NEW Girsan MC14 BDA .380 ACP - TheFirearmGuy
Vložit
- čas přidán 15. 06. 2024
- NEW Girsan Handgun. Here is the range review - • NEW Girsan MC14 BDA "....
Subscribe Here - goo.gl/R4Zvg4
Here is my playlist for various Handgun reviews - goo.gl/4fRCek
Here is my playlist for Long Gun reviews - goo.gl/hnU871
Here is my playlist called Fighting for the 2nd Amendment - goo.gl/OMZX60
Here is my playlist for other Gear & Accessory reviews - goo.gl/oADVpQ
Here is my playlist for range test reviews - goo.gl/t1c0Tl
Facebook @ / thefirearmguy
Twitter @ / thefirearmguy
Instagram @ / thefirearmguy
Super nice looking. Reminds me a bit of THE CZ 83. Hopefully 380 gets cheaper as more guns in it are sold. I wish caliber cost was based on how much actual materials go into a round. Because 380 would be cheaper than 9! And i wouldn't be paying more for 410 than 12 GA...
I've always liked full sized 380 handguns. Thanks for the review.
No worthless rail! ❤❤❤❤❤
Turkey is knocking it out of the park! Thanks Dan!
No doubt Joe
When Berettas got so expensive I retired my two back to the safe and out of carry rotation. Always loved carrying them so this new offering may have to get one to try out..
Good Review! With the exception of the Safety, looks to be an improved copy of the Browning BDA .380,
which was made by Beretta for Browning, which in turn was a modified Beretta 84.
Had a Browning BDA .380 at one time and I might consider buying one of these Girsans.
Looking forward to the Range Report!
I love it, if i had one wish tho it would be for decocker.
Agreed. It makes no sense to me for a semi-automatic to be double-action without a de-cocker.
You are full of surprises with another addition to the MC14 line. Thanks.
Looking forward to the range report Dan. That looks like a quality pistol. Nice job !
Yes, looking forward to your range report.
Im a fan of metal DA/SA pistols. Looks like another winner from Girsan👍
Comparable to the Beretta Cheetah 80x... Interesting!
Was thinking the sane thing... always wanted a Baby Hi Power ( can't remember the actual model name)
The 80x is optic cut and has a rail. If it was cheaper than $700-$800 I’d have one. I may have to settle for a girsan which I believe translates to “berettas for the poors”
I was thinking the same thing and probably half the cost
@@hillbillywizard75 I digress , it's a pistol for the smart people that don't buy the roll mark.
The MC14-T has a tip up barrel , like a Beretta Tomcat or model 86.
BDA - embracing its Browning Double Action with the closed slide, but with the frame mounted levers AND the Beretta 86 tip up barrel with the T version.
Dan, that reminds me of the Beretta model 84 I carried in the 80s and 90s. 13 rd..380. I wish I had never sold it. But now..this comes along..we shall see after your range time. I'm sure it will pass the test.
Stay safe.
Looking forward to the range review
Great video and wonderful pistol.. something is happening with the .380, I’ve seen more and more cases at the range and seen more purchase at the shops.. glad to see you put that glove one .. great review as always..
A nice looking little pistol and to me it looks like a miniature PO1.
Nice offering from Girsan , that gun remind me of the Bersa tpr380 . Girsan is releasing new guns more than any other Turkish manufacturer.
I noticed that too Jet
👍👍Thanks Dan, looking forward to you shooting it at the range. Nice looking pistol.
Good looking gun. Thanks, Dan.
Thanks Bob
Excellent pistols coming out of Turkey.
They made a good looking one, and imo the right size,most people dont need the added risk of pocket carry and the harsher recoil dont think you mentioned how stout the spring is
The spring is definitely heavier than the Walther PD380
Looks nice, I don't know why they don't give an extra mag.
Thanks bro. Keeping cost down
Thanks for showing this one, FireArmGuy.
This is pretty much a Browning BDA clone. Love that!
Came here to say that. The Browning BDA was based on the Beretta 81/84 and made by Beretta.
@@vksjd True! And it was a very nice gun.
@@S.A.Masquerade I've never fired a BDA or a Cheetah, but I've been interested and kept my eye out for a nice used one at a decent price. The new Beretta 80X is cool, but expensive. The MC-14T didn't appeal to me because I don't like not being able to break it down for cleaning. This might be a decent option.
@@vksjd I was considering getting a Bersa 380 Plus, but now I might hold out for this 380. I don't care much for the MC14T either. But I do like the BDA look.
