Not for lcd only. It is freezing machine for disassemply all phone parts by freezing and breaking adhesive material between phone parts in froozen state
They do this to save money and time as replacing glass backs are difficult This is also used to salvage non-damaged digitizer and screen. Instead of replacing front glass cover and screen, they just need a new cover
glass backs why not get a heat gun and wait for it to heat up and then pry it off of course theres cause of damage but its not as time consuming as this if you do it right
I'm gonna try dry ice in a foam cooler instead. I don't have a cryogenic machine like this. It's -109.3 degrees Fahrenheit (-78.5 degrees C). Maybe that will do it. Oh, wait....the display on the machine says -180C. That's getting pretty cold.
lcd work only the glass attached to it breaks and we think the lcd panel gone..all shopkeeper tell u that panel need to be relace and it costs almost 30 percent of the cost of phone while they just relace the glass wch only cost 2 to 3 dollar
@@noone251 as a phone repair guy i can confirme that most repair shops charge for a new display where all they do is just changing the protector glass wich cost for the most 10d and need less than 45 min of work
no one yes, but in fact when you look at the cost of this device the price didn't justify doing glass only this way. The price of repair to the customer would go down by only $10 or so because you would still have to pay off the machine cost, marketing, franchise fees, store rental, employee hourly labor rates, etc. also keep in mind these machines require you too remove EVERYTHING else from the frame to replace the glass, which means repair can't be reasonably done while the customer waits it would take longer than 30-45 mins.
@@GoodHydration what we are saying is that some repair shops charge for a hole screen while all they do is replacing the glass which is a sort of ripoff its not about the cost here its about credibility
It's China. They run entire assembly lines for producing more apple products. Only in the states does apple have the ability to infringe on the right to repair
Y así es como se dañan varias pantallas jajajaja lo hacen sin el mínimo cuidado jajajaja la máquina ayuda claro pero no la vuelve indestrutible jajajaj sólo vean como doble las pantallas fácil al momento de probarlas jajjaja crack
Backlight in iPhone 5,6,7 in my case , they simply go to damage, after 5 sek in freezer like this I saw like the backlight module separates itself. Sorry for my poor english. I don`t recomend this freezers.
for 2sides curved lcds, it did cheaper to use heating machine to separate glass and frame, but for 4sided curved lcds, if we use heating plate and card to separate, most time will damage touch function, that is more risky
Heating the screens do a much better job than doing this (in which should be obvius in itself). Now because of that, you create a much higher risk for liquid damage due to the condensation from the frost
Not for lcd only. It is freezing machine for disassemply all phone parts by freezing and breaking adhesive material between phone parts in froozen state
Lcd doesnt get damaged at such temp?
They do this to save money and time as replacing glass backs are difficult
This is also used to salvage non-damaged digitizer and screen. Instead of replacing front glass cover and screen, they just need a new cover
yes dear, that's what we did, thank you~
love you too baby boo
glass backs why not get a heat gun and wait for it to heat up and then pry it off of course theres cause of damage but its not as time consuming as this if you do it right
Very impressive work.
2am and I know it's bad when I have no clue wtf I'm even looking at!!!
bandit 911 reading this at 2 am 🤣
me too hahahahaha
Hahahahahahaaha
That was very funny
me tooo ha ah hah ah ah
how to make money by putting in the freezer now thats what i call a CD ACCOUNT
НУ ВЫ ПРОФИКИ !!!!!!! ОФИГЕННО 👍👍👍👍👍👍👌👌👌👌👌👌
А потом продают телефон на алике! Как новый!!) молодцы интересно оно работает?
Your brains is sooper am very happy to watching this video
He didn't just separate 4 screens in like 25 seconds, did he? 🤯
That's a cool machine.... Get it ? LoL, I'll show myself out...
you can make ais cream right
I'm gonna try dry ice in a foam cooler instead. I don't have a cryogenic machine like this.
It's -109.3 degrees Fahrenheit (-78.5 degrees C).
