7 years I've been wondering why flint and steel looks the way it does in Minecraft. Now I know! What a cool skill - and thank you for such a clear and succinct video! :)
I've been watching bushcraft videos lately. I haven't done a lot of camping in my day but enough that I've gotten the taste for it. On a whim, I bought a flint and steel, and it arrived today. I just started chopping at it and watching the sparks fly, but then started searching on CZcams for an explainer video. This was very well explained, thank you
Thank you. I picked up a kit just yesterday and was moving the flint. Had a few sparks. Just watched you video and used your technique and am making spark showers now. Great video.
I have this uncanny knack for learning random skills and facts right before I end up needing them. I'm...concerned about why I'm going to need this skill.
Really good tutorial explaining the process. Thanks, I’ve struggled for a while. I also wasn’t aware quartz worked which is useful to know depending on your location. I’ve finally managed to light a fire with flint and char cloth thanks to this.
when i started this technique i was amazed how simple it is. many types of stones will work but chert and flint are the best. you should warn a beginner how easy it easy to lay open your hand on the flint.
Nicely done! Best, simplest explanation I've seen yet. Maybe next video.. finding/locating your flint, chert, quartz.. sizing it down.. putting sharp edges on them. :-) Finding rocks here that are harder than steel is is really difficult. If you do find one it's usually a transplant. Thanks for the video..
I bought a F/S kit after watching this. I couldn't believe how friggin easy it is. I was able to get an ember after 2 or 3 strikes the first time I used it. I enjoy using the F/S method so much I now use it to start the fire in my woodstove.
Nice basic intro. Agree on starting there with newbies. Percussion Fire Ignition (PFI) aka Flint (the rock) and (high carbon) Steel aka F&S is an amazing skill to learn. I point out PFI not only to differentiate between ferrocerium but also because merely using flint and steel is just scratching the surface. Iron pyrites, titanium, carbide steel, fish hooks, sharpening stones, bamboo, shovels, hundreds of types of quartzite rocks, saw blades, etc can all be used instead of, or with, flint and steel. Hundreds of plants and fungi can be charred for catching sparks. There are at least two dozen flora and fungi that will catch sparks in their uncharred state. If we pursue PFI beyond the basics we can learn hundreds of species of plants and trees, dozens of fungi, hundreds of types of rocks, dozens of types of metal and dozens of ordinary objects that can be used as improvised strikers... Amazingly each of these can be used successfully for F&S with knowledge and experience. Love your vids. Cheers!
yeah man, good one. I have lit a few fires with flint and steel but it was more by dumb luck than skill, now I have a better understanding of the movement needed, thanks.
Thanks for the demo, I had a rudimentary understanding but would take a hundred strikes to luck into a usable spark. After watching your explanation I have a full on flame in under a minute.
Your tip striking the rock with the striker in a semi circular motion really did the trick! I'm getting sparks consistently, albeit small ones. It's all about the rock, like you said! 👍🙂
depending on the size of your piece of "rock", if you lose the sharp edge it might be possible to chip off a small fracture and resharpen your rock. just be careful not to chip off too much
@@williamwhite9481 Sometimes it will Sometimes it won't. It depends on the structure of the stone. Especially when you have to use quartz with a bit of a grainy structure you'll loose the edge pretty fast. I often have to knapp a sharp edge on my stones, because the striker is dulling it out. I use the softer, not hardened end of the old broken file I use as a striker to knapp another sharp edge.
@@kongandbasses8732 yeah, you're right about that Is it okay to use the hardened side if a striker to Knapp a new edge? That's what I have been doing, it hasn't messed up the striker but that doesn't mean it wont mess it up over time. Do you know if its okay to do that?
@@williamwhite9481 I think it's ok to use the hardened part of the striker. It's just that I have the feel that the not hardened side does not slide off the stone blade that much, as the stone bites into the metal quite a bit. On the hardened part of the file the stone literally glides over the striker. So I just feel I have more control when knapping, using the non hardened part. Its the same with copper headed tools people use for knapping. Copper is even softer than the not hardened tang of my file. Its just me, just check out what's the best for you.
