I made S13 Pop Up Headlight Motors Work Without The OEM Harness!! DIY
Vložit
- čas přidán 25. 08. 2020
- * It has been brought to my attention that some of the headlights may have different style boards. follow the lines on the back of the boards and that will tell you where the wire should go*
This took a bunch of research to figure out so if you enjoy it please leave a comment and a like. The is probably the coolest thing i've done so far lol
Relays:
amzn.to/3gsHc7E
Double Pole Double Throw Switch:
amzn.to/2QnFBFG
15% off everything at:
www.stickerboost.com/ref/Futu...
use code "futures7" at checkout
follow me on Instagram @fso.media
please like, comment and subscribe to follow the only offroad 240sx on CZcams!
This video contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission. - Auta a dopravní prostředky
I was searching for a solution to electricaly open and close the led bar cover in my truck and your wiring gave me a very good starting point. I even think you can turn the lights on and off with that same switch without much of a hassle since you already figured out how to rebuild the most complex part of the circuitry.
Thanks for sharing, your video gave me a insight how to finish this thing that have been bothering me for months. In my country it's illegal to drive on road with uncovered led bars and I'm just to lazy to get off the car in the mud or rain to open it
Badass video man. Thank you for making it and being so thorough. Nice work on the lights and videos.
Good stuff. My s13 pop ups havnt gone down in years. Was going to figure it out eventually but you did it for me. Great content
Thank you for watching! Glad it could help you🙌
Your video POPPED UP me an idea how to do POP UP lights with power window motor! Nice video!
Legend.Thanks for all this info!
Dude this is awesome. I was about to tackle this myself, thank you for saving me an ungodly amount of time!
👌👌
Hey man love your 240sx wiring videos they’ve helped me so much, just got my rear lights all working last weekend thanks to you! Now I’m onto the front, What size of wire did you use for the two power wires? I built a harness for them last night but it’s all 16 gauge.. thinking I may have undersized?
I used 14 but 16 should be okay. Factory is either 16 or 18 for the headlights
Nice might actually have to try this on mine once I get the car running first and learn how to solder a bit more
I have very very little solder experience lol it's a good way to practice. You already got the whole chassis wired up so this should be pretty easy for you 👌
FSO Media very true waiting on the rest of my parts to come in so I can get more content up, and that would be apart of it but over nicely done brutha 👏🏾
would it be possible to tap the headlight on switch into the up circuit to make them work as OEM?
might be a fix that works in order to get everything working with OEM controls.
i am a bit at a loss... why did you do all this when the popup oem harness already provides you a simple solution: one wire to open and another one to close it !?
I'm about to tackle the same on a few fb rx7s. Have the harnesses, but the relays are the not around anymore
I dont even have a s13 and this was entertaining
Lol I appreciate that 🙏🙏
hi can you look at the diagram from a 91 pontiac firebird with the automatic pop up headlights after converting my 91 to 84 for the kitt replica the 84 headlights have 6 wires where the old 91 only had two i think the 91 got the relays on a board installed by the firewall where the 84 have the headlights motor relays on the headlights motors therefore more wires any idea how to hock it up got the down to work but the up is not working
not how my motors for headlight popup works..??
I made it only 1 5 pin relay and a on/off switch :)
But if it works for you, fine :)
So couldn’t you just tap into the motor harness wires instead of taking them off the motherboard and then replacing them?
I’m about to do this myself so just curious if I have to take the motors apart or could I just use the stock wiring and internal relay!
I must be dumb, i dont understand shit 😕