Maybe that will do it.
Oh, wait....the display on the machine says -180C. That's getting pretty cold.
Only removing the LCD s. But who will show whether they work or not
lcd work only the glass attached to it breaks and we think the lcd panel gone..all shopkeeper tell u that panel need to be relace and it costs almost 30 percent of the cost of phone while they just relace the glass wch only cost 2 to 3 dollar
@@noone251 as a phone repair guy i can confirme that most repair shops charge for a new display where all they do is just changing the protector glass wich cost for the most 10d and need less than 45 min of work
@@gamezmode1912 yes bro
no one yes, but in fact when you look at the cost of this device the price didn't justify doing glass only this way. The price of repair to the customer would go down by only $10 or so because you would still have to pay off the machine cost, marketing, franchise fees, store rental, employee hourly labor rates, etc.
also keep in mind these machines require you too remove EVERYTHING else from the frame to replace the glass, which means repair can't be reasonably done while the customer waits it would take longer than 30-45 mins.
@@GoodHydration what we are saying is that some repair shops charge for a hole screen while all they do is replacing the glass which is a sort of ripoff its not about the cost here its about credibility
I wanted to learn more column technique, as you applies to the Oca of the edge edge and the iPad display
Great idea 😁
Regards from Europe from my channel Bro's 😁
I could watch this all the day
Will work in home freezer at -20 Celsius
Great 👍 job 👍👍
dont reless them iphone screens apple will sue you for it lol
It's China. They run entire assembly lines for producing more apple products. Only in the states does apple have the ability to infringe on the right to repair
Why not handle the lcd ls with a little more precaution, maybe you Would not have so high fail rate then
Dan Jackson I was thinking the exact same thing... the way he was bending those larger lcds was cringe worthy.
Those screens are not even cracked! Why disassemble it.
the repair shop refused to repair my Samsung screen because of the risk, I could see why now
Very nice
Esa máquina se puede hacer con placas de Peltier y una base de aluminio de 4mm
yvan barrios imposible, está máquina llega a 170 grados bajo cero y las placas peltier solamente se aproximan a cero grados
Podrían decirme que material es ese
Displays Are Warking or not ??????
May it will be harmful to the LCD that consist of several layers like the Chinese on?
Water free. The only thing what it save is the motherboard and housing. Massive refurbishment.
when the bigger piece on the third phone came off and he was like "HUH:?" I was like....shit don't let the boss see... but he knows what he's doing.
How much time did you give the Samsung lcd screens to freeze???
Y así es como se dañan varias pantallas jajajaja lo hacen sin el mínimo cuidado jajajaja la máquina ayuda claro pero no la vuelve indestrutible jajajaj sólo vean como doble las pantallas fácil al momento de probarlas jajjaja crack
Are those lcd still working?
this is can iPhone 6s? 7/8 ? because its lcd not led ? not damage with water ?
does this work on all smart phones ?
Can you remove the broken glass only without breaking the lcd?....and after that will the lcd still working?
yes dear, if only remove the broken glass, lcd still working
Work 100% but lcd have bubble.. is For too much low temperature?
2:00 когда что то пошло не так =)
Так я и не понял чем он занимается
can i do this in my freezer?
it requires less than -150 degree temp and ur freezer may give upto 0 degree only
@@noone251 To be honest, that would be one, piss poor freezer!!
why the screen needs to be freezed to remove it!
Wow nice
So it is fast as using heat to melt the glue
very nice
can i do the same with my regular freezer?
How much is the machine
Backlight in iPhone 5,6,7 in my case , they simply go to damage, after 5 sek in freezer like this I saw like the backlight module separates itself. Sorry for my poor english. I don`t recomend this freezers.
You are using it wrong
How can I communicate with you directly ..... I am interested in the machine, what is the cost?