Learnt more in leads time than the kettle took to boil than I did off the last 20 clips I watched prior. Thank you for your direct and honest coaching buddy
I bought one of these yesterday at Daniel Boones fort in Boonesborough Kentucky. That place was really cool to visit, and chat with the blacksmith that makes these things the old way. Anyway thanks for this video! Helped me absolutely 👍🏻
Thanks for the video. We got a flint and steel kit from a blacksmith and my 9 year old has been at it for about 10 minutes. He got some sparks but has no idea how he did it lol
I tried this technique for fire lighting just last night with a friend just for fun, we wrapped some char cloth around the flint and like you said aimed for a sharp edge and the both of us were successful in producing flames within a minute and a half,, I expected it to be far more difficult
Awesome! By far the best and clearest instruction on using the flint and steel process. I have seen several videos by "experts" on the subject, yet they were not as informative as this video. BTW, none of the "experts" produced as many sparks as frequently as you did. One question that I have; when using the flint and steel method can charred camp fire wood be used in lieu of char cloth, chaga, lantern wick, or any other source?
Leftover wood from campfires can work. Most won't. Yet some has and does. Dan is on the right track in that most leftover wood will be over or under charred. Those won't work. One thing to look for is the solid type of charcoal very rarely works in my experience. Some of that is even tough to generate an ember in with a ferro! Most accidentally charred wood from old campfires will not catch sparks with F&S. What we are looking for in leftover campfire wood for use with F&S is the fine feathery type of charcoal. Often there is charcoal dust on the "feathers" (the dust catches sparks the best) so handle with care. Not every old campfire will have that. Intentionally charring always produces better results. However if we are caught without any useful char and can't locate or don't know any of the uncharred materials that will catch sparks in their uncharred state, a campfire is another place to look. As a side note, we can char by many methods using tins, non metal containers or even no container at all. Happy Trails!
Gent's, thanks for sharing your knowledge and experiences with me. In case you haven't caught on yet, I am new to bush crafting/survival techniques, even new to camping. My question derived from thinking "what if" and "where to" in the event i didn't have my ferro rods, steel and flint, char cloth, birch bark, jute twine, or any other natural or man made tinder. I'm just thinking and wish to be prepared. Again, thanks much!
I got this awesome new striker/belt buckle today. And I got my flint that came with it and this really good information just popped up. Coincidence, I think not.
to preserve the sharp edge on my rocks I prefer a 90 degree angle and a very delicate strike, I have also learned that you don't need to go hard on the stone and if you do go hard all you do is end up blunting the edge of your rocks. Plus slow down, going a bull at a gate doesn't solve anything.
Ive noticed a lot of tutorials show to strike straight down on the rocks edge with the steel... And the old method of striking the rock against the steel which works better. But you Sir have the best results and method. Thanks foe the video... I wonder what type of metal works best for spark, titanium is expensive and doesnt show much spark compared to the Steel versions.
7 years I've been wondering why flint and steel looks the way it does in Minecraft. Now I know! What a cool skill - and thank you for such a clear and succinct video! :)
I've been watching bushcraft videos lately. I haven't done a lot of camping in my day but enough that I've gotten the taste for it. On a whim, I bought a flint and steel, and it arrived today. I just started chopping at it and watching the sparks fly, but then started searching on CZcams for an explainer video. This was very well explained, thank you
Thanks alot for this video, really helped me on finishing up my home made portal to hell, really cool stuff!
This is the clearest explanation of flint & steel technique I've seen on CZcams. Many thanks.
thank you for taking us to school, Prof. Coalcracker. 3 minutes to 'splain what others cant or wont in 20+ minutes. ♡♡♡
Thank you. I picked up a kit just yesterday and was moving the flint. Had a few sparks. Just watched you video and used your technique and am making spark showers now. Great video.
