Turning a bottle jack into a hydraulic cylinder .
Vložit
- čas přidán 3. 02. 2024
- I made this hydraulic cylinder to test mini hydraulic pumps .
Please comment your opinion on this Video and don't forget to like , subscribe , share & press the bell button if you enjoy the content .
Very impressive. You turned a bottle jack into a bottle jack without a base. So what would you use this for, definitely NOT lifting a car anymore.
Not too long ago I was wondering how hard this would be to do. Great work!
My heart is bleeding while observing how you operate with teflon tape...
This guy can stop that bleeding heart with a roll of Teflon tape😂😂😂😂😂😂
kinda redundant it was already a hydraulic cylinder. You just eliminated the self contained pump and holding valve. if you wanted external power it would be easier to just modify the pump section
I was thinking the same thing 🤣🤣🤡
Dad and I did this in about 1975. I am 75, Dad died in 95. We built a hydraulic press from a piece of bridge girder, channel, drilled and tapped a jack base, and used a 2 way selector valve to hook it to the pneumatic hydraulic pump off our Weatherhead hydraulic hose machine. We changed MANY axle bearings with that old girl. I wish I still had it. We did not need a lathe to drill the base, either.
Dad sold his store AND GOT SCREWED BY THE NEW OWNER, a shyster named Steve Wuerst who went bankrupt and cost my Dad lots of money. I am convinced he helped shorted my father's life.
Cool 👍
Thanks 🌹
I like these videos where you repurpose something you don't need into something you do. Cool.
verygood👏👏👏
um, it's already a hydraulic cylinder
really nice work, impressive!
Thanks a lot 🙏❤️
What is this good for ?
Cool
🙏
good job
Thanks 🙏
if i replace the release valve with a mnual pump cover the return hole im gonna have a cilinder without soldering enything?
👍👍👍
❤️
Very good 👍
❤️
Very good 🏁
Thanks a lot 🤍🙏
Det var unikt❤😍
Thanks ❤️😘behi joon
Not sure why you even reinstall the outer jacket it’s only there to hold the oil when it was a jack, also it’s a very low pressure cylinder with the fitting and hose you have on it.
Showing a "hydraulic" cylinder tested with a low pressure air supply, which is normally around 120 psi.
Common hydraulic systems can often run at 3000 psi. Maybe show it operated with more than that to add in a safety factor. Saying that, I have no idea what's the maximum pressure these hydraulic jacks can run at.
Otherwise enjoyed watching the video, just for fun.
👌👍👍
❤️
How much will it lift now ?
I’d just order one from Northern.
❤👍
❤️
It would have been easier and quicker to build a ram from scratch
👍
Yes but not as much fun, some things are satisfying to make yourself.
❤❤❤❤
Powered by air = *Pneumatic* =/= hydraulic
Ok so… If you can afford to buy a lathe. You can CERTAINLY afford a $25 Chinese hydraulic cylinder. And then it would be double acting. These videos are getting completely out of hand…
They are NOT getting out of hand... There are simply people who make a living with these videos and invent all sorts of stupid things for LOOKY people like us who also watch a scapa crushing shit... You can now see these jacks in all sorts of ways 🤣🤣 🤣
@@lucarambaldi2731 Thank you for giving the definition of out of hand…
Maybe he's just a person that likes making stuff.
@@brandoncrimmins6296 BUT PLEASE IMAGINE DEAR SIR
The lathe is nice to have but not needed at all.
Just buy one, they are made to do the job, this thing could kill someone.🇦🇺
🫠
amazing 😍👌
Ham hay de bonesh
Amazingesh boresa
😂😂@@metallantik
Never leave the chuck key in a lathe...even when off!
What about the hole in the Bottom?
nice and interesting👌👏
Veresaei de khao meni 🤣
😅😂daei
Before turn the base why didn't you cut off the major caseing save lot of turning and not so much vibration when turning
Ya but shorter view hours.....
Now that I've read all the comments, I realize that obviously no one - again - no one has read the video description.
It describes exactly the purpose for which this conversion was made... He also demonstrated it in the video...
But reading, seeing and understanding is probably too much to ask for some people.
They prefer to write stupid comments.
Not exactly. He turned a hydraulic jack into a pneumatic cylinder.
WHY?
A hydraulic jack IS a hydraulic cylinder *ALREADY*
Paint certainly fixes an excentric circle.
WAAAAIIITTTT! you said you were making a HYDRAULIC cylinder, you made a pneumatic cylinder.
So ... turning a hydraulic cylinder into a hydraulic cylinder.
That is the biggest interrupted cut that I've ever seen on a metal lathe. Why?
Next week's video: Turning Ice into water
How long is the plastic fitting going to last before it explodes under pressure, bloody sure I wouldn’t trust that setup, but interesting vid all the same 👍🏻
He said hydraulic, in fact its pneumatic
How do you make it go down?
Gravity and a lot of spare time, or he modifies the misus 's vacuum cleaner and valves in vacuum to extract the air
Why doesn’t that old rubber plug in the side where you used to put hydraulic oil blow out under air pressure?
Because the outer cylinder Was merely a reservoir for the jack to draw oil from and return to, He sealed off any connections to that part and only left one port that connects to the inner piston which runs inside the pipe you saw during disassembly
mardi marrrrrd❤
Nazguuul
You just BROKE a good working jack.
ONE CAN USE FOR SHORT RANGE CANISTER SHOT.
Det var veldig elegant🎉❤
☃️
Azize mni❤
If you have no other way to make such a cylinder and it's the right stroke length.
You mansged to save the valve ball!
👍
Si tienes ese torno, es mejor hacer un cilindro
Hermosa Linda Video ❤❤❤
Thanks 🙏🤍
Eso es como hacer un billete de 50 euros, borrando un cero al de 500 euros
Pneumatic, not hydraulic.
Why
I.M.I.A.P
Interesting to see how things are made and how we can use them in many ways. Yeah, maybe you can buy a Chinese hydraulic cylinder for super cheap, but do you really understand how everything is designed? Well, I found this video interesting and gets my creative instincts in gear. Thanks for making this video.
😅😅😅😅😅😅
Был домкрат , но ведь надо же высрать видео как угандонить домкрат .Главное зачем это ,куда это применить ? Нужен гидроцилиндр- купи в любом пункте втормета , там нет?- сделай, у тебя же , сука есть токарный станок и газовая сварка ...... Домкрат то портить зачем ?
Most of the comments I receive from Russia always contain at least one rude word
To much tape
This is stupid and pointless.