This is the second home in which czcams.com/users/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU we've replaced our "regular" doorbell with a Ring video doorbell and we really enjoy it. It is very easy to install and it works very well, with a clear picture through the app and good in-home use (we added the chime, which is also easy to install and doesn't require another thought to use).
I'm a 78 yr old woman who loves a challenge and doing things myself! Thanks to your wonderful instructions I installed this deadbolt with very few redos! The only issue was the screws in the box were not numbered the same as listed on instructions. It took a little longer to figure out which one to use. But, it's installed and working perfectectlyl. Best part is I did it myself!
This is one of the best massages I ever read. Mrs. Gloria, I am feel absolutely impress at your persistence and humble that my video help you. People contact me for help all the time, feel free to do the same. Thank you for this massage Mrs Gloria.
I would like to pass this to all of you. Recently, and for the first time after 3 years having this lock, I had electronics problems with it. I replace the batteries and nothing, then I though the configuration was screw up, so I reconfigure and still nothing. So finally I try to reset the lock and that did it. You know, the part where you hold the black button in the back while pressing and holding the lock button in the from where the number digits are at. Well, after doing that and watching the lock or bolt in this case move back and forward several time. After that I game it a new set of combination number lock and that did it. If you ever get this problem I hope this will and can help you. Thank you for all your comments.
Is my pleasure, I am glad I have been able to help many. When I bought mine I went through so much headache and I only thought of people like you and many like me. The worst was to set up of the lock where I had to call the company many time to give you the last and most important piece of the puzzle setup. I hope you enjoy this lock like I have. I know is expensive but is definitely worth it.
great video. very informative and I learned so much. I was going to pay a lock smith to come out and install it, but after watching this video I am confident in doing it myself.
Thank you for your comment. I hope that you benefited from it. Please check my other videos if you can and Subscribe. Comment if you have any question. Thank you again.
Yes, of course. There had times already when the batteries are almost dead so I will use the key to open the lock because is opening with very little force. Also, when you buy cheap batteries they last about 2 to 3 months so use Duracell batteries as they last much, much longer. I have calculated about 8 to 9 month and this while four people living in the house have gotten use to the code other than their keys. So I bought a lock box where I mounted outside the property and as an emergency in case the lock goes bad or batteries die. Needles to say after owning this lock for more than a year now, we have never use the emergency spare key.
I love this comment. I went to a lot of trouble to get that last part and the moment I got it I knew I needed to share it will everybody, I try to make my video about that. Thank you for this comment.
Hey, great video. Thanks for posting. I am having a problem with the "door handing procedure". The important step you said not to forget. After dozens of attempts, I still can't get the thing to do the automatic calibration. Any thoughts?
I know, the most important step. Step1. Take out the 4 battery pack from the slot in the back of the lock. Step2. Press and hold the lock icon top button in the front of the lock. Step3. While holding and pressing the icon figure button in the front, re-insert the 4 battery pack, back into the slot of the back section lock. As soon as you do this the bolt that lock the door will move in and out of the lock chamber as it is resetting itself for proper use. I bought 4 other locks for a several friends and they worked the same way with no problems. Considere you lock could be defective. I hope this help. Good luck.
Hello,the first button from the left in the back of your panel is a switch and if you push it to the up position the LED light will start lighting every 6 seconds. Now if your device does not do that then your device is damage since I encounter that with one of my friend purchase. I hope that help and thanks for your question. Please subscribe if you can.
I new about the little switches in the front, I was talking about the actual number pad. I did find out, I have to hit the lock button first then enter the code and they numbers will be lit. Thank you for your information.
I am about to change batteries and I don't think my husband set ours up to lock by itself. If I do that will it mess up the codes already set? I am so glad I found you as I cannot find the directions!! Grr.. You are awesome and yes I subscribed!
No, The code will remain in memory. Don't worry, I change the batteries every 4 month since my kids don't even want to use the keys anymore. I suggest you use Duracell batteries. Again, don't worry and have nice day.
Thank you for your video. I followed important step and it’s working. But when I press buttons the light is red not green. Is that supposed to be green light ? Thank you
Is RED when is clear and GREEN when is ready. Clear as to try again and ready means as you fail many times it locked and won't work for 10 seconds and you need to wait for the green or ready light. Thank you for your comment. Please subscribe.
