This was extremely helpful. It worked!!!! I had to write the steps down as I found the video went too quickly for me. But all my remotes are up and working effectively now.
I gotta tell you. THANK YOU THANK YOU THANK YOU!!! I was on the phone with Xfinity for almost 2hrs //// they had no idea what they were doing / and couldn’t help me at all. After doing your video// I got my soundbar working !!!!!!!! I can’t thank u enough. 👍🏼🙏🏼👍🏼🙏🏼👍🏼🙏🏼💫💫💫💫💫 For the record// it’s a Yamaha soundbar U saved me dude ! Thanks !!!!! ** And for anyone that doesn’t understand or think it’s too fast/ just use common sense/ and pause at each step// or write down what he says. It’s only a .56sec video. I wish I found this before troubleshooting on the phone with Xfinity for over an hour. And they told me they didn’t know what to do, and they were gonna send me a new remote. (Fools,,, cause this video helped and I’m 💯 ALL GOOD) Thanks again 🎉
Thank you for this video! I had to exchange my cable box today as it was stuck in boot mode. Xfinity said that the new box would be "plug and play"...It took me some time to get the new remote to pair with my Samsung tv but i could not control the soundbar at all. After watching your video I had the soundbar under control in minutes! Thanks again!
Worked perfectly. For me (Bose Soundbar), it was 29 up clicks on the channel button. Note that, for the Bose, it is easier to tell exactly when it goes off and if the volume is working if you have the Bose iPhone app. You can see it click off and see changes in the volume. Thank you!!
Make sure your pointing remote directly at the receiver when trying to power it on or off. There maybe an infrared section on that type of receiver your remote needs to point it.
Now that you know it’s 80 pushes in, you can ch. down instead of up to find your code faster if you ever have to do it again. Btw. If you don’t mind sharing, what brand device do you have? I’m sure our viewers would love to know. Also thanks for the comment!😁
It won’t change the channels of your tv with the remote. The Xfinity remote is NOT a universal remote. It’s only capable of turning on and off your devices or switching inputs. Its main use is for the Xfinity cable box
Didn’t work for Samsung sound bar?went through all the scenarios but sound bar automatically turned back on every time and volume control was not there
How is your soundbar connected to your television? Bluetooth, HDMI or optical? Note: Only use one of these connections depending on your type of soundbar and tv or cable box.
With your sound bar already on We’re going to pair your Xfinity remote with your sound bar. Step 1 Hold down to A&D buttons until the light turns green Step 2 press 9-9-2 Step 3 Channel up slowly until sound bar or audio receiver cuts off Step 4 Press the center (OK/Select) button to lock the code in. That’s it! Turn your sound bar or audio receiver back on and test your volume. (I recommend having the volume of your TV down to zero to avoid echoing effect.) If, by chance your volume does not work on your sound bar start over. Accept for in step 3 when the sound bar cut off continue to press the volume button until the sound bar cuts back on. This method will cycle through different codes that allows the remote to connect to certain compatible device brands and models. Step 4 Press the center (OK/Select) button to lock the code in. ***Tip*** For some uncommon or offbrand models, it may be easier to find your code by channeling down instead of up. Take your time and channel like each second of a clock, if, by chance, you overthrow it just channel in the opposite direction until device responds. Then press (OK/Select) to lock that specific code in.
This was extremely helpful. It worked!!!! I had to write the steps down as I found the video went too quickly for me. But all my remotes are up and working effectively now.
Wow the most plain and painless instructions ever. Less than 2-minute set up. And I've done this multiples- the best of them all
this video saved me a ton of frustration. Thanks for being straight to the point, Love the sound effects and graphics.
Thank you. Took some patience, but was WAY faster than the 30 minutes I wasted with Xfinity customer! support.
I gotta tell you. THANK YOU THANK YOU THANK YOU!!!
I was on the phone with Xfinity for almost 2hrs //// they had no idea what they were doing / and couldn’t help me at all.
After doing your video// I got my soundbar working !!!!!!!!
I can’t thank u enough. 👍🏼🙏🏼👍🏼🙏🏼👍🏼🙏🏼💫💫💫💫💫
For the record// it’s a Yamaha soundbar
U saved me dude ! Thanks !!!!!
**
And for anyone that doesn’t understand or think it’s too fast/ just use common sense/ and pause at each step// or write down what he says. It’s only a .56sec video.
I wish I found this before troubleshooting on the phone with Xfinity for over an hour. And they told me they didn’t know what to do, and they were gonna send me a new remote. (Fools,,, cause this video helped and I’m 💯 ALL GOOD)
Thanks again 🎉
You’re very welcome! Glad it help
Thanks for commenting on your experience! I’m so glad it worked out for you
@@CableGods thank u.
-
Is it possible to pair the XR11 remote to the new box also? - and be able to control my box with both remotes ?
Yes hold setup button until light turns green press 9+8+7. Press volume button then follow instructions on tv screen
@@CableGods once again., ur the man!!!! Worked out all good 👍🏼 🙏🏼🙏🏼
Thank you for this video! I had to exchange my cable box today as it was stuck in boot mode. Xfinity said that the new box would be "plug and play"...It took me some time to get the new remote to pair with my Samsung tv but i could not control the soundbar at all. After watching your video I had the soundbar under control in minutes! Thanks again!
