I see you made the same mistake that I made and put the cable holder, on the back of the head, upside down. Good to see even the professionals get it wrong.
You need to earth it at the start where you bring in the 220 volts ? Not just at the heater element, also at the bottom of the frame onto a stud. Plus to many parts for a Hyper cube, I got 1/5 of these parts in my Hypercube, and it 300 x 300 x 400.
Just ordered the V-Core 3 and I'm really excited for it! Does the "configurable kit" come with bolts for the EVA carriage or do I have to source those myself?
We need direction for the mounts for the electronics components to the back. You've left us sort of twisting in the wind here. Im willing to drill a hole in a 60.00 self souced panel but require additional information.
après avoir regardé 2h de vidéos j'avoue que je ne suis pas du tout sûr de vouloir acheter cette machine, le montage me semble impossible dommage car elle correspond exactement à ce que je cherche.
@ Rat Rig, Does the V-Core 3 work with the Mosquito Magnum +? If so, what is a supported extruder & mount? I cant seem to find an answer regarding Rat Rig v-core 3 and the Magnum + anywhere😕
where the fuck can we find all these mods that did not come with the printer? fuck sake man its frustrating to finish this build. you get 95% of the parts but are missing the 5%
Currently at the same stage. "Everything" is assembled, I just need to complete the wiring and find some of these printed parts that did not come with the base set, and with other sets I have purchased through other venders. Looks like I have to make my own power supply mounts. As well as a power cord to go with the plug I had to but. I was also pre-purchasing wiring stuff, and connectors and it seems I'm still missing things. I unfortunately wont figure out until I'm there and ready to do it. Silver lining with all this. If I ever do this shit again. I'll be a little more knowledgable.
EVA printed parts color scheme is wrong, hex nuts insertion technique is incorrect, some hex nuts are not black and zip ties also should be black! Other than that it's just perfect! Good job! 👍
I find it frustrating that so many of these parts were not included in the build kit.
true
yes it a big probleme
I see you made the same mistake that I made and put the cable holder, on the back of the head, upside down. Good to see even the professionals get it wrong.
Then you cut back to the head to add the blower fan and you’ve realised your mistake.
They only did it that way to get us to use Discord more :)
Great video... I really do need to shorten all my wires LOL
You need to earth it at the start where you bring in the 220 volts ? Not just at the heater element, also at the bottom of the frame onto a stud.
Plus to many parts for a Hyper cube, I got 1/5 of these parts in my Hypercube, and it 300 x 300 x 400.
Just ordered the V-Core 3 and I'm really excited for it!
Does the "configurable kit" come with bolts for the EVA carriage or do I have to source those myself?
afaik they come with all the hardware for the printed parts
If you add the power supply to the order, does it come with a solid stated or do I have to source this my self?
We need direction for the mounts for the electronics components to the back. You've left us sort of twisting in the wind here. Im willing to drill a hole in a 60.00 self souced panel but require additional information.
where is the file for the cable management clips (to put cables on the 3030)? i cant find the file anywhere. thanks
The mounts for the power supply did not come in my kit. Where can I get them?
How to wire my superPinda (Fuchs)probe and change the printer.cfg to let it work? Also this isn’t an octopus 1.1
I have lights in my own dungeon ;)
is the motherboard and all electronic included when order the RatRig ??
no
après avoir regardé 2h de vidéos j'avoue que je ne suis pas du tout sûr de vouloir acheter cette machine, le montage me semble impossible dommage car elle correspond exactement à ce que je cherche.
tomalo como un desafio,si consiges montarla imagina que aprendizaje y satisfacción.
@@Erosgenuino entre temps j'en ai acheté une déjà monté et j'en suis très satisfait 👍
@ Rat Rig,
Does the V-Core 3 work with the Mosquito Magnum +?
If so, what is a supported extruder & mount?
I cant seem to find an answer regarding Rat Rig v-core 3 and the Magnum + anywhere😕
check out eva thats all the info on this system.
Yes it does.
More info: main.eva-3d.page/
It supports EVA system which lets u print seperated parts for specific hotend/extruder/mounting rail type which knows to work togather
You don't get that skilled with a hex key wrench unless you've built a few machines.
I bet he wears a holster for it.
@@ChristopherJones16 that skill lead to me buying a RatRig. I accomplished swore finger tips. Lol great printer tho. The quality is amazing.
where the fuck can we find all these mods that did not come with the printer? fuck sake man its frustrating to finish this build. you get 95% of the parts but are missing the 5%
Currently at the same stage. "Everything" is assembled, I just need to complete the wiring and find some of these printed parts that did not come with the base set, and with other sets I have purchased through other venders. Looks like I have to make my own power supply mounts. As well as a power cord to go with the plug I had to but. I was also pre-purchasing wiring stuff, and connectors and it seems I'm still missing things. I unfortunately wont figure out until I'm there and ready to do it.
Silver lining with all this. If I ever do this shit again. I'll be a little more knowledgable.
EVA printed parts color scheme is wrong, hex nuts insertion technique is incorrect, some hex nuts are not black and zip ties also should be black! Other than that it's just perfect! Good job! 👍