How to Check DYSON V11 Vacuum Cleaner Motor with Multimeter?
Vložit
- čas přidán 3. 11. 2023
- How to repair/fix Dyson vacuum cleaner. How to check Dyson V11 vacuum cleaner motor with a multimeter.dyson repair. Dyson fix. In this video, we will guide you through the process of checking the motor of Dyson V11 vacuum cleaner using a multimeter. We will show you how to properly connect a multimeter and measure resistance to make sure the motor is working correctly. This step-by-step tutorial will help you troubleshoot motor problems and make sure your Dyson V11 vacuum cleaner is running smoothly. The Dyson V11 vacuum cleaner motor I show in the video works smoothly. You can measure the motor of your own vacuum cleaner, using the measurements you will see in the video as reference. If you found the video useful, you can like it and write any questions you have in the comments section.
Aliexpress Venlap Official Store
bit.ly/3lGOLjE
Aliexpress VENLAB VM-200M Multimeter sales link
bit.ly/3xt81DL
Aliexpress 2$ discount code
3TB5OID0CWKM
venlab multimeter review video:
• Unlocking the Secrets ...
My other repair videos.
bit.ly/3k8NzRH
My DIY videos.
bit.ly/3j4aOgr
You can contact me via e-mail elektronikatolyem@gmail.com
Do not forget to "like" the video if you like it. You can subscribe by clicking to not to miss new videos / @electronic7979
#repair
#fix
#circuitboardrepair
#electronicscreators
#elektronikkarttamiri
#elektroniktamir
#electronicrepair
#tamir
#electronics
#dyson
#dysonrepair
#dysonfix
#vacuumcleaner
#vacuumcleanerfix
#motor - Jak na to + styl
Aliexpress Venlap Official Store
bit.ly/3lGOLjE
Aliexpress VENLAB VM-200M Multimeter sales link
bit.ly/3xt81DL
Aliexpress 2$ discount code
3TB5OID0CWKM
venlab multimeter review video:
czcams.com/video/FiJ85YdUPd4/video.html
My other repair videos.
bit.ly/3k8NzRH
My DIY videos.
bit.ly/3j4aOgr
Nice meter and soldering 👍
Thank you for your interest and valuable comment, my friend.
Very useful video. Thanks a lot!
Thank you for your interest.
İhtiyacı olana güzel bilgiler eline sağlık.
İlginiz ve değerli yorumunuz için teşekkür ederim.
Nice
thank you
Amazing
thank you
Muchas gracias
thank you for your interest
Hola, el motor de mi aspiradora hace un zumbido pero no gira, que puede ser?. Gracias. Muy buen video
Thank you for liking my video. The problem is most likely due to the motor driver MOSFETs on the circuit board.
What did you use to remove the coating on the terminals
I cleaned the coating with isopropyl alcohol. I removed the solder on the motor ends using a vacuum desoldering iron.
Buenas se me lleno de agua el aspirador dayson v10 hemos cambiado batería y motor y sigue sin funcionar
Solder sucker hangi marka baya iyi çekti?
Merhaba cihazın ismi: xytronic 988d soldering and desoldering station
добрый день. могли бы назвать маркировку микросхемы U12 .как она в миру зовётся?
Hello my friend.
Unfortunately, I have no knowledge about this integrated circuit. I couldn't find any database on the internet. What was wrong with the cleaner?
Hi Tell me, is there a forced engine shutdown, mine has started to work unstably?
I do not know exactly. There may be a solder crack on the electronic circuit board.
V11 motor tamirati yaparmisiniz ??
arıza neydi
Nice CZcams. Dyson V10 What if only one "boom" sound with full battery light on, but motor do not move ?
Hello. The motor or driver mosfets may be faulty.
@@electronic7979 Thx!
@@jamescheung6004Do you have any progress of fixing you motor? I have the same issue.
@@licysaab finally, I ve replaced it by new motor (Alibaba) and sell the old one at lower price. (I think expertise know how to fix it as many want it). Now, dyson v10 works fine up to now.
Carpet & floor Rollers spin for 1 sec & stop in Eco mode v11 vaccum. Releasing the button & pressing it again does exactly the same. Whats this problem & where to check on the board. Can you make a detailed video about it & share.. thanks
Unfortunately, I have never encountered such a problem before.
What if V11 is pulsing, where to check on the motor or pcb? Thanks
You should check the motor driver mosfets and microprocessor.
@electronic7979
do you have the part number for the driver mosfets/ replaceable mosfets that will work on it? Thx
👍👋👋
thank you
👍
thank you
Dyson v10 can't work. Symptoms are as follows.
1. When connecting the charger, turn off after turning on 3 blue LEDs.
2. Remove the main body and battery and disassemble the battery. Press the battery switch and turn off 3 LEDs.
3. The battery's own voltage comes out well. Press the switch on the battery and the P+P- voltage comes out for a while and then it doesn't come out.
May I know if it's a battery problem or a body problem?
Iletisime gecebilirmiyiz ??
elektronikatolyem@gmail.com mail adresinden iletişime geçebiliriz.
My Dyson V10 Short capacitor I changed but still not working
Motor driver mosfets may be faulty.
TÜRKÇE dururken başka dil kullanmaya ne gerek var?
Malesef Türkçe içeriklere sponsor gelmiyor. Yakında Türkçe bir kanal açıp aynı içerikleri Türkçe olarak yayınlayacağım.
Pointless Video. Showed the motor removed and then replaced. Meter on the motor connections but no resistance values.
Hello. First of all, thank you for your comment. I think you didn't understand the video. The motor you see in the video works smoothly. I have shown the measurement values so that you can reference them on your own vacuum cleaner. subject of the video; Since the internal resistance of a good motor is low, it is normal for it to show zero ohms when measured with a multimeter.