Tips and Tricks for Inletting the Patch Box on a Golden Age Flintlock Muzzle Loader
Vložit
- čas přidán 8. 09. 2024
- With our patchbox lid formed, it's time to finish the inletting for the rest of our patchbox hardware. Most of this video covers inletting the fins or side plates of the patch box. There is a lot of detail in these parts, inletting them takes time and patience.
In the video I show you how to fix the level of your inlet with a simple piece of paper.
I've made all of these patchbox parts from standard sheet brass. None of these patchbox parts are casts or purchased. I've made them based on an original by Isaac Haines. To see how I've formed the domed patchbox, check out the video on my channel.
Be sure to like and subscribe if you'd like to get more videos from us in the future.
Free Carving Patterns- mailchi.mp/55a...
Iron Ram Forge is a blacksmith shop run by father and son pair Mike and Ethan Yazel. The duo operates out of their dual story workshop they built together on the family farm. In the basement they work in the hot shop with metal and glass, on the second story they work with wood to make carvings and furniture as well as fine hand engraving for jewelery and historic accoutrements.
Follow us online
anchor.fm/iron...
bit.ly/IRFEtsy
bit.ly/IRFinsta
bit.ly/IRFfacebook
Just amazing work !!😱 My god you have patience and have a good carving hand 👏👍🏼🇨🇦
Thank you so much 😀
❤
Why weaken the stalk? Do you ever use a patch box?
Do you have a video on how you made the top of that patch box with the silver daisy? Are they silver soldered together with a piece on the bottom to hold together?
I don't have a video on that part, but you are correct, they are soldered from the bottom.