Back to you FRIEND!. I spent several hours huffing and puffing this gadget myself and I only kept thinking about all those good people like yourself and others that will go through the same trouble. To shorten the story, I made the video for all of you. Thank you again.
I can help you, Channel with no name. It's just branding like Sony and Panasonic that they both do the same thing but one is advertise more than the other. I still have my lock and I haven't had any problems or have I encounter any. Maybe I'll change the batteries at one point but so far is has been 8 month and the batteries are find. I hope this answer you question. Good luck.
Orelius thanks for the battery info. After seeing the pros and cons and them demonstrating how you can break into it, I decided to return it to the store. I have a resortlock one that uses schlage inners and will probably use that. My door only has one lock on it so I would feel safer if the deadbolt had a secondary of some sort.
hey man. I received a used one from someone. The only problem is that I am missing some bolts. Can you let me know what size they are so I can go buy them at home depot?
I have 2 problems, 1) the number 2 button on the back, it cycles every 30 secs while the door is locked and won't stop, is the normal? Sounds very annoying. 2) I have followed direction to a tee and I can not get my master code to program. I watch the stupid video from the company and they must of left something out.
That is not how it's suppose to work. Sound like you have a bad unit. In my video I show you how you can turn those bottoms off because I know you are right when the light and the sounds are very annoying I even say that as well in the video. But your problem when your unit I have not encounter it with mine. Good luck.
I understand about my video I am not the best editor but that will not stop me from helping you . Which code do you mean. The password code or the configuration code., please explain.
Maybe I can help. The large bottom needs to be hold for a few seconds and enter a code. You don't have to hold the large top bottom in the back; just press it for a few seconds and then release and now enter a code. If you set it to less than 5 digits it will not work. I set my on 8 digits and then press the lock bottom. Try that and it should work. Good luck
BRIEF COMMENT: IN MY OPINION, IF YOUR GOING TO CHANGE THE LOCKS IN YOUR HOME, STAY W/ONLY THE SOMEWHAT STRONGER-BETTER BRANDS IN THIS ORDER: SCHLAGE; BRINKS OR.
I am not an edit by far. But If you have read some of the comments you will see that my useless video has help a lot of people. I don't get by anyone but complements in knowing I was able to help is enough for me. But don't get me wrong I wish this video was to your liking but since it isn't and I can't make a good video like you say maybe instead of you insulting my channel would instead help me making a better video. Please do not make any more comments to my channel.
This is the second home in which czcams.com/users/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU we've replaced our "regular" doorbell with a Ring video doorbell and we really enjoy it. It is very easy to install and it works very well, with a clear picture through the app and good in-home use (we added the chime, which is also easy to install and doesn't require another thought to use).
I'm a 78 yr old woman who loves a challenge and doing things myself! Thanks to your wonderful instructions I installed this deadbolt with very few redos! The only issue was the screws in the box were not numbered the same as listed on instructions. It took a little longer to figure out which one to use. But, it's installed and working perfectectlyl. Best part is I did it myself!
This is one of the best massages I ever read. Mrs. Gloria, I am feel absolutely impress at your persistence and humble that my video help you. People contact me for help all the time, feel free to do the same. Thank you for this massage Mrs Gloria.
I would like to pass this to all of you. Recently, and for the first time after 3 years having this lock, I had electronics problems with it. I replace the batteries and nothing, then I though the configuration was screw up, so I reconfigure and still nothing. So finally I try to reset the lock and that did it. You know, the part where you hold the black button in the back while pressing and holding the lock button in the from where the number digits are at. Well, after doing that and watching the lock or bolt in this case move back and forward several time. After that I game it a new set of combination number lock and that did it. If you ever get this problem I hope this will and can help you. Thank you for all your comments.
Thanks in advance
@@swarpharmd1 appreciate your comment. Thank you.
Thanks for advice!
Thanks for your demonstration. With the help of your video I installed the same lock in my house with no complication.
You're welcome, It pleases me to hear comments like that and I appreciate it.
