I made a mistake... Lowering my KW V2 Suspension on my Mini Cooper S | KiaraShifts
Vložit
- čas přidán 4. 08. 2023
- Part of working on your own car is to make mistakes! In this video you will see me make an epic mistake while lowering the #KW #suspension on my #Mini #CooperS.
MUSIC
Local Forecast (Slower) - Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/
SOCIAL MEDIA
www.kiara.at
/ kiarashifts
Consider subscribing :) - Auta a dopravní prostředky
did a great job on lowering, kw is really a great choice
Thank you Nikola :)
Thank you for posting this. I agree with your take on this. KW should give an indication. Bilstein includes this information in their coilover kits.
Cool
You did a great job , i think if you add wheel spacers ,maybe it will solve this issue
Yep, had the same issue with mine. A lot of the coil-over manufacturers will note that you may need to run a spacer, so I'm surprised that KW didn't. Best of luck finding suitable wheels.
I felt like such an idiot! Didn't even consider this a potential issue. Rather than running spacers I wish KW would tell us which wheel specs we need..
How do you adjust the rebound on the rear dampers?
great job, spacer should solve the issue
Hey! you can use a spacer on the wheel and get your clearance, if you do not want to change your wheel.
Hey, thanks for the comment :) As mentioned in another comment, spacers affect performance and are almost impossible to legalise in Austria anyways. So I am going to get new wheels, probably ET37!
Love your voice !
Thank you!
You are beautyful, thx
Yep dont go on spacers, definitely not recommended, vibrations on high speed and unsafe, better go with a lower ET wheels and problem solved...
wheel name please
These are Dotz Rapier 17inch :)
@@KiaraShifts thank you
You need spacers too.
Thanks for the thought! However, I won't get spacers as they affect performance. It's also illegal in my country to have the wheel sticking out further than the fender! Laws are strict here 😅
Et35 with a 7. 1/2nch wide rim will be perfect
Thank you! Do you know if Et35 will stick out from the fender? Some friends of mine say the limit is 42, others say 37 but at that point the rims stick out past the fender 🧐
@@KiaraShifts I don't know if you have solved this matter, but if you are still on it i can send you a photo of stock MY'12 wheels with 12mm spacers to see how close they are to the fender.
@@KiaraShiftsswitzerland i see
I would subscribe but this is a ad magnet channel
You could use an adblocker? CZcams has increased ads for any channel, there is nothing I can do about it :(