Your tail trick... Do everything you have here, but go one more step, fold the blade towards the front. This way it is easier to see which direction it is moving... Just one more way to skin a cat... Also, I recognize your channel name, are you quite active on helifreak? I think that's where I seen it...
Thank you for this informative video. I am making the switch to vcontrol. This looks so simple and fun! Setting up kontronik speed controller should be just as simple right?
Tobias Miller yes, super easy but a slightly different process. I made an earlier video showing how exactly to do that. Please check them on earlier videos. Thanks for the kind words!!
@13:00 you're talking about leveling the swash electronically. In the OG VControl there was fine trim at high and low stick as well with Pro upgrade. Is this feature gone in the touch? Or is there an app that needs to be loaded to get that functionality back? I'm asking because I'm migrating my NEO from one heli to another and need to do setup on the new heli on the touch; and now I can't find the endpoint adjustment menu.
I always set up zero pitch with the blades from the side of the helicopter, not facing forward, I know cyclic pitch is measured with blades facing forward and over tail boom
HELLO. WE WOULD LIKE THE HELICOPTER TO RISE VERY SLOWLY WHEN THE COLLECTIVE PITCH CONTROL STICK IS MOVED. PLEASE TELL US THIS CAN BE ADJUSTED IN V-BAR CONTROL? DO WE NEED TO CHANGE THE EXPONENT (EXP) TO DO THIS? IS IT CORRECT? IF SO, WHERE IS THIS SECTION IN V-BAR CONTROL?
@@laughingstillnow -5,5…0…+9,5 HELLO. PLEASE TELL ME, IF THE POSITION OF THE TOTAL PITCH CONTROL STICK IS AT ZERO DEGREES - CAN THIS AFFECT THE RISE OF THE MODEL UPWARDS, THAT IS, MAYBE I NEED TO SET +2 DEGREES IN THE MIDDLE, FOR EXAMPLE, SO THAT THE MODEL WOULD RISE AND DESCEND SLOWLY?
Hi. I am using GOVERNOR ESC SCORPION. Is it possible that on the ground there are some rotor revolutions, and others in the air? (They are respectively lower)
@@laughingstill Well, for example, on the ground before takeoff the value is 1650, and when it took off 1520, but the value in the air is stable and constant. Also tell me, how does it affect the flight if I change the GAIN value: P, I and D (soft, medium and fast)? Yes, I forgot to mention that I am not going to fly the LOGO 800 3D. For me, the flight is important ✈️ such as a copy of a helicopter.
@@laughingstill How to understand? You mean the ESC SCORPION adjusts? I forgot to say that before that, the first time I took off at 80% of the throttle curve, the stick was almost in the uppermost position, and when I took off today everything was fine, the stick was in the correct position (just above the middle).
Oh ok, you are trying to use a “normal mode” with an electric. That is to use for nitros to keep the motor from bogging in start up. An electric does not need that. You should keep your sticks at the center and click the motor on. The esc will spool up to the head speed set and then you lift off and fly.
Thanks alot! I successfully made My first ever setup thanks to this video. Thanks for getting me into the air! :)
Glad I could help!
Excellent Video. Thanks for doing this!!!
You’ve been very helpful , thank you.
Your tail trick... Do everything you have here, but go one more step, fold the blade towards the front. This way it is easier to see which direction it is moving... Just one more way to skin a cat...
Also, I recognize your channel name, are you quite active on helifreak? I think that's where I seen it...
Thanks, very helpful for a first time user of Vbar. Unfortunately the video got cut off at the end.
Cheers.
Nice video my friend keep it coming
In the same place. It is in the “flight parameters” menu then select “Governor “
laughingstill thanks
Thank you for this informative video. I am making the switch to vcontrol. This looks so simple and fun!
Setting up kontronik speed controller should be just as simple right?
Tobias Miller yes, super easy but a slightly different process. I made an earlier video showing how exactly to do that. Please check them on earlier videos. Thanks for the kind words!!
Thank you for the video. Is there a way to adjust cyclic through after you tell the vbar where 8° is?
