Fusion 2 Water Softener Regeneration How to Regenerate Clack WS1CI control valve

How to manually regenerate your Fusion 2 water softener or manual regenerate Fusion 2 water filter. This video will also apply to any water softener which uses the Clack WS1 control valve or Clack WS1CI control valve.

[@adamblakeley2592]

Thank you for your time and knowledge. 🙂

[@Jammer170909]

New to water softener. Plumber explained nothing but add salt once a month. Instructions list doing a bunch of arrows after adding salt. Do you wait to add salt when display indicates salt low or how do I know if my unit prevents has the low salt option. So many questions and can’t seem to find any answers. Oh and change the UV filter and turn a bunch of valves before you do that. And here’s a tap to drain water. ☹️

[@RoseannBertram]

during regen son thought something was wrong and put water into bypass . Will that cause a problem with unit

[@jonathanreyes1342]

When should the salt be added? Before all of this or after the regeneration process?

[@luismelendez903]

Always have salt in the brine tank.
Never mind anything else.
No salt, no water softening.

[@asics1]

@@luismelendez903when you say brine, should there be water in my salt reservoir? Should I see it or is the water very low? My salt is about 9” from the top of my 32” reservoir.

[@luismelendez903]

Water should be seen in the salt tank.
Its mixes with the salt to create a brine.
That brine is what goes into the tank.
Dry salt will not do it.
Also, if you have rust, use Rust Out in the brine tank too.
It eliminates rust stains.
Follow the instructions on the bottle of dry Rust Out powder.
Should be a little brine.
As long as there is brine, it will work.
1 bag of salt, (40 lbs.) should last a month.
Yes, not a lot of water but water must be present.
My tank usually has 1 bag of salt and a little water around the bottom of it.
The Clack uses very little salt.
I rebuilt my system.
I will keep an eye out for you.
If you need more help, let me know.
I rebuilt my system.
I can help.
I had a plumber install it with very few beads inside the tank and 2 years later he wanted me to buy another system because "this system doesn't work with your water."
1,000 dollars more.
I fired him.
If you are using more than 1 40 pound bag of salt per month, there is a problem.

[@LathamTeam]

Hi. My Brine tank is over 3/4 full of water. Too much ? Salt is about 14 inches deep off the bottom

[@yraglareb8741]

Yes,

[@shawnapel632]

Do you know why Mine started flashing salt fill.. after a regin?

[@rubenrindinella3816]

What happens after you force a regeneration?

[@shawnapel632]

It goes straight into the backwash

[@alfredodasilva101]

Why is this showing on my screen SALT FILL

[@lilyl582]

Mine too. Have you found out an answer?

[@alfredodasilva101]

@@lilyl582 no, sorry