How to Replace Upper Control Arms 2004-08 Ford F150
Vložit
- čas přidán 10. 08. 2020
- Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ib/1ASFU00077
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2004-2008 Ford F150.
• Check here for more videos on the 2004-08 Ford F-150: • Ford F-150 2004-08 11t...
This process should be similar on the following vehicles:
2004 Ford F150 Truck
2005 Ford F150 Truck
2006 Ford F150 Truck
2007 Ford F150 Truck
2008 Ford F150 Truck
Tools you will need:
• Pry Bar 1aau.to/ogv/1AXAA00020
• 15mm Wrench 1aau.to/ogV/1AXAA00010
• 21mm wrench
• 15mm Socket 1aau.to/oxf/1AXAA00015
• 21mm Socket 1aau.to/okf/1AXAA00043
• Straight Cutters
• Ratchet 1aau.to/ozk/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oxf/1AXAA00015
• Torque Wrench 1aau.to/oo9/1AXAA00044
• Copper Anti-Seize
• Rust Penetrant
• Floor Jack 1aau.to/ohn/1AXAA00068
• Hammer 1aau.to/ogx/1AXAA00091
• Jack Stands 1aau.to/ogJ/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford F-150 2004-08 11th Generation: • Ford F-150 2004-08 11t...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I'm looking to getting cordless impact WRENCH any recommendation? Budget friendly
Why can't all videos about working on vehicles be like this, great job, saving for later
Throughout this video I’ve had to run to the hardware store several times to get this done 😂
Thank you for this video . I replaced the upper control arms and struts and it went flawlessly. Keep the videos coming
Well done video! Very clean, clear and quick directions!!
Good work! Thanks!
This has to be the best straight forward video on CZcams..good job sir and thank you 🙏
Thanks for the video l did it myself and saved alot of money from the shop, was encouraged by this video, thanks again.
Seriously quality video, thank you for sharing your expertise.
Great explanation. Great video. Will watch more of your videos.
Very thankful for these videos.
Thx a TON TRQ! My drivers side boot around the ball joint was torn and starting to get hazardous. Installed today, off for alignment tomorrow! I’ll have my mechanic double check my torque tightness too just to be good.
+Christopher Caldwell Thanks for watching our video! 1aau.to/m/Shop-TRQ
Thanks for the video , straight forward
These videos are so damn good.
That was great video. Just what I needed thanks
I wish it was that easy, lol. Your 15 min was my 2 hours lol
Lol I’m getting ready to do this and Was that with just you or with a buddy
Awesome video I just replace the structs on my 2007 ford f150 stx
Fukn love that impact sound 🤗🍻
Great, great vidéo, thank you!
Great job!
That's a great video 👍
This was excellent much better than the other I just watched. She made it look difficult.
+@reeco357 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Great video
What is the torque on the 3 top nuts on strut?
Excellent Thank You.
What do you if your top strut nut is just spinning while you try to loosen it? I tried gripping the piston below with some channel locks but it still just spins. Im trying to finish this today since I have to be at work on Monday so any help is greatly appreciated.
Best videos ever
Very good bideo thanks
By far you are the smartest guy showing how easy this job is Thank you . I can not say the same for the cat over at OPR who was removeing way to many components than necessary thanks guy I don't think so remove the brake caliper remove the knuckle no lets do 10 times more work the only knuckle that needs to removed is you duh knuckle head.
I was always told to have the weight of the vehicle ON BEFORE torqueing the lower control arm bolt to 315...this was not apparent in the video..correct me if Im wrong
Do I need to preload before torquing the control arm?
So what if I don’t use copper anti seize? And what if I use the sliver one instead?
Do you have to remove the strut?
Fácil y rápido 😃👌
Great video very well done I love how you give the torque specs for each bolt but I didn't catch the torque spec for the nuts holding the top of the strut assembly I think you missed that one.
Right
I believe the torque spec for those bolts is 35 ft lbs.
How much torque is needed on the upper strut bolts?
Great video! I'm guessing that truck spent most of its life up north. Serious rust problem. 😳
+Keith Duclos Thanks for the feedback! 1aau.to/m/Shop-TRQ
Holy rust !
+David W. Thanks for the feedback! 1aau.to/m/Shop-TRQ
Lol
Looks like they got a new shock, tie rod, and a control arm.
Rust "Pure Michigan" I live in Michigan this state destroys vehicles!
Question , after I did exactly what you did would I have to take my truck to get a wheel alignment or am I good just driving it after replacing the control arm ?
+Z Ab It is always recommended to get an alignment after replacing any suspension parts.
Your awesome
Can I use 4wd control arms on a 2wd ?
For those wondering, same process for 4wd models. Axle doesnt have to come out
Do you need to do an alignment after replacing the arms?
+Camaro Jay It is good to check your alignment afterwards
Will this be any different on a 4wd model
There's no front axle to deal with, which makes shock removal a bit easier.
How many hours of work for do this job
What do you torque the 3 top strut nuts to?
35 foot pounds
Wish I could this to my veracurl
How must would this part and labor cost me?
Anyone have thoughts on him tightening the upper control arm bolts before letting the weight sit on it? Is eyeballing it so that it's pretty much level with the ground good enough? Certainly would be easier to tighten it before putting the strut back in
I too noticed this, im a huge advocate of preloading suspension.
Is this 2 wheel drive ?
Forgot the top shock torque lbs.. if you could plz let us know
In another video is said 35 ft lbs
Only difference I would have done was thread lock after bolt in. Never seize before but the lock could just come off in bushing
How long should it take a mechanic to do this job? A shop quoted me for 2hrs labor.
2 hours of labor is exactly how long it takes
+Dj salty nuts Thanks for the tip!
my 04 looks nothing like this
The amount of rust on that truck is insane
Do I need to buy the arm or can I just buy the ball joint? Sorry I'm new to this 😅
+SenpaiiMax You can just buy the ball joints instead of the control arms.
You have to press the ball joint out and in, which is quite sketchy without a safe press (caged) to operate.
Don't forget to get you a alignment
Where was the axle??
2wd maybe?
You forgot to add the 30ml socket on the tool list
So WTF I never seen the cv axel the entire time, what a gravy job without having to deal with that.