INSTALLING THE STEERING ASSEMBLY IN CELYNA'S 32 FORD HOT ROD - PART 4

Sdílet
Vložit
  • čas přidán 19. 08. 2023
  • In this episode we continue on with Celyna's 32 Ford Hot Rod. We install the passenger side brakes, the Borgeson steering box and rest of system but not before making some minor modifications to the steering box.
  • Auta a dopravní prostředky

Komentáře • 23

  • @airecraft1
    @airecraft1 Před 10 měsíci +1

    We discovered reamers years ago we had to Re drill 3/8 holes to 5/8 through steel. A reamer is a really nice way to upsize a hole in metal

    • @calirod
      @calirod  Před 10 měsíci

      Thanks for the tip!

    • @timferriss905
      @timferriss905 Před 9 měsíci +1

      We use a reamer to cut for new bushes in old spindles. If you can get a set there worth it.

  • @ciscokidfab7595
    @ciscokidfab7595 Před 11 měsíci +1

    Nice mock up of the front.

    • @calirod
      @calirod  Před 11 měsíci

      Thanks, comes together pretty easy... so far :)

  • @keithballinger5081
    @keithballinger5081 Před 11 měsíci +1

    Very nice , Bad Azz!.

    • @calirod
      @calirod  Před 11 měsíci +2

      thanks Keith! appreciate you taking the time to comment!

  • @timferriss905
    @timferriss905 Před 9 měsíci +1

    Can you tell me if you can get hardware kits for the so cal hidden disc set? I got a set up from a swap meet and yes most of the hardware is missing. Also noticed that your back plates are polished but not the drums. Any reason for this. I’ve also got a set of Buick front brakes for the future. My eldest grandson has his eyes on them. Very cool and enjoyable content. Cheers from England. Tim.

    • @calirod
      @calirod  Před 9 měsíci

      Hey Tim, from my understanding you cannot buy support parts separately however I might have a few solutions. Feel free to send me an email bnunez@calirod.com and I can do my best to help!

    • @timferriss905
      @timferriss905 Před 9 měsíci +1

      Thanks very much. I will certainly send you an e mail.

    • @calirod
      @calirod  Před 9 měsíci

      I'll keep an eye out! @@timferriss905

  • @peterilling1627
    @peterilling1627 Před 10 měsíci

    Make sure you always grease your bearings even on a mockup.

  • @greghapp1681
    @greghapp1681 Před 11 měsíci +1

    What frame are you using

    • @calirod
      @calirod  Před 11 měsíci

      from my knowledge its an old SoCal frame, we did not buy it new... the chassis seemed to be sitting for sometime along with many of the parts.

    • @greghapp1681
      @greghapp1681 Před 11 měsíci +1

      @@calirod Thanks for the information.

  • @BIOMAXABLE
    @BIOMAXABLE Před 11 měsíci +1

    WHAT no grease on those front bearings????

    • @calirod
      @calirod  Před 11 měsíci +3

      Not yet! Mock up only for now then the entire thing comes apart, painted then grease, fluids etc etc on the final assembly 😊

    • @BIOMAXABLE
      @BIOMAXABLE Před 11 měsíci +1

      @@calirod 😃

  • @ROSCO969
    @ROSCO969 Před 5 měsíci +1

    This is an excellent build and I'm enjoying following it, but her baby talking is beyond irritating. My wife even thought it was excessive and she has saintly patience.

    • @calirod
      @calirod  Před 5 měsíci +1

      Yup, it’s tough for some people to look past certain aspects someone’s personality. However I love it, it comes with her being a teacher and not taking life too seriously 👌🏽
      Thanks for following along

    • @ROSCO969
      @ROSCO969 Před 5 měsíci +1

      @@calirod I respect that. She does seem well suited to be a teacher. Keep up the great work!

    • @calirod
      @calirod  Před 5 měsíci +1

      @@ROSCO969 Thanks Rosco! cheers and all the best.