Nice work
اكو عرب بالطياره 😅 يالله هذول اهل العيون المشنطه يخبلون الواحد
شو فهمت من الفيديو لان أنا مافهمت شي
it will make short any electricity on lcd or konektor when ice becoming melt to water?
this process not make water. because that ice sublimate
Nice video
А что у вас на всех стекла та целые. Меняют как правило с разбитым стеклом!
Причем дисплеи китайские iphone 6s
What ice or gas mixture you use? Can you link me to a build of one of these. Or a diy one?
Thanks
its liquid nitrogen
U can do it with dry ice also
S6edge plus display price ketna ha Ji dasna
Isn't using heat to soften the glue and making it easy to seperate glass/screen a lot easier and cheaper?
for 2sides curved lcds, it did cheaper to use heating machine to separate glass and frame, but for 4sided curved lcds, if we use heating plate and card to separate, most time will damage touch function, that is more risky
I didn't know that, thanks for explaining! :)
@@ymjcocozhang2763 four sided ?
which is best for all types of display regrigerator glass seprater, OR heating plate glass seprater machine
You export the machine freezing machine?
Price for this machine with shipping to Switzerland
I was wondering if dry ice could give me this result
Everythingtech yes it does czcams.com/video/pqz2wPfJG7w/video.html
This is Nitrogen
Nope dry ice barely reaches -135C while nitrogen reaches up to -145 to -150 but this ain't nitrogen, this is cryogenic freezer and it goes below -180
you gonna need a big surface tho, but yeah it will result the same
@@steal0ed dry ice will reach only -35 c
so what's the point at all?
There is a possibility of water entering TFT LCD papers.
hi dear, for lcds without backlight not have this problem yet
Heating the screens do a much better job than doing this (in which should be obvius in itself). Now because of that, you create a much higher risk for liquid damage due to the condensation from the frost
Sar Hamen aapka freezer lena hai
Please connected
What happens if I just my lcd in the freezer? Don't have money for a machine like that
Awesome idea how much those a machine like that cost?
John Lopez more details pls add coco at wechat/WhatsApp 008618126438871, thanks :)
YMJCoco Zhang Thanks I will.
May it will be harmful to the motherboard?
I want to buy the freezer
very expensive
I learn this but where learnings this type glassjng
What is the cost of it and how can I get it in London
Have you had any luck getting one
No not yet
How can i get one
How much freezing maching price in pakistan
I want this machine
How do I get it in Nigeria
Price kitna hai sir
How much this freezer machine cost?
Any other useg of this.. i buy but now useless
Whay machine is this
Эту страну не победить
How much for this machin and hiw i can get
Hi dear, for the best price, pls contact coco at Wechat/Whatsapp/Tel 008618126438871 email youmijia-coco@foxmail.com thank you !
Doesn't it damage the LCD when it cools off and the ice turns into moist?
no. crucial part sealed.
Dry ice consists of no moist it evaporate into thin air
just looks like there breaking it. the screen/digitizer etc.
just the glue lets go at that temperature. instant separation. no damage to lcd./digi I know it does look like it... it's crazy huh
Почему на одном аппарате написано 50 Гц, а на втором 60 Гц? ))
Щёлкает как семечки.Лайк
What is the name of this machine
Price
Easy and safe
How much for this machine?
Cost
What is the price i want to buy one piece!
what the name of this machine?
and what the name of gas?
I need too.
Maraqlı
سلام عليكم كم سعر هذه الجهاز قالع الزجاج
Why they used it ?
how much price
Good yaar Nice Nambar aur training milagi
if you need more details or have better suggestions, welcome discuss with coco. Wechat/Whatsapp/Tel 008618126438871 email youmijia-coco@foxmail.com
when he moves it it doesnt break inside screen ?
Oled display is flexible
how to price this machine
-180 or -150?
Where is reflector
how much cost
Queria saber como eu consigo essa máquina
Can i get a s7 edge lcd display with digitizer
if you need more details or have better suggestions, welcome discuss with coco. Wechat/Whatsapp/Tel 008618126438871 email youmijia-coco@foxmail.com
Price???
Caste ketha
what is name aparat??