Why Aren't All My Grill Burners Lighting? (Easy fix)
Vložit
- čas přidán 30. 05. 2021
- Are only a few of your grill burners actually lighting? Learn how to fix this issue step-by-step
Amazon Affiliate Link(s):
Flathead screwdriver: amzn.to/3E68T4k
Needle Nose Pliers: amzn.to/3tw21Iu
Cross members (Full kit): amzn.to/3GfP117
Disclaimer:
I am not an expert, just an average Joe who enjoys DIY'ing. Learn, Save, DIY assumes no liability for property damage or injury incurred as a result of any of the info from this video. Use this information at your own risk. Due to factors beyond the control of Learn, Save, DIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Learn, Save, DIY. - Jak na to + styl
Thanks so much for referring me to this follow up video. I think I just need to use a screwdriver to loosen up the screws so they'll be lifted up more to thread the metallic pins thru easier, and then I can just screw it back down tight. That's really the only thing that was giving me problems, I was just concerned about whether or not the screws could even be moved. Now that I know they can I'll try it when I get home! Thanks!
Thank you! I need new cross burners! I just didn’t know what they were called! That’s all I need along a good cleaning! Grill is only about 2 years old!
Glad the video helped! Only a couple dollars and parts and she will be back to her former glory. Cheers.
@@learnsavediy Yes I knew I could get parts. Just didn’t know exactly how to find the parts for grill I had! Wasn’t a easy walk into store and pickup
Thank you so very much!!!! It fixed my problem 😃
Nice work!!
Thank you for showing this, but help me understand how a flat piece of metal conducts propane (or helps it travel) over to the other burners. Are these cross burners supposed to also catch on fire to serve as a bridge for the propane?
You’ve got it. It’s just a tunnel to help the fire travel from one burner to the adjacent ones. The burners are too far apart to light each other so the bars act as controlled passage of fire to the other burners.
Thank you! For my grill, from left to right, #s 1, 2, and 4 light up fine with #2 being the igniter. #3 however does not light even with a match. I don’t even hear gas coming through when I turn the knob. Any ideas?
Might want to try cleaning out the end where the burner meets. Sometimes spiders build webs/nests or debris gets in there an covers the hole that enters the burner. Try cleaning it with a tooth pick
These cross members do not come with the grill upon purchase. How would one know to do this? Only half of my main burner is lighting; not the entire burner. Ideas and advice? Char Broil not a help after sending me parts that didnt solve the issue
What's the model number. This is very odd it didn't come with it.