Radiolink RC6GS V3 unboxing and basic setup/binding
Vložit
- čas přidán 5. 07. 2022
- Radiolink RC6GS V3 unboxing basic setup/binding a side by side comparison with the previous two models hooking up the receiver and demonstrate it working filmed with the samsung s22 ultra and edited with powerdirector pro
RC6GS link👉amzn.to/3OKvibk
#radiolink #rc #rc6gs - Zábava
this radio has a 30 model storage not 10 I apologize for the mistake sorry everyone
As a paraplegic that battery telemetry can be very handy. Having enough power to drive back to the house or to the car makes things easier.
Thank you very much
*Thank you for the unboxing of Radiolink RC6GS V3~ Thank you for the very good information!~ Awesome video as always bro, great job 👍💪😀*
Thank you very much
Hey love your videos. keep up. keep posting. Take care & Wish you a Happy day 😃
Great unboxing video my friend. Very good explain 👍👍👍👏👏
Very good review, 30 model memory and being able to switch on the fly is pretty great!
Wow is it really that easy to switch between models with a flip of a switch? What setting is that?
That's an impressive unit 👊💯
It really is a great radio I really like it
Excellent radio my friend good video👌👌👌👍
Great review. Radiolink is awesome. I’m also a fan. Currently using 2 rc4gs v2 to control my entire fleet of cars and they work great. Very dependable and reliable.. not to mention budget friendly. 👍😊
I'm just getting into this. Would you recommend the 4 over the 6? Thanks
@@fxdwings depends on your needs. If you need more channels and a higher car storage memory, then the 6 will be the one to go for. 😊
Thank you for sharing a good video, friends👍🎶🤝
Thank you very much my friend
BEST VIDEO EVER MAN THIS IS AMAZING!!
Thank you very much
Thanks for the information.
Thank you
Hi there Brent, it’s a very nice RC radio indeed. Lots of model memory capacity and solid build quality. I’m impressed. Take care and best wishes to you and the family 😉😁😊🇬🇧🇺🇸
Thank you very much John my friend itbhas so many features I have been studying like I'm in school 🤣🤣
@@AdventureTimeRC I’ll test you at the end of the lesson, pass mark 80% or above only 😂🤣😂
Those radio have loads of features, I use GT-5 as my go to radio. I like that these modern radio's they use a lot less power, my first Acoms 2 used 12AA and they did not last that long.
Yeah the old radios cost you a hours pay just to get batteries I can get hours out of a 800mah 2s
Looking good
Thank you very much
I'm waiting for mine to arrive tomorrow. I am looking forward to install this receiver on my excavators and cranes too.. Hopefully I'll be able to set up a Skid Steer system with this controller.
Thank you for watching it should be able to lots of channels and mixing options to choose from
Excellent controller dude😀😀👍👍
Thank you very much
I HAVE A DUNE 24 DEEZ VIDEOS ARE AMAZING 👍
KEEP IT UP
I still use this concept of carnality even with the new unit available.
10q very much for sharing 😹👍
Thank you very much
For telemetry, does Radiolink have something for IC5/EC5 connectors, Dean's, etc.?
Nice
Thank you very much
How is the throttle throw on it. I had the rc4hs v1 and loved it. I got the v3 and can't stand it. The throttle throw is so small it's hard to drive anything. I wonder how it compares to the rc6gs.
the V3 has 30 model storage homie 👍👍
I didn't even see that thank you that's awesome this radio does so many things it's hard to cover everything properly
The GT-5 can be set with 4 steering options for crawlers - front-back- crab-opposite lock. Does the RC6GS V3 feature the same possability?
I have not tried that mixing myself that's a good question
Does the v3 work with v2 receivers?
Great video. I do have a few questions; do you have any recommendations of 4s lipo batteries that would fit in the compartment? I am having huge problems finding the button to engage the gyro function. It feels like more of a hole on the side of the receiver than a button. Is this correct? Also what is the easiest way to convert the telemetry cable to ec5?
