There is no limit to the perfection of the device ,the hand of the master is visible in everything!Thank you for everything you do for us )a lot of necessary and useful information!Health to you and your loved ones!Prosperity to you and good signals for katukha)
Every month of two while not in use be sure to check the battery level of the components, especially the ones that have the flashing light. I just checked my pinpointer and it was dead.
@@hexensage196 I bought it used, no warranty I found out later. But it took a charge and works fine. I checked it not too long ago so it wasn't flat for long. The battery is supposedly easy enough to replace and not that expensive. The battery controller shuts it down before it gets too flat. But yeah, make sure to check it now and then.
I know this is an old post. I use a Deus 1 and when I charge the coil the light on the coil is solid but I still get the little flicker in it. This is on a Non HF and non XF 35 coil, just an original old school coil.
Nice one guys, I’ve lived most of these... You should of added the Deus pinch lol... I had another one the other day... Take Care... Best Wishes CMNW 🏴
Good info Garry and Grant, Thank you👍🏻 Now please explain to me how it comes that whenever I am on a pasture with cows, I always get a brilliant sound like a good target sounds whenever I swing my coil over cow shit? Thank you in advance
Thanks for the video, guys. I love your channel. I’ve had no issues with charging, I could immediately visually see how it seats properly. My only real concern is trying to conserve that battery for days when I won’t have access to a power outlet for days. I get 8 continuous hours, which is awesome!, however idealistically thinking, it would be better to be able to spread that 8 hours out for as long as possible. Thanks for your informative videos! Cheerio:-)
WHEN I,M CHARGING MY H F CIOL THE LIGHT STAYES ON PERMANENTLY, IT DOES NOT FLASH TO INDICATE THAT IT IS FULLY CHARGED. ANY TIPS WOULD BE MOST APPRECIATED
Hi, I have bout HF Coils and X35, so wood be very nice to have same ID on all frequency's, I was not aware of this ID NORM option, but I can se that this option is only awailable on the X35 coil and not the HF coils??
Bought a brand new ORX used it for about and shut it off and didn't use it for a week and now when I turn it on it don't do anything. It acts like it's locked up. My coil and Box is changed Up. I guess I wasted $600.00 dollars. Never again buying a XP Product !!!
Watched so many of your videos, really enjoyed them. So today i purchased an XP ORX. I just the light weight. And your videos will all be watched again with the machine at hand. I notice that the dim light on the wireless headphones continues to blink after the detector is turned off. I also try to turn off the phones by pressing the + and - buttons but it continues to blink. Is that normal?
Excellent! 👍🏻👍🏻👍🏻 Great tips gents! Well apart from the single USB cable, I really think you will have a huge amount of trouble updating the devices with a Micro USB connector! 🤔😳🤭
@@Yakena1Small, deeper target quiet often giving iffy signals. Signals from this target can jump over all ID detector scale. When you removing sam ID, you can automaticly notch signals related to this number....
Great video guys and I always wondered about the coil signals when tapping rocks as some of my fields are very flint rocky, will certainly look into the GB Manual settings. Great Giveaway and I have seen this on my Twitter and Instagram but I am not on Favebook so sadly I cannot enter but good luck to everyone else. One thing with the backphones is it does not work for me since I had my major ear op and I have to rest the back bar towards the top of my head sadly, however during the winter I use my WS5 for much more comfort. One question with the WS4 is why is it when changing coils that the Puck does not pre connect as I always have to go into the settings and change it to the coil that is connected to the control box?
You MUST have the WS4's turned on before changing coils otherwise they simply don't know you've changed however that's also how you split a Deus into two machines, remote to one coil & headphones to another.
Gary my ws4 head phones are constantly dead I charge them they work I put them in the case and drive around for a few days with them and try to use them and there dead Is it possible the the on button is being turned on while it is bouncing around in the truck ? and if so why did xp have one button to turn on the ws4 and you have to push two buttons to turn off when it should be the other way around ? I enjoy the videos and your sense of humor my dog goes detecting with me also I finally got her to stop digging up my plugs when I'm not looking thanks.
Hi Michael, It sounds as though your battery is tired, a new battery should sort that, the on/off buttons were done for a reason, turning on is easy with one button but harder to turn off with two simultaneous buttons, why ? it would be very difficult to accidentally turn them off if two need pressing at the same time whereas a single button it could happen.
@@RegtonDetectors Thanks for your response I've had my ws4 charged and out of the case for a week all is well stays charged fine guess i'll just have to keep them out of the case this is my favorite machine it actually fits in a back pack it's the only one I've bought that works as it should
For some reason the HF coil does not always start blinking when charged. The dealer told me XP is aware of this however is not doing anything about rectifying this coil malfunction. Any idea on why this is not being looked at?
