Straight to the business, you so helpful thank you. One sugestion care you give a couple suggestions on things if you put too much transmission fluid, power strreening, or brake fuild. i cant see where the brwake fluid need any cus its milky not see thru, in chevy trailblazer 08
My thermostat housing had a little bit of dried blue threadlocker on it from the bolts that mount it down. Is it ok that I didn’t clean off all the dried up threadlocker? Tried to get some of it, but it was stuck in some of the crevices of the housing
My thermostat came out with long piece sticking out and not towards engine,new one goes in same way,won't go in with long bit facing in,hits against inside.Is this ok or not? Car is 2007 Nissan presage.
I seen other videos put the thermostat pin at the bottom 6 o'clock position, what's the difference at the top 12 o'clock position? I'm confused & which one is correct?🤔
its hammer time! tap lightly on the housing. if housing is removed but thermostat stays on, use what ever it takes ON the thermostat only. thermostat is being replaced so how it comes out doesnt matter.
I have a question for you. My aftermarket thermostat came with the housing . Now I can't move the jiggle valve on the thermostat ( my understanding that this need to be positioned 12:00 however I can't change or rotate the thermostat - the jiggle valve Is currently sitting at 5:00 on my car. The part says it's compatible with my vehicle... It's definately on the right way. It takes longer to open the jiggle valve however it still opens as I can feel the lowe radiator hose for heat / cold
very excellent at explaining all your videos 😊
This video provides biggest bang for buck.
Love yalls channel, made a Playlist and shared many of yalls vids to friends and family over time, appreciate the uploads
That was some smart information thank you so much I really appreciate
Very thoughtful I appreciate the break down. It’s not available in the Haynes manuals
Straight to the business, you so helpful thank you.
One sugestion care you give a couple suggestions on things if you put too much transmission fluid, power strreening, or brake fuild. i cant see where the brwake fluid need any cus its milky not see thru, in chevy trailblazer 08
I watched 3 other vids and none said a thing about the steam hole location up, thanks for the confirmation
Great stuff! All the important stuff others forget to mention 👊
Thank you sir i was unsure whether to remove the black piece
Thanks. just posted my thermostat replacement video.
Great clearly explained vid, thanks!
Thank you so much!❤
THANK YOU VERY MUCH BUDDY
Great help bro
On my 2013 Ram 1500, there is no seal on the bottom of the housing. The seal is on the thermostat itself. Thanks for the video
Awesome info! About to do mine in the driveway right now! I have the housing type!
I always grease my seals before installing, idk if it helps any but it helps me feel better
I always grease my penis.
Thank you man ❤
Thanks for the info,🤜🤛
👍 good informative video
Thank you
Thks for those good tips👍🏼
Can I remove the thermostat complete ?
Good advice
My thermostat housing had a little bit of dried blue threadlocker on it from the bolts that mount it down. Is it ok that I didn’t clean off all the dried up threadlocker? Tried to get some of it, but it was stuck in some of the crevices of the housing
Might be dealing with that right now
Thanks
Great.... I didn't replace the gasket seal...
Mine looked brand new and still no leak so it’ll be fine
Super useful
Something I would add is to measure the screws when you take them out.
Good info!
My thermostat came out with long piece sticking out and not towards engine,new one goes in same way,won't go in with long bit facing in,hits against inside.Is this ok or not? Car is 2007 Nissan presage.
Thanks! I guess I installed it upside down.
God bless
Why do you need to put the hole at the top when you in stall it
How much do u know abt nissan b12 ? Need ur help
What happens if you dont have the jiggle valve(the hole) pointed up?
I seen other videos put the thermostat pin at the bottom 6 o'clock position, what's the difference at the top 12 o'clock position? I'm confused & which one is correct?🤔
I've always saw its top 12 pos.
Cool.
Can u out I jb welb on the house to hold it together?
I tried JB weld before and yes it does work.
🔥 🔥 🔥👍👍👍
I clicked on those thinking I might learn a trick. Obviously this video is for
What if your car temperature is Normal then suddenly changes to cold and temperature gauge go's up What will be a problem?
Don't drop the new one like I did they break super easy 😆 🤣
we jus replaced the old one with a new one an it still leaks
Heat treat spring and it wont fail
P21800
Dihhhhhhh.......😊
idid forget in mine but i put hella silicone lool so it didnt matter
What would happen if the hole is not on top??
Same wondering here too just finished putting everything back and I can’t even remember if I put it the right way so that the hole is on top lmaoo
@notthatguybuddy7984 it's OK I drove my car over 100 miles n it's fine don't forget to burp the radiator
What if your thermostat is stuck and wont come out?
its hammer time! tap lightly on the housing. if housing is removed but thermostat stays on, use what ever it takes ON the thermostat only. thermostat is being replaced so how it comes out doesnt matter.
I have a question for you.
My aftermarket thermostat came with the housing .
Now I can't move the jiggle valve on the thermostat ( my understanding that this need to be positioned 12:00 however I can't change or rotate the thermostat - the jiggle valve Is currently sitting at 5:00 on my car.
The part says it's compatible with my vehicle...
It's definately on the right way.
It takes longer to open the jiggle valve however it still opens as I can feel the lowe radiator hose for heat / cold