I’ve replaced my cluster lights with blue LEDs , but my led for my redline doesn’t work. Any ideas?
i can say they are a pain in the a$$ as led's need to be installed correct as they are polarized and work one way most are cheaply made and some times theres issues with getting the socket to make contact to the cluster board ill install them and work my way from left to right install remove and reinstall
Hey Matt maybe you can help. I bought a 2005 ACR. It wouldn't go into gears. I work at a Dodge dealership. The techs told me I needed a new clutch. I ordered a factory mopar clutch and had them install it. Now a week later I am still having issues shifting into 4 of the 5 gears. Any suggestions 🤔 I am kinda ticked. $1100 later and it's not fixed. I am afraid they will dance all around the real issue to milk me for more money. Any advice would be greatly appreciated. Thank you.
was the fork replaced? have you checked the master /peddle push rod up under the dash if every thing is working and the clutch is releasing it could be a cable/ bushing issue or worse case an internal trans issue but try the few things i've mentioned first if need any thing else ask
Hey Matt how do you remove the noise that come on when the check engine light comes on. The chiming noise?
Hey matt i need your help i have a question. I have an 05 srt4 and i did the boost leak test and it has no leaks. The problem is when the car is cold or has not been running long it hits 13-14psi but once the car gets to normal temp it will only boost to around 7-10 psi. The car is fully stock do you think it can be the wastegate or the boost solenoid?
ide try wastegate first
Hey Matt I replaced my bulbs with leds and at first it worked and now none of my lights work.. checked fuses and wires and everything is good what else could I be missing?
I'm a little late but have you checked the malfunction switch plug end they are know for going bad ? i have a video on that other then that checking fuses check your ground wires.
Matt's need for speed hey I’m late too😅 I ended up turned bulbs around like swapping connectors sides and it worked
When i installed my blue lights my odometer completely turned off and nothing turns on from the odometer except the gas light, airbag, seatbelt etc.
johnathan tacosauce hello I would recheck the plug for the cluster and recheck any other plugs for damage or lose wires and fuses
@@Mattsneedforspeed so the plug and the wires are fine. Im checking the fuses out right now. On the interiors fuse box i had noticed a 20a is loose coming off so that might be it. Also noticed the fuse for 12 is not there next to 11.
question... the panel shows green numbers and green indicators... stock. if i change the ligths to a blue or whithe led, it will change the colors?
thanks
Yes green, what I can say is I put blue ones in and it looks blue
perfect thanks