I HAVE THE SAME PROBLEM M8, I SPOKE TO NIGEL AT REGTONS AND HE VERRY KINDLY SENT ME A NEW CHARGING CLIP AND CABLES, BUT SADLY THE PROBLEM IS STILL THERE.
Thanks Gary! I enjoyed doing this with you.
Thanks Grant, it's always good working with you 👍
Thanks again!
There is no limit to the perfection of the device ,the hand of the master is visible in everything!Thank you for everything you do for us )a lot of necessary and useful information!Health to you and your loved ones!Prosperity to you and good signals for katukha)
Thank you my friend 👍
Wow, thank you!
Great tips guys, I think that horse thought you dropped a carrot😂
He was definitely trying to get something!
Good call 👍
Every month of two while not in use be sure to check the battery level of the components, especially the ones that have the flashing light. I just checked my pinpointer and it was dead.
Good tip!
@@GrantHansen Usually I don't charge the pinpointer very often and it got away from me during this virus year, but it is charging now.
Great tip thanks
Yep, I've *heard* XP may refuse to replace the coil under warranty if it's dead after full discharge.
@@hexensage196 I bought it used, no warranty I found out later. But it took a charge and works fine. I checked it not too long ago so it wasn't flat for long. The battery is supposedly easy enough to replace and not that expensive. The battery controller shuts it down before it gets too flat. But yeah, make sure to check it now and then.
Done the wrong coil several times, Gary. Don't half throw you until the penny drops🤒
Yes you do feel a bit stupid at the time.
Thanks Grant for the great advice regarding the direction of detection! :-) Greetings from Bosnia and Herzegovina !!!!
Top secret technique that had never been released before!!
@@GrantHansen I think it has its roots in the Middle Ages, if not before! :-D
@@MetalDetectingizBosne Yes! I learned about it while skimming through some ancient scrolls.
Thank you.my friend👍
Great tips , especially that last one.
Excellent video, and thank you very much. I'm just not going to knock my Mi-6 to the ground like that. 😂😂😂😂
Good point 😁👍
No problem 👍
Not sure how many times I’ve had the wrong coil selected. Great vid
You would think we would learn 😁
Me neither
Very good info from Gary and Grant enjoyed it thanks
Thanks Patrick
Our pleasure!
I know this is an old post. I use a Deus 1 and when I charge the coil the light on the coil is solid but I still get the little flicker in it. This is on a Non HF and non XF 35 coil, just an original old school coil.
Nice one guys, I’ve lived most of these... You should of added the Deus pinch lol... I had another one the other day... Take Care... Best Wishes CMNW 🏴
Ah yes, I remember, good shout.
Nice one!
That is a cracking video buddy that will help a lot out
Thanks my friend
Thanks for your support
Thanks guys! Great video with some very worthwhile tips!
Keep em coming!
Andy
Thanks Andy 👍
Our pleasure!
Great video, love these kinds of tips!
Thanks Steve 👍
Glad you like them Steve
Good info Garry and Grant, Thank you👍🏻
Now please explain to me how it comes that whenever I am on a pasture with cows, I always get a brilliant sound like a good target sounds whenever I swing my coil over cow shit?
Thank you in advance
Yes it is the mineral, mainly salt.
@@The-skillschool Thank you for explaining Garry
Thanks for the video, guys. I love your channel. I’ve had no issues with charging, I could immediately visually see how it seats properly. My only real concern is trying to conserve that battery for days when I won’t have access to a power outlet for days. I get 8 continuous hours, which is awesome!, however idealistically thinking, it would be better to be able to spread that 8 hours out for as long as possible.
Thanks for your informative videos! Cheerio:-)
WHEN I,M CHARGING MY H F CIOL THE LIGHT STAYES ON PERMANENTLY, IT DOES NOT FLASH TO INDICATE THAT IT IS FULLY CHARGED. ANY TIPS WOULD BE MOST APPRECIATED
Does it read fully charged on your machine ?
Try a different charger (not PC USB port as they are often lower output).
Hi, I have bout HF Coils and X35, so wood be very nice to have same ID on all frequency's, I was not aware of this ID NORM option, but I can se that this option is only awailable on the X35 coil and not the HF coils??
Correct. Only on the X35. I share your interest for the Hf coil :-)
Great video so i understud the machine much better
Bought a brand new ORX used it for about and shut it off and didn't use it for a week and now when I turn it on it don't do anything. It acts like it's locked up. My coil and Box is changed Up. I guess I wasted $600.00 dollars. Never again buying a XP Product !!!