I use 2s in the radio they fit easily and last a long time it should be the same button you used for binding and if you need a ec adapter you can solider one together or if you have a hobby store close by you they would probably be able to make one for you
@@AdventureTimeRC Thank you for the help. Other than longer run times is there any advantages to using 4s vs 2s, for example range or anything else? Also my issue with the button is it almost doesn’t seem to be there. If I try to press it with an Allen key it stops at one point and goes in very deep angled slightly different. Doesn’t really seem to press a button though. I did manage to hit it one time as the light went blue but couldn’t recreate that. I’m thinking my button may have been damaged.
Look into the noble nb4,can control more than 1 rc at same time
What does Simulation mode work? Does it work with a PC for gaming. I have a MCBook Pro M1 and an iPad Pro M2. If it works I like to use it with my iPad Pro. In some Racing Simulations.
Can you now program the switches & buttons or the set like in v2?
Yes you can program the switches so many features I am trying to get them all memorized
👍👍
Thank you very much
Good to see 30 model memory now. a couple things I did not like on my radiolink radios that I told them about is the steering trim button should be the button on the top of the steering wheel and the steering duel rate should be on a quick access button on the radio and you should not have to go into the menu to change steering duel rate like all other radios when racing you can't go into the menu to adjust the duel rate for the steering it needs to be externally on the outside of the radio. They could have fixed this but it looks like they did not and this to me is a big reason why not to get a radiolink radio.
Thank you for watching Steve you can assign dual rates to any switch on the radio including a 3 position switch for 3 different rates I really like this version it has even more features than the previous 2 but a radio is all about preference and you honest opinion is always welcome here 😀
@@AdventureTimeRC Hi could you only do this on the V3?
@@ShenRC I believe so I found the information under v3 only I you might be able to do a firmware update to the older models but not sure I will do a video on dual rates soon so you can check it out
I am doing research. I want to 3D print my own RC car and a Boat design. What ESC and SEROs would you recommend. Does anyone know where I can find more info that I can read up on? Most info. Show you how to use the radio itself but not the other parts need for a DIY project. Thank You.
what does telemetry do? whats the cable for? sorry im new haha
It is the radio being able to send and receive information like battery power and signal strength and the cable is for updates thank you for watching
Great Video - I just got this transmitter and I am very new to the hobby. I have a question about the receiver, I have a Losi Mini T brushed, and although I was told it will work with my RC car I have my doubts. First, it seems I need an adapter for the telemetry as I have smaller ec2 connectors (radiolink has the XT60 connector) and I am not really sure where I would connect the "throttle" as I dont see anything else coming off of my Esc.. UGH anybody be able to point me to some info? I've tried radiolink already so might as well reach out to the community.
Are you trying to use the esc reciver combo that's on the mini t if so you will need a different esc like a hobby wing 1060 would work good
@@AdventureTimeRC Thank you so much for responding! I was told specifically by radio link that my stock speed controller would work but I think they might be mistaking my model with the brushless version.
I'm looking at the 1060 - would I just take a cable to where I put the jumper for the mode selection (forward/brake/reverse) to the radio link receiver to control the throttle?
Sorry for the basic questions, very new here.
How would i make the adapter for a 2s battery?
Any battery with the red jst connection will work you can make a adapter from whatever battery plug you use to red jst
Do u need to connect that telemetry?
Only if you want works fine as a normal reciver without it
My steering was working, but my throttle was reversed, I switched the throttle to reverse and my steering doesn't work anymore, I put it in a traxxas xrt ultimate.
So the double antenna. Ones for telemetry. I thought it was for longer range. Thw double says it's longer then the single. (Range)
It is for long range but also one transmitts the signal back to the radio for telemetry
@@AdventureTimeRC how do u know which ones for what. Incase I didn't use telemetry and only used one sticking out. One tucked in the reciever box
😁😁👍👍
Thank you very much
is it water proof i like to play in the rain ! ty
Yes it is the car in the rain not the radio I have fully submerged the receiver it still is working good
this or futaba 3pv?
So u don't have to put transmitter in blind mode it's just holding bind button on receiver
Battery telemetry is work for one battery
cool video. Appreciate May video!🚌🚐🚑🚒🚓🚕🚗🚙🛻🚚🚛🚜🏎🏍🛵🛺🚲🛴🛹
Any contact info to radiolink ? Phone number? Thanks
Just reach out to them on any social media platform they are everywhere and pretty good about responding