PERFECT BMW F22 Wheel & Tire Fitment Guide
Vložit
- čas přidán 22. 07. 2024
- In this video, you'll see the comprehensive BMW F22 Wheel & Tire Fitment Guide. This guide will help you find the right wheel and tire for your F22 car and ensure a perfect fitment.
If you're looking to upgrade your BMW F22 wheels and tires, then you need to watch this video! Find the right wheel and tire for your car, as well as how to fit them correctly. By following this guide, you're guaranteed a perfect fitment and increased performance in your BMW F22!
Wheel Discount: rexracingwheels.com/discount/...
- Use code "vroomfreeship" for free shipping
www.mrgraceco.com/store/c14/T...
MRG Titanium Studs: (Discount Code: “Vroomtuber”)
Ceramic Coat: tinyurl.com/armorshieldIX
Fender Roller: amzn.to/3JyTRYe
KW DDC: bit.ly/30PQbOf
Vorshlag Camber Plates: bit.ly/3DM0Nwn
Thanks for tuning in. If you are looking for a complete tool kit as well as video gear hit the links below.
Tool Kit: kit.co/fritzramos/bmw-mechani...
Video Gear: kit.co/fritzramos/filming-gear
If you are looking to get started on CZcams, consider Tube buddy as it has helped me out a great deal. Try it out for free: www.tubebuddy.com/financialfi...
Some of the above links are affiliate links. By using them you help support the channel at no additional cost to you. Thank you for your support.
00:00 Current Setup
00:45 What should you do FIRST
01:12 17, 18, or 19?
01:38 What's the Largest Wheel Setup?
02:50 225 Tires
03:12 No Stretch Look
03:25 No Stretch or Camber Option
04:03 Discount Code
04:17 4 Cylinder Recommendation
04:54 Benefits of an 8in Wide Wheels
05:13 6 Cylinder Recommendations
05:26 Camber Adjustments
06:38 245 Tires
07:01 235 Tires
07:09 Rubbing Issues
08:05 MORE DISCOUNTS!
08:28 Wheel Review
09:16 I WISH all Wheels have THIS
09:35 Is Rex Racing Wheels GOOD? - Auta a dopravní prostředky
Great video man 👌 sucks wheel options are so limited for the 2ers but those Rex wheels look EPIC
Just put a set of Apex VS-5RS on my M235i and I love them!!
those wheels look amazing! Thanks for the info. I want to wrap my wheels on some conti sport contact7s
Hey Fritz, consider giving 245/40/18's a shot for your next set of tires. It'll take a little more camber, but they look super meaty on my 18x8.5+35's, and drive as good as they look. My speedo actually reads perfect with GPS, since it's programmed from the factory to read fast due to regulations, and the extra sidewall helps with peace of mind when I'm driving cross-country.
Man, I’ve been trying to figure out my wheel gap situation and this video just gave me so much progress towards a solution I’ve had this problem for almost a year. If anyone wants to help. I have the 384 (Y spoke) and the front gap isn’t frustrating to look at with 12mm spacers (225/40/18) but the rear gap is frustrating with the same tire size and 15mm spacer. Do you think I could run a 255/35/18? Or should I get 245/35/18? tia.
Just ordered custom 19inch alloys for my M240i before watching this video. I’m not interested in lowering the car so what would the recommended tyre configuration be for 19inch wheels? Pls help
Thank you
did you need any camber for the rex wheels in 18x8.5 et35 with 235/40 tires?
Bro I need this video for a f36 2018 440i gran coupe xdrive
doesn't increasing tyre profile decrease acceleration? also affect speedometer, milage, extra weight ?
Will I be fine with stock ride height, 18 inch, 35 offset, and 10mm spacers all around? I recently got the spacers for my stock wheels, but now Im putting on new rims.
will 18x8 offset30 with 225/40/18 square setup work with my m240i 2018 being on stock suspension without any uneven wear or rubbing, ??? will that size look good on the rear?
Hey fritz how did you set up Tpms sensors??
i did a 18x9 et32 front and et42 rear wrap w 255/35/18 square.. but need massive camber.. 3.5 front 2.2 rear.. but oh well i track my car so its alright
Can I put a 19x9.5 wheel with stock fitment with no problem?
How low can i go with the 18 inch setup without rub? Would 1 inch front 1.5 inch rear drop be alright? I have Xdrive so theres only 1 option really for lowering springs
Wow I need this exact setup how much would this run me
I was able to run Apex Ec7s wrapped in Nitto N555g2 245 35 18s 8.5 et 35s on front. 275 40 18 9.5 et 58 and 5mm spacer. KWV2 suspension and F8x LCA and TS. so yea you definitely know what you are talking about.
On what car? M235i?
18/8.5 35 offset on stock suspension is fine?
is vex still doing a promo?
Can you do a video about your titanium stud conversion ... always been curious about them and torque specs when compared to steel
Here you go, czcams.com/video/ApSqwKh0z3k/video.html
Competently stock and no rolled fenders 245/35/19 MPS4S ET35 8.5" front and 265/35/19 ET48 9" rears. Fronts are slightly stretched compared to the rears. No rubs whatever and on adaptive stock suspension. Wheels are BBS CI-R and no spacers
265/35/19 in the rear?! How accurate your speedometer now? And how is your abs not freaking out all the time
I plan on leaving stock suspension, but really want to run 19’s. What do you recommend. I’m currently looking at 235/35/19 19x8.5 et40 front, 255/30/19 19x9.5 et45 rear. I don’t want any stretch either.
I have this setup
Apex EC7 Anthracite, m235i with Dinan Lowering Springs
Front 19x8.5 et 35, 225/35/19
Rear 19x9.5 et 43, 255/30/19
Toyo Proxes AS
Zero rubbing, perfect fitment. 19 inch does not affect ride quality at all.
Hey I just wanted post here because I'm looking to get new rims and I've never bought them before.
I drive a 2016 BMW M235i XDrive on stock suspension and fitment. I'm looking to get rims for my tires that are currently set up on:
Front 7.5Jx18 ET 45
225/40 R18
Rear 8Jx18 ET 52
255/35 R18
I'd love a more flat look for the tires and rims and was curious if an 8.5" front with 35mm offset and a 9.5" rear with 45mm offset would work or if that's crazy. Any help is appreciated! Great video btw!
18x8.5 ET35 works for the front, but it sticks out a little. 235/40/18's might take some camber to fit, and 245's of any variety definitely will. As for rears, I'm sure 18x9.5 ET45 will work, but make sure the rolling diameters are similar front and rear. If the diameter of the front is over 1% bigger or smaller than the rear, it could destroy your xDrive system.
How about 18x7.5 et45 square setup with 225/40/18s?
I have a double spoke with 7.5 front and 8.5 on rear but I am trying to improve comfort and reduce road noise by going square setup and getting non-performance tires on my 21 m240 rwd.
Either I get the car more comfortable or my wife will make me sell the car!! Help me please lol
Since the setup you just named is the exact same as stock xDrive cars, it'll fit perfectly. In fact, I'd say you can go a bit bigger without any issues. I'd propose 18x8.5 ET40 with 235/40/18s would do the trick. I love the 245/40/18's on my car, but the speedometer/odometer error might be a bother for you. Also takes a little more finesse to fit them.
When you say “M” car, do you specifically mean a proper M car and not an M235?
Yes, the Calipers on the M cars are larger then the M Performance ones found on the m235i, m340i etc.