Making Metal Signs- CNC Plasma Crossfire Pro
Vložit
- čas přidán 6. 03. 2021
- Please like, subscribe, or donate so we can keep this series going! If we can get large enough we will start doing more content! Subscribe - bit.ly/2HsmI20
Plasma Green 1050 bit.ly/3kWATxk
The green juice I recycle in my water table
Glowforge Discount Link (My Dream Laser Cutter) - glowforge.com/hacklab
Need a Product Designed? - hacklab.design
Any File or part (i.e a utility switch, micro-vibration part, etc) or any product sold on the hackLAB web site ships unassembled for inventors and is not intended to diagnose, treat, cure or prevent any human disease. Any statements made on sites or videos made from other inventors, bloggers, or CZcamsrs regarding the mentioned parts have not yet been evaluated by the United States Food and Drug Administration. Or to be it another way use the mentioned part at your own risk. The buyer assumes all liability for injury or unlikely death. This product is not intended to diagnose, treat, cure or prevent any disease - Context Communications LLC (dba hackLAB) . Always wear hearing, eye protection, or a helmet if necessary.
This content is intended for 18 yrs or older mature audiences and is for entertainment purposes only. All actions shown in this video are performed in a safe place using safety equipment and conducted by professionals. Do not try to recreate any devices or steps shown in this video anywhere.
Anything shown in this video is not intended for human-use, additionally, no Medical Device is being offered for sale nor plans. Seek professional help for any medical issues. Context Communications LLC (dba hackLAB) is not liable for your actions. Please always wear eye, brain, and hearing protection.
Sometimes watching a newbies video is the best way for a newbie to get all the answers-both from you and the pros in the comments in this case. Thanks for the vid!
Thank you bro. I just discovered you great channel yesterday only. It amazing.
It would be better to start your video with a greeting to viewers.
Thanks again.
That lead in and Lead out is where the torch does its pierce into cut and exiting the cut, and its the reason your sign has those small halfmoon circles on all the letters, (I'm sure you know that now) But for others that read this.
Is there anyway to eliminate those? I don’t know how to address some of these things cause I’m just getting started.
@hacklabryandewitt it's in the software, but think about it as the kerf of the blade always have your lead ins and outs start and stop in waste material. Not on the line itself.
@@hacklabdesign when I’m programming mine I measure out the smallest hole on the drawing and then make my lead in and lead out a tiny bit under that maybe just by .02 and at a 90 degree angle and when you have a big minimum size whole I lead at about .19!
If you place galvanized metal in vinegar for a few days, it will completely remove the galvanic coating with out using any abrasives. It’s known as pickling.
Wow, really. Thank you! Hoony
Great work !! Keep up the langmuir cross fire pro content !! I just got mine and I’m new to cnc plasma cutting ! This info helps !!
Ok
Where is the link for the "cut settings chart" spreadsheet? I could really use that
Thank you very much for such a great video👍👍👍 what type of air compressor do you use with the plasma table? Thank you
Love the upcycling of the metal from the trash. Zinc coating was my first thought when I saw the sign, good thing you've got someone bouncing good advice to you!
Thanks Mark
@@hacklabdesign
▪️
Hey, Are you aware of any US laws regarding what STYLE of sign people can't hold out in public sight? [In front of traffic for example].
I recently ordered a sign that is made of the same material of that of a street sign. So naturally, it looks MUCH like one
[It is rectangular, about 4ft×3ft] .
Before I made the choice to have it bought & shipped to me, I did look to see if there were any court rulings/laws about that type of thing. I didn't find anything about it, so I placed the order.
I understand you're not a lawyer - but before I go out with this sign in the near future - I thought I would run this by you - - -
Just to see if you had any valuable information for me to keep in mind along the way.
🟥
@@2NDFLB-CLERK zinc needs to be well ventilated , no issues reproducing shapes
@@hacklabdesign
▪️
So if it's a 4ft×3ft sign, and isn't well ventilated - then it's illegal to hold up in public sight ..?
🟥
Where can I get the spreadsheet from the video?
Wish you were beer.
Good sign
Ok , good adaptation
it would help to have a higher level of "water" when cutting, the splashing up on the metal will help with warping
Hi thanks for this great video, one question is fusion 360 a free program ?
You can get a limited personal license for free.