Good video señor!!! 👍 I m ready for the installation of my smartcode 913
Thank you so much for the last part with the battery pack. I was about to say the hell with it. Now my code is set.
I just bought one of these locks today and your instructional video was very helpful. Thanks.
Is my pleasure, I am glad I have been able to help many. When I bought mine I went through so much headache and I only thought of people like you and many like me. The worst was to set up of the lock where I had to call the company many time to give you the last and most important piece of the puzzle setup. I hope you enjoy this lock like I have. I know is expensive but is definitely worth it.
great video. very informative and I learned so much. I was going to pay a lock smith to come out and install it, but after watching this video I am confident in doing it myself.
Thank you for your comment.
Thanks for sharing your video very helpful
The last thing it's so important. Thank you
Good stuff, Thanksgiving I lost the directions, I was a wreck thank you Orelius-BRAVO
Thank you, I appreciate your comment and I am please I was able to help. Good luck and Happy New Year.
If the battery died, will I be able to use my key to unlock the door bolt? Please let me know. I have the same brand as yours.
Thank you for this. God bless
Thank you for your comment, I really appreciate people like you that took advantage of the video. Thank you again. God bless you back.
Thank you for your views. I will be uploading more material soon.
I really wish that u would have shown how to program
Because of this comment I'll considered making a video on that subject only Thank you for your comment.
Thanks for uploading the video!
Thank you for your comment. I hope that you benefited from it. Please check my other videos if you can and Subscribe. Comment if you have any question. Thank you again.
Thank you my my friend. God bless ya!
Yes, of course. There had times already when the batteries are almost dead so I will use the key to open the lock because is opening with very little force. Also, when you buy cheap batteries they last about 2 to 3 months so use Duracell batteries as they last much, much longer. I have calculated about 8 to 9 month and this while four people living in the house have gotten use to the code other than their keys. So I bought a lock box where I mounted outside the property and as an emergency in case the lock goes bad or batteries die. Needles to say after owning this lock for more than a year now, we have never use the emergency spare key.
OH YOU ARE AWESOME!! Thank you for this video and especially the most important part to not forget.
I love this comment. I went to a lot of trouble to get that last part and the moment I got it I knew I needed to share it will everybody, I try to make my video about that. Thank you for this comment.
Nice video. Works great
Hey, great video. Thanks for posting. I am having a problem with the "door handing procedure". The important step you said not to forget. After dozens of attempts, I still can't get the thing to do the automatic calibration. Any thoughts?
I know, the most important step. Step1. Take out the 4 battery pack from the slot in the back of the lock. Step2. Press and hold the lock icon top button in the front of the lock. Step3. While holding and pressing the icon figure button in the front, re-insert the 4 battery pack, back into the slot of the back section lock. As soon as you do this the bolt that lock the door will move in and out of the lock chamber as it is resetting itself for proper use. I bought 4 other locks for a several friends and they worked the same way with no problems. Considere you lock could be defective. I hope this help. Good luck.
You are missing a vital step of how to set the codes.
That was easy! Thanks!
Thank you Kim. I appreciate your comment.
Thank you man! So much! You cleared my frustration Jajajajaja
Thank you for help
Thank you 🙏
Good info!
Great video but, how do you turn on the back light? I installed this same lock a couple of days ago but when you touch the pad it won't light up.
Hello,the first button from the left in the back of your panel is a switch and if you push it to the up position the LED light will start lighting every 6 seconds. Now if your device does not do that then your device is damage since I encounter that with one of my friend purchase. I hope that help and thanks for your question. Please subscribe if you can.
I new about the little switches in the front, I was talking about the actual number pad. I did find out, I have to hit the lock button first then enter the code and they numbers will be lit.
Thank you for your information.
Sorry about that. Your right. Please feel free for any questions. Thanks
I am about to change batteries and I don't think my husband set ours up to lock by itself. If I do that will it mess up the codes already set? I am so glad I found you as I cannot find the directions!! Grr.. You are awesome and yes I subscribed!
No, The code will remain in memory. Don't worry, I change the batteries every 4 month since my kids don't even want to use the keys anymore. I suggest you use Duracell batteries. Again, don't worry and have nice day.
s7d5.scene7.com/is/content/BDHHI/913-installation-user
Ìnstallation user guide
Ty so much
On mine I also can lock from my phone
Still does not work. When I press the user code, the red light flashes not allowing me to add the user code...
