Incompetence Loses Me Customers
Vložit
- čas přidán 22. 08. 2024
- link for Tradify free 14 day trial bit.ly/4e3wp2P
Get 10% off Rhino Trade Insurance using code BUNDY10 at www.rhinotradeinsurance.com/quote
Amazon store front www.amazon.co....
Ansell gloves i wear www.youtube.co...
Use code BUNDY25 at unilite.co.uk/... for 25% off
Use code BUNDY10 at www.expertelec... for 10% discount
Join this channel to get access to perks:
/ @nbundyelectrical
This video is for entertainment purposes only and is in no way intended as a guide or 'how to'.
What you are looking for is a vertical milling machine, whatever you do do not use your pillar drill as the quill the bit that holds the chuck and allows it to be lowered is not designed for lateral movement. Unless you fancy dodging flying metal do not attempt to push the item through the machine they need to be fastened down securely millers have moving tables to allow you to secure it and move the work into the cutter. An alternative is a horizontal miller but the cutters tend to be far more expensive.
As the surfaces are all flat, Nick could also use a shaper but again, lot of money.
I watched a panorama programme about Adhd assessments at private clinics being a bit keen on diagnosing and medicating
They're in business to make money. They'll say whatever they need to too get you to speand your pennies, or should I say ££££
Tbh its so hard to switch off nowadays we're constantly connected and being fed information. Makes it hard to focus on anything, even without a diagnosis!
Really interested in your ADHD story, Nick. I'm 63 and was diagnosed with ASD a few years ago with 'probable' ADHD, but the NHS waitlist for adult assessments is so long that I'd be in my box before I get to the top of the list.
The verve - the drugs dont work 😂😂
Will echo everyone saying you need a Mill/Milling Machine with a 6degrees of movement workbed for the piece - you can get 'cheapER' ones that are operated manually, or ones with a CNC component that allow you to dial in the movements/have pre-set programs for what you're talking about & will help you square off the material.
They're not so much used for "polishing" though - You may want to have a hunt round all the Smithing/Metalworks' CZcamsrs in the UK/Area of England you're in & see if anyone of them have one and will let you have a play around so you can check if it does the thing you're looking to do - the operation in the Mill you're talking about is more used to flatten the material/'square it off' across the face(s) of the piece of metal you're working on, polishing tends to be more of a grinding operation whilst you work through the grits to get the finish on the material you're looking for. Again, metalworking/Smithing channels would be a good shout.
(Would avoid Alec Steele IMO though, he's definitely the biggest in terms of following but has a habit of making sure that the video(s) would do a LOT more business for a lot less work for *him* than they do for you if you were to arrange a Collab - just my 'IMO' bit there though, you work with creators far more than I ever will as a fan so would be able to find out better than I could)
Also, tiny hint/tip for when you're quenching the ingots - its likely to never be a problem but when you put them in the water try to move the block around/agitate the material a bit - due to the heat difference between the block and the water a steam 'jacket' can form around the outside meaning the cooling isn't even across the material.
As its a copper block to be used for a paperweight the odds of it ever being a real problem for you are slim, but it would be a right bastard for a chunk of it to fly off when you do get to the point of Milling/Grinding etc. due to how the material cooled, sort of a 'best practice' thing rather than 'you're fucked if you don't do it' issue I suppose 😂.
Great to see your ADHD journey as an adult too - far too many people of my generation (born in 1985) & the 10yrs or so after are in that boat of we were told as kids it either wasn't real or was some kind of 'failure/thing that was wrong with you' as opposed to just something that you have and can manage - a pal of mine got assessed and confirmed he had it a few years back and the difference in focus etc. for him now is night and day & our biggest chat was 'what would he have been like at School/exams etc. if he'd had this support 20yrs ago?' so really good to see you being so open about to encourage others to be! Have a good 'un!
I've been thinking about doing a few pours myself but i still got to get all the kit. looks like a really satisfying hobby when they come out good. you'll have to do an update video at some point & let us know how you're getting on with it all.
I would take the ingot to your local machine shop a get them to mill it for you, wouldn’t cost much and a lot safer
I’m so glad that I know of someone else that knows that B&Q stands for Block and Quayle. When I first started work, I said it when it came up in conversation and everyone just looked at me like I was crazy.
The machine your looking for is a milling machine 👍
Mate, you are fine as you are! Most people would like you just as you are.
Absolutely agree with @royhorn. We all have problems and Big Pharma is pushing to put us all on medication. Big business
You’re raising kids, long days, juggling a business, gym and being a CZcamsr - you’re doing and expecting too much from yourself.
Taking drugs that are known to be addictive and have side effects is not the way to go. Before you pop, investigate what are the side effects, when do you stop and what example are you setting to your kids.
Pills don’t make you healthy
Stick to gym, finding time to chill, eat healthy and ditch the energy drinks and takeaways.
What you're looking for is called a mill - and they're not cheap.
You can get a milling table to attach to pillar drills.. but don't. Drills are not designed to be mills - you can get away with it for engraving and very light milling on plastics and softwoods, trying to actually machine something sticky like copper is inadvisable. Drill chucks and the quill on a drill press are not in any way intended to take side loads.