Great to hear!!
Oh, now I see why the steel looks like a hook in minecraft
Yeh me to I always wondered why LolXD :)
I thought that hook a telephone
Lol
Lol that's literally why I came here. I thought the "C" shape was weird, but it makes sense in practice
@@jamesmorgan6831 I’m still wondering how you get a steel striker from crafting an iron ingot
“It’s so easy.. even a caveman can do it” lol awesome lesson today Dan
No
@macarioangel4749 shut up bro
I have this uncanny knack for learning random skills and facts right before I end up needing them.
I'm...concerned about why I'm going to need this skill.
Updated Request: were you stranded on a forest, or did you go to a medieval fair?
Really good tutorial explaining the process. Thanks, I’ve struggled for a while. I also wasn’t aware quartz worked which is useful to know depending on your location. I’ve finally managed to light a fire with flint and char cloth thanks to this.
when i started this technique i was amazed how simple it is. many types of stones will work but chert and flint are the best. you should warn a beginner how easy it easy to lay open your hand on the flint.
When your friend asks you how to make fire in minecraft.
My nephew sent me here.
LMAO
This is the best technique tutorial I have ever seen on this subject. Awesome video thanks!
Nicely done! Best, simplest explanation I've seen yet.
Maybe next video.. finding/locating your flint, chert, quartz.. sizing it down.. putting sharp edges on them. :-)
Finding rocks here that are harder than steel is is really difficult. If you do find one it's usually a transplant.
Thanks for the video..
Dan that is an excellent explanation on striking flint. I'm gonna make a striker...you have me fired up about this, pun intended!
I bought a F/S kit after watching this. I couldn't believe how friggin easy it is. I was able to get an ember after 2 or 3 strikes the first time I used it. I enjoy using the F/S method so much I now use it to start the fire in my woodstove.
Nice basic intro. Agree on starting there with newbies.
Percussion Fire Ignition (PFI) aka Flint (the rock) and (high carbon) Steel aka F&S is an amazing skill to learn. I point out PFI not only to differentiate between ferrocerium but also because merely using flint and steel is just scratching the surface.
Iron pyrites, titanium, carbide steel, fish hooks, sharpening stones, bamboo, shovels, hundreds of types of quartzite rocks, saw blades, etc can all be used instead of, or with, flint and steel. Hundreds of plants and fungi can be charred for catching sparks. There are at least two dozen flora and fungi that will catch sparks in their uncharred state.
If we pursue PFI beyond the basics we can learn hundreds of species of plants and trees, dozens of fungi, hundreds of types of rocks, dozens of types of metal and dozens of ordinary objects that can be used as improvised strikers... Amazingly each of these can be used successfully for F&S with knowledge and experience.
Love your vids. Cheers!
My brain ugh
yeah man, good one. I have lit a few fires with flint and steel but it was more by dumb luck than skill, now I have a better understanding of the movement needed, thanks.
Thanks for the demo, I had a rudimentary understanding but would take a hundred strikes to luck into a usable spark. After watching your explanation I have a full on flame in under a minute.
The best description of Flint and steel I have ever seen.
Your tip striking the rock with the striker in a semi circular motion really did the trick! I'm getting sparks consistently, albeit small ones. It's all about the rock, like you said! 👍🙂
grate way to explain that !
I see that
???
Yeh :)
Was that a pun?
Such a simple to the point video.
Thanks 👍🏻
depending on the size of your piece of "rock", if you lose the sharp edge it might be possible to chip off a small fracture and resharpen your rock. just be careful not to chip off too much
If its thin I think the striker will actually keep it sharp as its breaking the flakes.
@@williamwhite9481
Sometimes it will
Sometimes it won't.
It depends on the structure of the stone. Especially when you have to use quartz with a bit of a grainy structure you'll loose the edge pretty fast.
I often have to knapp a sharp edge on my stones, because the striker is dulling it out.