Yo Danno, interesting looking gun. Thanks and stay safe
I've got an mc14t on the way. Wanted to check one out before potentially recommending it to the parents who are in their early 70's and interested in the idea of going to a 380.
just purchased one because of your review. thank you
I wonder if it takes Beretta 84 mags???
OR ... 80X mags
The MC14-T has a tip up barrel , like a Beretta Tomcat or model 86.
Wow, not a straight blow back! Nice!
Actually it is a straight blowback design. The barrel is easily removed for disassembly, but it remains completely fixed during operation. It is a Beretta 84/Cheetah design, but with an ejection port instead of the open slide, it is almost exactly like the Browning BDA 380. BDA is even in the name of this Girsan gun. Beretta made the BDA for Browning.
🤔 vs Bersa?
Believe it or not, the Bersa has less recoil.. shot both on the same day. For whatever reason this BDA is very snappy
Hi Dan, nice review!
What is the DA pull weight?
Good video as usual Sir !!!
Much appreciated GTO
I think I need this Good looking pistol.
It is a licensed copy of the Berretta 84BB.
It looks nice.
I have the 84BB with Packmyer grips and people luv to shoot it.
I am also a 380 fan. I have urban 2 legged predators and need little or no exit velocity.
I like the safety being able to be engaged hammer up and hammer down. I just wish that the safety included a decocker
Looking for the review of the tip-up barrel version...
That looks well made.
Model 84 with the Browning Style Closed slide but for a budget price.
Very reminiscent of the Bersa Thunder 380.
The price is right. Looks great. If it runs, I'll probably be shopping for one.
Nice my Ruger American compact with polymer frame wieghs 29 oz unloaded.
Similar to the Girsan MC-14T except the MC-14T has the pop up barrel. Any other differences?
I noticed that too. Not much different
I have Girsans. Girsan makes a great gun. However, my Bersa Thunder Pro has an aluminum frame, 15 round capacity, and a decocker. Great review, but I am sticking with my Bersa.
Nice looking pistol
Wow! Beautiful pistol
Unless they changed it since they were imported by Zenith, it's a merge of the Browning BDA and Beretta 84. Maybe a little more 84 because it would take the Beretta mags and grip panels (with a little fitting).
It is a great shooter except the hammer will nibble on your hand if you hold it high and tight. Hopefully they fixed that problem.
Solid comment Texas
Interesting, Zenith Firearms and Chiappa both sold a version of this several years ago. MC14 . Rural King sold the Chiappa .
Beretta frame inspired, nice review as always 😊👍
Girsan copies Beretta all the time - makes sense
It’s a browning BDA clone
OJ vibes with the glove test, Dan-O. I call Rider to the stand to question you. 👨🏻⚖️😂
The 380 is a good cartridge. The key to the 380 is the pistol. Get a good quality pistol and the 380 has great potential.
Hi Dan great to see ya again! This is obviously a copy of the Browning BDA .380. Dan I was wondering IF You would see if this Pistol will accept Mec-gar mags for the Beretta 84 or the BDA .380.
I had a mc14 recently but it was from the original imports maybe 4-5 years ago. It was very accurate, only ran rounded nose hollow points anything with a flat nose would fail to chamber. And it was terrible about binding on reassembly to the point of the slide was half on but it wouldn’t go on completely or off. Something to watch out for. After the slide got stuck and I finally freed it up I sold it bc I didn’t trust it anymore. I’m interested if these are just more imports of the same or if they’re truly like an updated version
Thanks!
Thanks so much Von. That means a lot!!
I could buy 3 of them for the price I paid on my 80X 😂
Just picked it up a RangeUSA and shot it this evening. Fantastic, reliable, accurate. Where can I get more magazines? Or do Browning BDA magazines fit?
Have a Girsan mc27 in 9mm
Nice you can carry cocked and locked, 80x you can't its a decocker😔
Looks like a CZ PCR in 380, nice
Wow! With a 3.8 inch barrel, I'll buy one !😅
It looks a lot like a CZ 75 compact, B,D or BD. Why have it be double action if there's no de-cocker?
I guess they didn't think a decocker was a big deal
Dan, I'm wondering if you can help me out ? Not really on the topic of this gun that you're showing but I have a Magnum Research mr9 Eagle 4 1/2 in. I'm looking to replace the front and rear sight to fiber optic sights. I can't seem to find them anywhere. Would you happen to know where I can get ahold of them, any information would be helpful thank you. Also I love the Gershen❤❤
After seeing your video or two on this pistol and comparing the MC14BDA to the Tisas Fatih 380, they are the exact same pistol best I can tell. I own the Fatih 380 and it is as nice shooting as my Beretta 84 it was patterned after.