Vertical mill Nick. great video. 🏉Wrong shaped balls btw !
There's a place about an hour from Stafford called "The Machine Shop" nr Hinkley. They operate a workshop you can pay for the month or just the day for all their tools, a milling machine included. And they have all sorts of tools for working on bikes too. And finally Bob is great, I did a 4hr learn to weld session with them a couple years back.
Speak to the machine shop in Hinckley.
Bob is a legend.
Has a mill . And loves the social media shite
Look into side affects of the medication I was medicated for 15 years and have recently stopped at the age of 30 enjoy my life so much more now
Iv looked at lathes and what not for similar reasons not cheap but you can get a vice the moves like a milling machine under a pillar drill just might be to much for the drill depending on how powerful it is will need to be bolted down and you will want something to block swarf or maybe a cheap option is a band saw to shape and belt sander
The thing with ADHD meds, you can decide for yourself when you do and don’t want to take it. Most people take it some days when they need to be more organized, and others skip it when they want to be more creative.
You tube is full of channels where creators are filming while driving and commentating, driving instructors/taxi drivers/coach drivers/lorry drivers/ I follow an underground train driver, his camera gives a drivers eye view while he explains about the different light signals and speed limits.
Spotted the drain addict walk!
Enjoyed the vid! Glad that you've been formally diagnosed so you know for sure now ❤️ hope the meds help!
I'm taking this as an instructional video to phone you instead of sending texts 😆
lol sorry dude , u okay for Tuesday?
@@NBundyElectrical haha it's all good, sounds like you've not caught a break this month 😆
Tuesday is perfect 🙏
I’ve not long had my ADHD diagnosis as well, my executive dysfunction was out of control! I’d work had to get the jobs, plan everything, get the jobs done….but when it came to putting in invoices, I hit a block and just couldn’t do it! Ridiculous, as that’s the part that gets me paid! I’ve tried everything to help me get my admin done, but it’s always a struggle!
Medication has made a massive difference! I can’t believe I’ve lasted so long without having it!
Hope the titration goes well 👍🏻
It’s so bizarre that I’m exactly the same with invoices 🙃 I thought it was just me 😂 looking forward to seeing the results 👌
You need a secretary Adams Mum Available 😂😅😊😂😅😊
Never get any work done with her around mate
good luck with treatmentit makes you feel better Just hope wedont lose the Nick we love PS happier you are not driving
You could make a router skid out of ply that would probably do the job. Not sure how router bits will do on metal though.
@4:57 Doing an Oliver Parker from @DrainAddict swinging arms walk
Knew i recognised that walk.😂
The email thing could well be down to the ADHD, my wife is a psychologist and this is one of her big identifying factors, some people are great at certain things and can do certain things until they are done, but with others, it just takes so much more effort and to avoid that find something else to do.
I work in design and project management of electrical projects and I’m a nightmare for ignoring, missing, delaying emails - especially when the project is complete.
100% the same always suspected but as i dont have any issues with getting work im just accepting it atm....
No expert at casting but I would have thought if you get the mould very hot before you pour then you may get a better quality ingot. Ultimately you could have your logo in the bottom of the mould
Good luck with the treatment nick
The ADHD is showing in you when your explaining about the copper melting and milling machine giving loads of details and all the hand movements 🙃
The back of the van looks fantastic, as for not recording while driving I have to say I always feel uncomfortable when you tubers do it. I think it's very positive you talking about your looking into mental health issues and sharing.
Milling machine would be the tool, though maybe you have ingot moulds made custom with your logo instead of milling them all?
I was given the ADHD diagnosis at age 50. It was a revelation, and explained a lot about my childhood. Of course, when I was a child, there was no ADHD. I was just an arsehole and they tried to beat it out of me. Naturally being me, I dug my heels in and became an even worse arsehole. And on and on.
If you have the resources, invest in EMDR therapy. It changed my life, and gave me a toolset to deal with my behaviour. Mostly.
Good luck.
Why don't get a mould made up for your melted material...As for tax returns, I used to do my own and get stressed out x2 a year, I didn't get an accountant as I was, 1) saving money, 2) prove I can do it, and 3) SAVE Money. Eventually, I got an accountant, and they saved me further cash, so it sort of paid for it's self and took the pressure off me. As for the ADHD if do what you think you need to do.
I remember use the old brown and Black junction boxes ,but now I think is not allowed.....
3:02 £600!! I thought y’all had government healthcare over there. Granted it would have another 2 zeroes on it here…
Although we do have free health care via the NHS due to the long waiting lists for assessments etc, many may choose to go private.
@@Zycton ooooh gotcha.
I’d buy one 👍🏻
Mate don't take the medication, you don't need it
Stay off the chemical cosh!
I assume you'll be prescribed Elvanse for your ADHD. I would highly recommend taking it with a source of protein and if you run into circulatory issues (feeling overly cold) due to the vasoconstriction effect get some powdered beetroot, works amazing.
That’s how it all starts, synthesis everything, so it over loads you.
Have you done a review of your Kewtech tester that I may have missed please?