I use the softer, not hardened end of the old broken file I use as a striker to knapp another sharp edge.
@@kongandbasses8732 yeah, you're right about that
Is it okay to use the hardened side if a striker to Knapp a new edge? That's what I have been doing, it hasn't messed up the striker but that doesn't mean it wont mess it up over time. Do you know if its okay to do that?
@@williamwhite9481
I think it's ok to use the hardened part of the striker.
It's just that I have the feel that the not hardened side does not slide off the stone blade that much, as the stone bites into the metal quite a bit. On the hardened part of the file the stone literally glides over the striker. So I just feel I have more control when knapping, using the non hardened part.
Its the same with copper headed tools people use for knapping. Copper is even softer than the not hardened tang of my file.
Its just me, just check out what's the best for you.
Learnt more in leads time than the kettle took to boil than I did off the last 20 clips I watched prior. Thank you for your direct and honest coaching buddy
Thank you! Clear directions. Plus, the explanation of why and how this works is super helpful. Many thanks!
Wow! You've got excellent teaching skills. Thank you!
Thank you very much Sir! I just got my Hudson bay steel, didn't know the proper strike technique. Know I got sparks.
I just got a flint and steel kit so that was super helpful. Thanks
I bought one of these yesterday at Daniel Boones fort in Boonesborough Kentucky. That place was really cool to visit, and chat with the blacksmith that makes these things the old way.
Anyway thanks for this video! Helped me absolutely 👍🏻
Ive been there
Hah, easy, just right-click.
LOL
@@Olga-pu6lw ...okay?
@@idonotusethisaccount.9958 oh shit i changed my name
@@idonotusethisaccount.9958 i shall DELETE my comment!
Hahaha😂😂
This helped me understand why the angle of the frizzen is such in a flintlock gun, awesome.
Best explanation I’ve EVER heard!!! Thanks Dan!
Newbie here, thanks for the education!
That worked amazing for me. The 45° angle was the trick.Thanks again.
Thanks for the video. We got a flint and steel kit from a blacksmith and my 9 year old has been at it for about 10 minutes. He got some sparks but has no idea how he did it lol
Started playing D and D and had to figure out how to start a fire. Thank you! I will share it with the crew.
Or make your own steel from an old file. On and don’t forget the char cloth. Great job as always!
Thank you Dan, very well done 👍. Got it!
Thanks for the simplified explanation! Now I know why I've been breaking the flint.
how steve do this with 1 hand?
Lukas Gabriel he’s a pro hunter
That would be the third leg technique, not advised for beginners.
Do not question the sacred one.
finger strength
Fantastic information and demonstration. Thank you!
1000 videos on flint striking, & this one beats them all in 3½ minutes.
Hey friend!!!!excellent advice there!!!!..I hand made my kit and it works great!!!keep the videos coming!!!!
I tried this technique for fire lighting just last night with a friend just for fun, we wrapped some char cloth around the flint and like you said aimed for a sharp edge and the both of us were successful in producing flames within a minute and a half,, I expected it to be far more difficult
Good information and technique for flint and steel fire making.
Excellent lesson! Well presented!
Thanks for the tips, now I feel prepared to beat up some ghasts and blazes! ❤️
thats really interesting and educational, thank you
finaly someone who teaches good stuff
thanks for the lesson Dan very awesome video
Best flint and steel tutorial ever.
Great video! Just getting into flint and steel, and I appreciate the video. Thank you!
got me a couple tiny sparks straight away with this technique! ❤
Thanks that was informative!! I need to try this style some more!
Holy moly that helps a whole bunch thank you so much
Thanks. While I have never done this I thought it was the flint rock being chipped that caused the ember and not the striker. Interesting.
Dave
Great info thanks for posting 👍
I really enjoy your videos. I'm gonna order a flint and steel kit.
Beautiful video, watch and learn kids!
Great explanation, thanks
I’m a blacksmith and I’ve made flint strikers but my techniques sucked haha. This helped a ton
Well done Dan!