Yes, agility or “rate” (depending on what version you have) will adjust how fast the heli flips and rolls.
Nice video! I am making the switch to vcontrol touch. It's time to retire mine true JR9303x
@13:00 you're talking about leveling the swash electronically. In the OG VControl there was fine trim at high and low stick as well with Pro upgrade. Is this feature gone in the touch? Or is there an app that needs to be loaded to get that functionality back? I'm asking because I'm migrating my NEO from one heli to another and need to do setup on the new heli on the touch; and now I can't find the endpoint adjustment menu.
Thank you for the video!! How would one calibrate a Hobbywing with the new firmware?
I don’t own any Hobbywing ESCs but with every other esc that works with VBAR you don’t have to calibrate it when using the VBAR gov
Hi Great video i just got a vbar vlink and a v control touch how do you set up the rescue thanks paul
I always set up zero pitch with the blades from the side of the helicopter, not facing forward, I know cyclic pitch is measured with blades facing forward and over tail boom
Glad it helped!
I am looking for a flybarless system. Could you advise me? I hesitate between the Jeti DS-12 + Spirit GTR combo or the VBar control touch + Vbar neo.
Whichever one it “sees” first is the one it connects to
Where i can find ESC Output. In the old vbar Control Version i can find it under Governors - headspeed.
HELLO. WE WOULD LIKE THE HELICOPTER TO RISE VERY SLOWLY WHEN THE COLLECTIVE PITCH CONTROL STICK IS MOVED. PLEASE TELL US THIS CAN BE ADJUSTED IN V-BAR CONTROL? DO WE NEED TO CHANGE THE EXPONENT (EXP) TO DO THIS? IS IT CORRECT? IF SO, WHERE IS THIS SECTION IN V-BAR CONTROL?
@@very9000 change your overall pitch in setup. How much pitch do you have it set to now?
@@laughingstillnow -5,5…0…+9,5 HELLO. PLEASE TELL ME, IF THE POSITION OF THE TOTAL PITCH CONTROL STICK IS AT ZERO DEGREES - CAN THIS AFFECT THE RISE OF THE MODEL UPWARDS, THAT IS, MAYBE I NEED TO SET +2 DEGREES IN THE MIDDLE, FOR EXAMPLE, SO THAT THE MODEL WOULD RISE AND DESCEND SLOWLY?
Hi. I am using GOVERNOR ESC SCORPION. Is it possible that on the ground there are some rotor revolutions, and others in the air? (They are respectively lower)
You mean different headspeeds?
@@laughingstill Well, for example, on the ground before takeoff the value is 1650, and when it took off 1520, but the value in the air is stable and constant. Also tell me, how does it affect the flight if I change the GAIN value: P, I and D (soft, medium and fast)? Yes, I forgot to mention that I am not going to fly the LOGO 800 3D. For me, the flight is important ✈️ such as a copy of a helicopter.
Ok, that sounds like you me motor is not tuned just yet. Too rich..
@@laughingstill How to understand? You mean the ESC SCORPION adjusts? I forgot to say that before that, the first time I took off at 80% of the throttle curve, the stick was almost in the uppermost position, and when I took off today everything was fine, the stick was in the correct position (just above the middle).
Oh ok, you are trying to use a “normal mode” with an electric. That is to use for nitros to keep the motor from bogging in start up. An electric does not need that. You should keep your sticks at the center and click the motor on. The esc will spool up to the head speed set and then you lift off and fly.
Wait face up wires to the front???? is that not the rear???
It is referring to the servo wires. Mine are facing the front
@@laughingstill Ahh i'm an idiot.
What Happens if you Power up two of your bound Models?
The first one to connect wins.
Is there a way to reset the Mikado v touch radio to start over like new. I need to change the language to English.
lee rossi yes, load the welcome app
I`m new to this radio can you tell how to do this.
Have you connected to WiFi and loaded the apps to the radio?
yes Wi-Fi is set up
lee rossi you need to watch my other videos..