Watched so many of your videos, really enjoyed them. So today i purchased an XP ORX. I just the light weight. And your videos will all be watched again with the machine at hand. I notice that the dim light on the wireless headphones continues to blink after the detector is turned off.
I also try to turn off the phones by pressing the + and - buttons but it continues to blink.
Is that normal?
Excellent! 👍🏻👍🏻👍🏻 Great tips gents! Well apart from the single USB cable, I really think you will have a huge amount of trouble updating the devices with a Micro USB connector! 🤔😳🤭
Never got a definitive answer on this: Does notch effect depth?
Yes
@@geryfreezone5615 Please explain more...
@@Yakena1Small, deeper target quiet often giving iffy signals. Signals from this target can jump over all ID detector scale. When you removing sam ID, you can automaticly notch signals related to this number....
@@geryfreezone5615 So its not really depth that is lost but more of iffy targets that might be notched out. Thanks!
@@Yakena1 the deeper the target the more iffy it sounds.
So the lower conductive targets will fall victim first.
Great video!
Thanks!
Can you wash the elliptical hf coil with a hose?
Great video guys and I always wondered about the coil signals when tapping rocks as some of my fields are very flint rocky, will certainly look into the GB Manual settings. Great Giveaway and I have seen this on my Twitter and Instagram but I am not on Favebook so sadly I cannot enter but good luck to everyone else. One thing with the backphones is it does not work for me since I had my major ear op and I have to rest the back bar towards the top of my head sadly, however during the winter I use my WS5 for much more comfort. One question with the WS4 is why is it when changing coils that the Puck does not pre connect as I always have to go into the settings and change it to the coil that is connected to the control box?
Same here with the Farcebook thing - I'm not on it, never will be on it, so guess I'm excluded from the Giveaway. Lame.
@@Mr.MFuckingYTchangedmyname Yes it’s a real shame to shut out none FB users and I will never use it either 👍👍👍
It may be worth re flashing to the latest software.
@@The-skillschool I will try again but for some strange reason it’s always been this way even after all the different updates over the years?
You MUST have the WS4's turned on before changing coils otherwise they simply don't know you've changed however that's also how you split a Deus into two machines, remote to one coil & headphones to another.
Gary my ws4 head phones are constantly dead I charge them they work I put them in the case and drive around for a few days with them and try to use them and there dead Is it possible the the on button is being turned on while it is bouncing around in the truck ? and if so why did xp have one button to turn on the ws4 and you have to push two buttons to turn off when it should be the other way around ? I enjoy the videos and your sense of humor my dog goes detecting with me also I finally got her to stop digging up my plugs when I'm not looking thanks.
Hi Michael, It sounds as though your battery is tired, a new battery should sort that, the on/off buttons were done for a reason, turning on is easy with one button but harder to turn off with two simultaneous buttons, why ? it would be very difficult to accidentally turn them off if two need pressing at the same time whereas a single button it could happen.
@@RegtonDetectors Thanks for your response I've had my ws4 charged and out of the case for a week all is well stays charged fine guess i'll just have to keep them out of the case this is my favorite machine it actually fits in a back pack it's the only one I've bought that works as it should
Great video guys!
Thanks so much!
Presentation show grade 10
Would love to see more tips video. This one really helped. SB
😎👍
Thanks Johnny 👍
For some reason the HF coil does not always start blinking when charged. The dealer told me XP is aware of this however is not doing anything about rectifying this coil malfunction. Any idea on why this is not being looked at?
I HAVE THE SAME PROBLEM M8, I SPOKE TO NIGEL AT REGTONS AND HE VERRY KINDLY SENT ME A NEW CHARGING CLIP AND CABLES, BUT SADLY THE PROBLEM IS STILL THERE.
@@keithhollinhead6283 Try a different charger & see if that helps.
Signing up to the newsletter doesn't work :(
Особенно понравилось в каком направлении начать поиск на незнакомом месте 👍🙂
Brilliant video 🤙
Great video guys
Signed and liked :)
Thanks Donna
Nice
Great video
интересное видео
Cześć GARY
Интересно.
👍 i enjoyed your video 👍
О чём он рассказывает? Кто подскажет?
В основном как юзать (в т.ч. аксессуары), чтобы не повредить и не сломать.
@@hexensage196 спасибо.
раз два три четыре пять! Пора ДЕУС раздавать!
Блин, на Российский рынок вышли, а Великий могучий не выучили.
Интересно цена щас какая ?
На новый год будут подарки ??
I don't do FB....never have....never will.
Норм.
👍🤜🤛💪🎅