Worked perfectly. For me (Bose Soundbar), it was 29 up clicks on the channel button. Note that, for the Bose, it is easier to tell exactly when it goes off and if the volume is working if you have the Bose iPhone app. You can see it click off and see changes in the volume. Thank you!!
This was very helpful in setting up my parent's new TV and soundbar. Thanks.
Thank you I have been suffering with this for a month when it became un-paired YOU ARE AWESOME I will subscribe!!!
It worked with an old Yamaha 7.1 Receiver. However, on /off button does not work. So far volume works which is my first priority. Thank you!
Make sure your pointing remote directly at the receiver when trying to power it on or off. There maybe an infrared section on that type of receiver your remote needs to point it.
Thank you GOAT 🎉
Thank you so much!! Very helpful more more then Bose or Xfinity!
This worked!! I have a Sony soundbar. Thanks so much. ☺️
Thank you so much. Worked great on my Denon.
Nailed it! Wasn't the 1st code. Thanks for the complete instructions.
You are a remote control rockstar! Thank you!
Wow, thanks!
Thank you very much. It worked like magic. :)
Thank you!! Took 70 or so clicks up but it worked
Thank you. Worked perfectly
That worked with my Onkyo receiver. Thank you my friend
IT WORKED THANK YOU!!
You’re fantastic. Thank you.
❤❤❤❤❤❤❤
Great voice : )) & instruction too! Ty
Thanks!!! This is awesome!
Thank you for your video 😄
Worked great, thanks!
Worked perfectly
Holy shit it worked lol thank youuu
Thanks worked first try
Glad I could help
Excellent.. thanks
Thanks for this 🤙
Patience is the key. But it works.
Thank you!
Thanks my man.
Took about 50 clicks on the channel up button after putting in the 992 code but then, it worked! Thanks!
What kind of audio receiver do you have?
Could you go a little faster
Use the setting to slow it down. 🤦🏾♀️
It worked on my onkyo receiver.
Had to push ch. up about 80 times so be patient, it works!
Now that you know it’s 80 pushes in, you can ch. down instead of up to find your code faster if you ever have to do it again. Btw. If you don’t mind sharing, what brand device do you have? I’m sure our viewers would love to know. Also thanks for the comment!😁
Chanel up 28 times for the Bose sound bar, thank you !
Thanks I was trying to fix the issue where it says remote not found for my daf
Killer. Thanks.
Awesome! This saved me so much time. Thanks man!
Slow down professor! Lol
how do I pair my Xfinity remote to the channel bar? I cant change the channels for my emerson tv with the remote.
It won’t change the channels of your tv with the remote. The Xfinity remote is NOT a universal remote. It’s only capable of turning on and off your devices or switching inputs. Its main use is for the Xfinity cable box
What a pain in the ass process you seemed to made so simple
Didn’t work for Samsung sound bar?went through all the scenarios but sound bar automatically turned back on every time and volume control was not there
How is your soundbar connected to your television? Bluetooth, HDMI or optical? Note: Only use one of these connections depending on your type of soundbar and tv or cable box.
Where do you get the code I have a LG sound bar and this is not working for me
Do you have a Xfinity cable box? That’s the only way you can pair remote by code
Anyone get this to work for the Monoprice SB300?
I’m confused, are you repeating?
Nope not repeating at all. All videos are showing u different steps to solve your remote issues. What issue are u having?
I can't find my soundbar apparently it doesn't exist.😅
it worked but now remote turns OFF soundbar instead of TV .... ugh 🤬
Same everything works but power button for tv now
Didn’t work for Insignia soundbar. When I click up on the channel it’s blinking red
Reset your remote and try again
It worked on my old insignia sound system. It just took a lot clicks.
Didn’t work after multiple tries. You should speed up the video to make it even more unintelligible.
😂 😂 😂
Click on the transcript…it’s all written down.
Don’t understand
You go way too fast
With your sound bar already on
We’re going to pair your Xfinity remote with your sound bar.
Step 1
Hold down to A&D buttons until the light turns green
Step 2
press 9-9-2
Step 3
Channel up slowly until sound bar or audio receiver cuts off
Step 4
Press the center (OK/Select) button to lock the code in.
That’s it!
Turn your sound bar or audio receiver back on and test your volume.
(I recommend having the volume of your TV down to zero to avoid echoing effect.)
If, by chance your volume does not work on your sound bar start over.
Accept for in step 3 when the sound bar cut off continue to press the volume button until the sound bar cuts back on. This method will cycle through different codes that allows the remote to connect to certain compatible device brands and models.
Step 4
Press the center (OK/Select) button to lock the code in.
***Tip***
For some uncommon or offbrand models, it may be easier to find your code by channeling down instead of up.
Take your time and channel like each second of a clock, if, by chance, you overthrow it just channel in the opposite direction until device responds. Then press (OK/Select) to lock that specific code in.
Thank you!