Really helpful video man, thanks for filming. I could see the slit in the back end which looked like it should come off but I didn't want to pull to hard in case I was mistaken and ended up breaking it.
Perfect, thanks - was in middle of job and needed to change. Of couse, no instructions in or on the or with the knife and it's by no means intuitive...I also now realise the 'heel' bit is the blade breaker tho pliers are fine. Not a great knife actually; it's very 'handed', so not much use for lefties or r/h using non-dominant; you seem to need to grasp two or three bits of the mechanism to hold blade steady
Mines seems to have a bit of rubber elastic that splits the 2 black parts in the slider, is there any way to stop this? I can't find any sort of push location etc.
i turned the storage device over so that the pushing out device was facing away from me, then (in my left hand with the blade extraction end on the right) I put the sharp edge of the blade uppermost and the small cut out circle in the blade on the right, push it into the orange receiver, it has a little bit of resistance but only a little. Hope this helps?
Hi Paul, I've just had a go with mine and it went straight back in, i turned the storage device over so that the pushing out device was facing away from me, then (in my left hand with the blade extraction end on the right) I put the sharp edge of the blade uppermost and the small cut out circle in the blade on the right, push it into the orange receiver, it has a little bit of resistance but only a little. Hope this helps?
@@hobbyworkshop8595 Thanks, this helped. A mix of your suggestion and pushing the spring out of the way through one of the little holes with a small screw driver. Cheers
@@hobbyworkshop8595 I’ve worked it out thank you. This one is even easier once you know! You just press the small button at the top side and pull out the old blade. Then while pressing the same button push the new blade in, then release the button. Your video seemed to show the side of the knife off. Thanks for help.
![[Tuto] Comment changer la lame d'un cutter à glissière, démonstration démontage remplacement neuve](http://i.ytimg.com/vi/OrMgjNjVAng/mqdefault.jpg)
I bought this knife years ago, and just spent 10 minutes struggling to work out how to replace the blade. Thanks!
Thanks for this. Didn't realise the orange bit at the back comes off! Managed to replace my blade after watching this video. 10/10
Was not guessing it came out the back! Thank you!
Thank you! I have been trying change this thing for days!!!
You make it look so easy-I don’t know why I was struggling 🤷🏼♀️?!
Thank you so much!!
Thank you…excellent demonstration & explanation…Going to change mine now after wasting an hour this morning 😀👍
Merci beaucoup, je n'ai pas changé depuis longtemps et j'avais peur de tirer fort l'embout de peur de le caser. Bon tuto, félicitations
Thank you for this. Quick, to the point, succinct and very helpful, I wish all instructional videos were this good. Great job sir. 😀👍
Thanks mate stumped me till watching your video.
Really helpful video man, thanks for filming. I could see the slit in the back end which looked like it should come off but I didn't want to pull to hard in case I was mistaken and ended up breaking it.
Doh! Of course!!. I’m an engineer and still had to search how to get the old blade out. Thank you for posting this video.
Thanks for this as I’m not the sharpest knife in the drawer until now 😊
Cheers buddy, nice and simple explanation after sitting in the van for 10 minutes ragin
Extremely useful, many thanks for taking the time to make and upload this video :-)
I would never have figured that out. Thanks
Thanks for this. I was scratching my head for a while before fining this video!
You know I'm very disappointed in myself that I needed a video in order to be able to carry out this task. :-(
Thanks for the video though!
thank you so much, this thing was giving me jip for ages!
Thank you very much for posting this, it was really helpful.
Thanks I’ve been looking at it for half an hour wondering how to do it
No instructions with this knife, so thank you for the video!
Man I was doing this so wrong for years. A big thank you for the video.
Thank you I would never have worked it out and so simple when you know
Thanks so much Brad! Ridiculously easy when you know how...
Absolutely brilliant… I’ve just spent 20 minutes faffing about with this thing! 🎉🎉🎉😂😂
Why on earth does this blade not come with instructions for this, 🤔 thanks
Thank you so much!!!!
I will never quess the first move - i need to take off the back of knife
Thank you
Really helpful and straight forward video 👍
Thanks, good instructions.
Life saver. Thankyou
Thanks lol I was starting to feel stupid I was opening screws and everything 😅
thanks pal. Much appreciated.
Thanks Brad. How easy was that😂
Thank you so much!!!!❤😊
Perfect. Thankyou.
Thanks, couldnt work it out!
Just the job.
Cheers 👍🏼👍🏼
Thanx bro. Usefull ❤️🤘
Thank you mine was broken it’s fixed know
And I short video answered my questions in seconds
Hello. Thank you.
Thank you 🙂
Thank you !
Thank you.
Thanks!
Perfect, thanks - was in middle of job and needed to change. Of couse, no instructions in or on the or with the knife and it's by no means intuitive...I also now realise the 'heel' bit is the blade breaker tho pliers are fine. Not a great knife actually; it's very 'handed', so not much use for lefties or r/h using non-dominant; you seem to need to grasp two or three bits of the mechanism to hold blade steady
Didn’t know about the heel utility, great knowledge.
Thanks a lot
TTHANK YOU VERY MUCH!!!!!!!!!!
👍👍👍
Life saver
Thank you 🙏
Merci 🙏
Thanks a lot !!!
Mines seems to have a bit of rubber elastic that splits the 2 black parts in the slider, is there any way to stop this? I can't find any sort of push location etc.
Sorry I couldn’t help with tgst
Can you put the blades back inside the black container thingy
i turned the storage device over so that the pushing out device was facing away from me, then (in my left hand with the blade extraction end on the right) I put the sharp edge of the blade uppermost and the small cut out circle in the blade on the right, push it into the orange receiver, it has a little bit of resistance but only a little. Hope this helps?
Omg
Thanks
Do you know how to put a row of blades back in the storage device...pushed mine all the way out trying to work it out lol
Hi Paul, I've just had a go with mine and it went straight back in, i turned the storage device over so that the pushing out device was facing away from me, then (in my left hand with the blade extraction end on the right) I put the sharp edge of the blade uppermost and the small cut out circle in the blade on the right, push it into the orange receiver, it has a little bit of resistance but only a little. Hope this helps?
@@hobbyworkshop8595 Thanks, this helped. A mix of your suggestion and pushing the spring out of the way through one of the little holes with a small screw driver. Cheers
Great thanks. Magnusson [AKA B&Q] should give better instructions. May of been on the packaging but that was binned years ago!
The packaging i had didn't have instructions and nothing online either. Poor show from them on this occasion.
My knife recently bought does not have an end to pull off.
The video dose t show how to get the side off either
Hi Frank, you must have a new version of the craft knife, not sure what you mean by getting the side off?
@@hobbyworkshop8595 I’ve worked it out thank you. This one is even easier once you know! You just press the small button at the top side and pull out the old blade. Then while pressing the same button push the new blade in, then release the button.
Your video seemed to show the side of the knife off. Thanks for help.
@@frankwilliams-thomas1022 Thanks Frank, must be an updated version of the knife as the one in the video was as it comes in the package.
В мене є нічого інтересного в ньому намає є дешевше і намного лучше хотя і цей недорогий но неудобна ця функція лічно як для мене
Мені шкода, що цього разу вам не допомогли.
Jestem debilem xd