Great explanation.
Newbie here. Good video. Very helpful.
Great video!
Awesome video as always my friend 😇
Thanks for the video!
A hole punch is a great way to create an edge out of flint. Way easier than traditional knapping.
Awesome! By far the best and clearest instruction on using the flint and steel process. I have seen several videos by "experts" on the subject, yet they were not as informative as this video. BTW, none of the "experts" produced as many sparks as frequently as you did.
One question that I have; when using the flint and steel method can charred camp fire wood be used in lieu of char cloth, chaga, lantern wick, or any other source?
Charred Camp firewood is charcoal and it won’t work. You can make natural char from sometime called punk wood
Leftover wood from campfires can work. Most won't. Yet some has and does.
Dan is on the right track in that most leftover wood will be over or under charred. Those won't work. One thing to look for is the solid type of charcoal very rarely works in my experience. Some of that is even tough to generate an ember in with a ferro! Most accidentally charred wood from old campfires will not catch sparks with F&S.
What we are looking for in leftover campfire wood for use with F&S is the fine feathery type of charcoal. Often there is charcoal dust on the "feathers" (the dust catches sparks the best) so handle with care. Not every old campfire will have that.
Intentionally charring always produces better results. However if we are caught without any useful char and can't locate or don't know any of the uncharred materials that will catch sparks in their uncharred state, a campfire is another place to look. As a side note, we can char by many methods using tins, non metal containers or even no container at all.
Happy Trails!
Gent's, thanks for sharing your knowledge and experiences with me. In case you haven't caught on yet, I am new to bush crafting/survival techniques, even new to camping. My question derived from thinking "what if" and "where to" in the event i didn't have my ferro rods, steel and flint, char cloth, birch bark, jute twine, or any other natural or man made tinder. I'm just thinking and wish to be prepared. Again, thanks much!
Best explanation on here thank you!!! 🙏
I got this awesome new striker/belt buckle today. And I got my flint that came with it and this really good information just popped up. Coincidence, I think not.
Spot on man. Great video.
Good tip! Thanks!
Thanks! Hoping Santa brings me a striker in my stocking😊
Very helpful! ❤thank you for doing this!
Thank you for this man!
This is a really great tutorial. Thank you!
Beautifully explained, nice video!
Thanks man amazing video
Awesome, thanks!
Excellent job
Most spark by far
Simply brilliant (again) ATB
Really helpful!!
Excellent tutorial!
to preserve the sharp edge on my rocks I prefer a 90 degree angle and a very delicate strike, I have also learned that you don't need to go hard on the stone and if you do go hard all you do is end up blunting the edge of your rocks.
Plus slow down, going a bull at a gate doesn't solve anything.
I hit the rock onto the striker. It makes the sparks drop downward into my char cloth and birds nest; as opposed to flying up into the air.
Ive noticed a lot of tutorials show to strike straight down on the rocks edge with the steel... And the old method of striking the rock against the steel which works better. But you Sir have the best results and method. Thanks foe the video... I wonder what type of metal works best for spark, titanium is expensive and doesnt show much spark compared to the Steel versions.
bro you can just tell to right click, why you did this much of hard work on making this video. :D
Thank you for the Info
You know we’ve failed as a species when the only reason I’m watching this video is to get reference for minecraft manhunt fan art
OMG IM USING THIS TO ANIMATE NIKKI
@@Clown_Sydney dude I’d love to see that, is it gonna be on your channel or do you have a Twitter I can follow?
Very helpful! Thanks!👍
Thanks for the physics lesson. I had been wondering how the sparks got directed into the char cloth on top of the flint. Again thanks.
Excellent video - thanks
You can also knap the flint to have a razor edge.
Outstanding!!!!!!
Awesome thanks
thankyou, finally i can activate my portal
make sure you have some gravels and iron ore first
Thanks for the tips on the angle.
Another question, would it help to dress the steel edge every once in a while ?
I never do anything with my steels