Having been a badly behaved - hyperactive kid growing up in the 80s, to it developing into ADHD in later life and being more refined / defined.
I’m passionate about it not being a diagnosis. It’s not a disorder, it is not a disability. It’s normal.
It’s just that civilised life tells you to fit in you are now different to how the world expects you to fit in. But every autistic and adhd even Tourette’s are just normal people.
But now they’ll throw medication and treatment at you to try and “normalise” you.
But that may make the adhd acceptable, but in the long run, it’s mind bending drugs that will affect you by other means and deteriorate other organs.
So I urge you and anyone, just to accept it as normal rather than a diagnosis that they are trying to get you to believe you are different and can’t survive in life.
We all subscribe to you cause of who you are currently. So just be you!
Edit: yes food stuffs, and metabolism is a huge factor. Cut out anything that is synthesised. And pointless meds like cold n flu stuff etc. even paracetamol when you don’t need it.
hey nick just wondering what pz2 bits you use? looking to get some myself
Armeg ones mate
i have a place perfect for this sort of metalwork project :) not sure where you are based but there are places called Hackspaces or Makerspaces which have these tools AND for the cost of a gym membership (£10-15 a month) some Have 24/7 access ! im based in Nottingham and my local space is Called Nottingham Hackspace.
Nottingham Hackspace is one of the biggest Hackspaces in The UK, Which has Metalworking, Wood working, electronics, 3D printing and even Some Laser cutters and CNC machines :) as well as small milling machine and a Bridgeport milling machine more than happy to show you around some time if your in the area ?
£600 to tell you that mate , i would have done that for £300 , happy days all round , don,t let the meds change you
Don’t take meds, short term gain, long term pain!
Your gonna find it crazy hard to finish the copper your smelting , machining copper is crazy hard on machines and tools , are you putting any flux in or just copper ? Also let it cool naturally don’t quench it by dropping it in water
Sorry nick il honestly say I thought the title said impotence looses me customers. I thought you'd lost work to another guy from Adam's mum 😂
@15:40 I think it's a form of procrastination mate, maybe unconsciously overwhelmed by taking on a new job. Curious to know what type of medication you're on. I'm pretty sure I'm ADHD, many aspects of it I actually love, but for me it's the anxiety and social anxiety.
Your looking at a mill m8 dont use pillar drill so so dangerous nip to an engineering workshop or even someone who machine's engines buddy that surfaces cylinder heards and they will surface it for ya pal also casting will not remove the voids as its not forged so if you wanted to yoou would have to heat it up and apply pressure to allign the grain structure budd but a decent engine machine shop would donit also its not precision so dont need to set it up like u woukd doing a cylinder head buddy
20:09 you tried air up?
Would be good for you to do little updates on the videos as you come to terms with the ADHD diagnosis.
I got diagnosed with ASD when I was 35 and it explained why I found so many normal life things so difficult over my life.
Would be interesting to see if it's the same for ADHD
Please don’t do that by hand it won’t end well
I wouldn't take the pills mate. Sorry.
Why would anyone want a Nick Bundy ,paperweight....u r known 2 sparks and diy,s .. not yet a household name yet buddy 😅
They have rts or if lucky mice.
Loved the vid - love you as you are!
Why don't you hire a part time admin assistant to do all the stuff you don't like doing or find difficult because of your ADHD. Stuff like replying to emails, making appointments, accounts TAX etc. Shure you could manage to get someone in to get rid of your backlog once or twice a week.
Gets diagnosed with ADHD within a few weeks of getting half a pallet of Monster for free. Shocker!
What's next, find out you can only swim in circles when you've only got one leg?
😁😁
Good luck with the tablets mate 🙂
Can’t you treat yourself without tablets,,😮 stay happy feller
Are you eating at that place?
Hate to say this but £600 and a short zoom call for an assessment is almost certainly a scam, a proper assessment is at least 3 hours face to face.
I think just watching this video is enough for a diagnosis 🤣
Most stereotypical ADHD. Electrician, CZcamsr, smelting metals for a hobby, constant stimming, and covering like 5 topics at a time. ADHD. 🤣
Do you need a apprentice? I can work with you every day for free even just for experience. Keep up the good content
I think your beating yourself up a bit mate, it just shows your human
Nothing wrong with filming while driving as long as you're not distracted. No different than talking to a passenger.
If your taking medication for ADHD you may have to tell the insurance company for your business and for your vehicles also you have to inform the DVLA as ADHD can cause distractions while driving. Shouldn't affect things too much.
The medication is pointless your fine
why are you so keen for tablets, iv seen how these type of meds change people
Mine have helped me a huge deal, and I still feel myself, just more focused and calm.
Never take tablet alter personality it’s like bipolar which id say I have wouldn’t take meds for it personally think anything like that is personality and people just put label on it. Is there meds for normal person ? Anyways think some will understand my point whatever makes person comfortable suppose just my opinion.
We are all probably on the spectrum. Definitely wouldn't be taking medication to alter who you are. Everyone is wired different.
Stop rambling.
Decide what it is you want to get across to the viewers.
Maybe after the tablets you might answer my email
Not surprised the doctor you paid £600 agreed with you 😂😂