Wonder if it is compatable with the browning bda grips and mags
That's a great question. I should try to figure that out prior to my range review
Looks like they have left a LOT of sight radius on the table. Could be another .5" apart if they cut the dovetails right.
Right on Rye
Nice bro!
Thanks bro
Dan/RUGER HAS A 9 INCH 44 MAGNUM/ PLEASE DO A VIDEO ON THIS. THANKS
Oh man I would love that
Maybe it costs $380 also!
$1 per caliber so $380 is right. I'm sure it will less.
Girsan had an MC 14 5 years, or so, ago that was a little more angular, squared off. This one looks more like a Browning DBA 380. Wish it had the hammer drop safety.
Sure, I just got a Ruger Security 380. It's great, but would rather have a metal one. This looks good.
Sold me on it 😊, can't wait to get my hands on one. Me and my credit card thankyou lol.
Does this have delayed blowback? The Beretta Model 84 I used to own was straight blowback and thus had an unfortunately heavy spring. Was a bear to rack the slide. This looks a lot more promising if it's not straight blowback.
My MC14T would not cycle consistently. Sent it back to the company but they did not fix it. Took it to a local gunsmith and he polished the lower feed ramp and now it runs great. It cost me $70 to send it to EAA Girsan and $20 for the local gunsmith. I WOULD NOT RECOMMEND THIS GUN OR THE COMPANY BECAUSE THEY DON'T BACK THEIR PRODUCT.
Is very nice little piece, well not so little... A little on the chunky side for a 380 though. I be lying if I said I wasn't interested. I actually don't think I'd ever carry it because I really don't carry a pistol in that light of a calibre. And if I need something small well, I have 9 mm's that are smaller than that and holds the equivalent amount of rounds or more. But at the end of the day.
I like it.
... this looks suspiciously like the old Browning BDA 380, had one years ago, great shooter. I would think that the old Beretta and Browning 380 mags will fit - and economically friendly, not like the Cheetah 80x at 50.00 a pop! And people complain that Sig mags are way overpriced ...
Beauty!
Thanks
It looks like a fantastic gun at that price. I would love to get my hands on one!
I am incredibly puzzled about this: I cannot figure out why you did not mention that it is a Browning BDA clone which of course is a Beretta Cheetah clone that was made by Beretta and had no open slide. BDA is even in the name. I know that you know all that -- ?? Why not mention it?
What’s the point of a double/single action pistol without a decocker? I’m not being snide - I legitimately want to know!
Anyone shooting a single action already knows how to let down the hammer.
You can carry it cocked and locked 😉
80x clone? Thanks for the great video
Browning BDA clone
Or Beretta 84. Kind of goes hand in hand
I like it
Thanks Cam
Browning BDA copy , nice !!
Pretty much thanks Anthony
I luv my 380acp tools
Hammer fired. 😁
Nice 🙂👍
Thanks Dragon
I found a website that says the MSRP is $368.00. not too bad, but im sure it will be less than $300 or so.
I couldn't find that
@@TheFirearmGuy gun magazine warehouse has an article on them from November, 2023.
want it so bad!
.380 is the come back kid!
Hope there are 10 rounds mags for it. For us less fortunate, living in firearm unfriendly states.
One magazine???
Dang, sucks that you have one in your hands but no MSRP
368
they list it as $360 msrp
glad to see this as the mc14 tip up was a dog..... be a year till the price comes off of MSRP . I dont presently own a 380. if this was cambered in 9mm I would buy 2....lol
Southpaw friendly is a must! But why do so many Arms Companies only provide one magazine? Is that hard to supply a spare?????
Definitely cost cutting Brent
Wow! Looks super nice! I like 380. You can get 380 cheaper than 9mm if you shop around for bulk ammo... It's actually quite a bit cheaper..
Where are you finding it cheaper?
Thanks Curly
👍
Looks like my Cheetah
Yes sir, for $350
Beretta 84BB clone
Yet another hammer fired metal framed not like we don’t have enough of those already, I’m telling ya we’ve reached the peak of gun innovation in todays world
Beretta 84 clone.
James Reeves has seen the new CZ about to be released. He has an interview about it, but can't release it yet.
@triggerfingerstudios So?
wear batting gloves ...