How to install an EASY inline Hydro | E46 Drift Build Hydraulic e-brake
Vložit
- čas přidán 23. 07. 2024
- Welcome to my drift build. The vehicle is a 323i BMW E46 with and M52 engine.
The Bimmer finally gets a hydro. Take care doing this kind of work. If you are not mechanically minded probably get a professional to help. And watch some other videos to get a general idea.
Here’s all the stuff.
Hydro handle. bit.ly/3smlgXY
Brake Flaring Tool bit.ly/3SvhiqF
Brake Line. bit.ly/3QIWRFn
Brake Line T. bit.ly/49jsDjL
110PCS Rivet Nut Gun M3-M12. bit.ly/3MBTY6P
182x Brake Line Male Female Nuts Kit. bit.ly/49qrjvb
0:00 Intro
0:20 Parts used
1:35 Tools used
2:02 Mounting the handle
4:21 Making the lines
6:43 Flaring the lines
9:02 Connecting to factory system
9:52 Bleeding the system
11:53 Testing
12:34 Summary
#bmw #e46 #drift #build #hydro - Auta a dopravní prostředky
I watched a couple o vids from other creators and was just constantly skipping forward to find the real info. What a load of unnecessary waffle. Then i found you. Covered everything nicely and in good humor. Really great vid man. Thanks.
Great idea on the 90deg fence post bracket! Cheap alternative, im going to try that when I install a hydro on my Rallycross car.
Great video man!
Thanks mate 🙏
Bloody great video mate. Clean install
Thanks mate🙏. Glad you liked it.
Cool video bro. You’ve kinda gave me a method on how to do mine for in the future🤙🏾❤️🔥
No problem 👍
Cool video been following from the begining, just at the hydro stage myself will be going at it the weekend. All the way here in limerick ireland.
Legend. Hope you get some benefit from it. What car do you have? 🍀🤙🏻
@@BertusBuilds 323i same as yours 4door just in silver sorry for late reply will there be anymore videos?
Greaat videoooo!
Those of you that are in left hand drive countries should have it a bit easier with less lines to run.
Nice 1 bertus
Hey man just checking if you could do a video on how you set up the bumper/front end to be quickly removable
Sure can. I’ll see what I can do. 👍🏻
Is this with the brake booster deleted?
👏🏻👏🏻👏🏻👏🏻😍😍
Looks like that hydro will work a treat! Now that archie is gone, what's the next drift event for you?
Not many options locally other than QR. But I definitely have Raleigh on the radar for next year after visiting last month.
@@BertusBuilds Oh, yeah! I've been meaning to go to the halfway hangs. Looks like a fun event. Maybe it's finally time to weld the diff
nice work brother just wanna ask, if u pull the hydro doesnt the brake pedal press itself? wanna do the same thin as u but im scared of this thing
happening to me
No. It’s not an issue. Master cylinder front and rear chambers are separate. You’ll be fine. Pedal might feel a bit harder when hydro is applied that’s all. 👍🏻
From watching other videos people said that inline setups tend to make the pedal brakes more unreliable. Have you ran into problems like that?
The looks of a single caliper peases me more than having a double caliper. And the cost of install and parts increases a fair bit too.
Mine feels the same as it’s always been. I can’t vouch for other people’s setups. Hope you have some success. 👍🏻
@@BertusBuilds Thanks for your reply!
When bleeding the breaks and hydro i justcseen you pumping foot break, did you have to pump hydro at any stage or did fluid just make its way down the lines by itself
If your having trouble yes, maybe a few pulls on the hydro could help while bleeding it on the first stage, before you connect it to the rear lines. But you shouldn’t have to keep pulling the hydro repeatedly to get the air out. The brake master should push the air out.
@BertusBuilds I just have everything plumbed in didn't do any bleeding yet just wanted to make sure before I went at it so not to make a mess of it cheers bertus
Bleeding techniques you did worked a treat hydro working a treat, just 1 last question when stripping the car and you cut out wires that were no longer needed did the car still work away fine, first start up the other day and a few lights on dash, didn't go for spin yet hopefully the wknd around the block
@@adrianfarrell7239 I would advise unplugging the wires and running it before cutting. You can always plug thing back in if it causes issues. Air bag systems (which are mostly yellow wiring and yellow plugs) won’t cause any issues other than a light.
@@BertusBuildsman did you leave in the abs block? Iv tried several ways of doing this and none have resulted in a good locking hydro!
😂brake fluid bong thingy
Why your brake lines look like a swastika? 😂