You need to scrap this video and replace it with one showing how to program the lock.
Thank you for your video. I followed important step and it’s working. But when I press buttons the light is red not green. Is that supposed to be green light ? Thank you
Is RED when is clear and GREEN when is ready. Clear as to try again and ready means as you fail many times it locked and won't work for 10 seconds and you need to wait for the green or ready light. Thank you for your comment. Please subscribe.
Orelius I’m sorry just now see your answer. It’s working but keypad will be red instead of green. I guess it’s ok right ? Thank you
Is suppose to be like that. Is only green when you reset the number keys as they take too long set back into active. Hope that help.
Thank you so much again. Have a great day.
Thumbs up for you my friend! I spent 2 days trying to figure out why this wouldn't lock properly.
Back to you FRIEND!. I spent several hours huffing and puffing this gadget myself and I only kept thinking about all those good people like yourself and others that will go through the same trouble. To shorten the story, I made the video for all of you. Thank you again.
My husband finally learned
Good, People usually have problem with the last part which is the configuration. I'm glad you got it.
Informative but how safe is this lock? Most of the videos here say kwikset is weak compared to Schlage
I can help you, Channel with no name. It's just branding like Sony and Panasonic that they both do the same thing but one is advertise more than the other. I still have my lock and I haven't had any problems or have I encounter any. Maybe I'll change the batteries at one point but so far is has been 8 month and the batteries are find. I hope this answer you question. Good luck.
Orelius thanks for the battery info. After seeing the pros and cons and them demonstrating how you can break into it, I decided to return it to the store. I have a resortlock one that uses schlage inners and will probably use that. My door only has one lock on it so I would feel safer if the deadbolt had a secondary of some sort.
After reviewing the Schlage I also find it very useful indeed. I appreciate your question and I wish you luck with your lock. Thank you.
hey man. I received a used one from someone. The only problem is that I am missing some bolts. Can you let me know what size they are so I can go buy them at home depot?
pretty much the size of the screws
How can I change the code?delete my old code
I have 2 problems, 1) the number 2 button on the back, it cycles every 30 secs while the door is locked and won't stop, is the normal? Sounds very annoying. 2) I have followed direction to a tee and I can not get my master code to program. I watch the stupid video from the company and they must of left something out.
That is not how it's suppose to work. Sound like you have a bad unit. In my video I show you how you can turn those bottoms off because I know you are right when the light and the sounds are very annoying I even say that as well in the video. But your problem when your unit I have not encounter it with mine. Good luck.
The video was very informative but you didn’t show how to program the codes
I understand about my video I am not the best editor but that will not stop me from helping you . Which code do you mean. The password code or the configuration code., please explain.
I can’t seem to set the code. I’ve been attempting for several hours.
Maybe I can help. The large bottom needs to be hold for a few seconds and enter a code. You don't have to hold the large top bottom in the back; just press it for a few seconds and then release and now enter a code. If you set it to less than 5 digits it will not work. I set my on 8 digits and then press the lock bottom. Try that and it should work. Good luck
Please let me know if you succeeded doing it. Thanks
The large button?
I press the circle button in the back. Enter a code then press lock. It flashes red
Did you get it fix? If not let me know and I will like to make a video specifically for issue and try to submitted by this afternoon.
BRIEF COMMENT: IN MY OPINION, IF YOUR GOING TO CHANGE THE LOCKS IN YOUR HOME, STAY W/ONLY THE SOMEWHAT STRONGER-BETTER BRANDS IN THIS ORDER: SCHLAGE; BRINKS OR.
Good instructions but the video is unwatchable.
Rambling - no install info
If you shake the camera just a little more and jump around, it should made this video completely useless..
I am not an edit by far. But If you have read some of the comments you will see that my useless video has help a lot of people. I don't get by anyone but complements in knowing I was able to help is enough for me. But don't get me wrong I wish this video was to your liking but since it isn't and I can't make a good video like you say maybe instead of you insulting my channel would instead help me making a better video. Please do not make any more comments to my channel.