Can we give some big respect for Novritsch, because he actually takes time to address problems that go on with his products. True legend right here. Mad respect.
@@EyeOfArcadia Thats like saying "Microsoft should release Windows without issues!". Pure bogus! Tech and mechanical object need MAINTENANCE!!!! Especially airsoft products. Parts will wear and tear over time. For instance, a car. It needs a MAINTENANCE check from the dealer every X amount of time. You need to air your tires every X amout of time. Its called MAINTENANCE!!! i had to fix a goldmatch mag today. It just takes work to maintain it. Its not a problem, it works by design. Not all consumer products work wothout maintenance for 100 years. a especially airsoft!!!!!!!!!
@@chef7658 i currently have a piece of tape covering my mag because the hammer no longer strikes it. Its just a shotty product man. You can get better consistency just buying a drum mag
I'm extremely grateful that you put this video up! I normally do not even comment on any channel whatsoever, but I had to give a shout out on saving me a lot of time, money and sheer frustration! LOL!I bought a key and silicone lube I was able to fix my magazines without a single hitch! Thanks again and God bless!
Thank you Novritsch, I have been struggling with this problem a while with my CO2 mags. I bought a new valve, and eventually a new mag but they both had problems. I tried tuning the tightness and everything i could think of to get this to work, i think greasing the crap out of the ring finally got it to seal on both mags. I love the ssp-1 and im hoping I'll actually get to use it more now.
In contrast to gas you should release the CO² when storing the mag. Before you use it again, grease the orings like shown. Sometimes when mags are new the only need some silocone grease to seal.
Thank you so much for your video there are not many out there that shows the CO2 taken out of the magazine cleaning and releasing pressure once again thanks
I will rephrase the question what was the tool that you used to unscrew the cap on the CO2 magazine and is it necessary because my friend got Me one for my birthday and I do not know if it is necessary or not
I have not been able to find individual parts, only kits which I don't want to buy because I don't need all the parts they want to sell you. Do you know someplace where separate/individual parts can be ordered ?
Hi Novritch! I purchased a SSP1 about a year and a half ago and I decided to also purchase an extra mag for it. When the pistol arrived I loaded the mags with CO2 and the mag that came with the gun sealed amazingly and didn't leak at all. The spare mag on the other hand leaked most of the CO2 out. What confused me was that the CO2 leaked out at the bottom where the cartridge goes in. I tried again and I was able stop the leaking sooner by tightening the nut a lot harder. When I shot the mag, I only had about 30 shots worth of CO2 left in the cartridge. When I went to take the cartridge out, I had had to tighten it so much to stop the leaking that couldn't unsrcew it. I ended up putting it in a vice so I could actually loosen it. I sent your support team an email about the problem and they asked for a video. After sending a video of the problem they said to tighten the CO2 nut faster. The thing is, I'm tightening it quickly. And like I mentioned before, I had to tighten it way past the point the other mag (that came with the gun and seals perfectly) needed. I've watched just about every video on CZcams about your SSP1 magazines and HiCapa magazines in general and have not come up with a solution. I kind of just gave up after your support team didn't offer much help. Since then I have just had the one magazine to run which doesn't make games very fun and it has also made me dislike airsoft a little bit. I love my SSP1 and have contemplated getting another mag for it but I'm afraid the same thing will happen again. So since I don't have money to just buy things that I can't be sure about I haven't purchased any more magazines. I am also slightly disappointed with your support team since I have heard good things about them. Thanks for reading this and I hope you can help! UC2 Studios
Hey Novritsch, please fix the ssp1 mags, the quality control sucks, they leak right out of the box, at 30 bucks a pop we shouldn't need to rebuild the damn things to get them to work, just like the rest of you its very frustrating. I appreciate the peeps that are posting the "how to fix" a leaking mag, Bought many of his items but losing faith in the company. A good company backs there products.
I dont know what happened to my ssp1 but one of my mags was mega leak and the gun like exploded gas lol, i think its a mag issue. My 2 mags can barely empty one mag without running out of gas, thank you for the tech support.
It worked at first , but then I shot it and it started to leak again from the top. Not alot but I can hear the co2 escaping from the top of the mag. I have the crosman pfam9b
Yo I need help does the gun not do very well in 10-20 degree temps when it shots it sounds strong on the first shot but it gets weaker the more shots and it runs out of co2 mid mag
Bros. Please tell me how long I can hold a non used co2 (full gas). It's a separate magazine, so can I hold it for a long with out seal damage ? In all other co2 we can only hold it for 24 hours.
I got a very similar Co2 pistol recently and the gas started leaking so I unscrewed the tank and it shot out, I lost the screw that holds the canister in. Does anyone know where I can get a replacement without replacing the mag, I’m going to get a spare anyway but I’d like to have another one.
Guess I’ll have to get that tool at 1:25 because both of the magazines I bought for my ssp18 started to have that issue where it shoots co2 out the valve after about 2 weeks after purchasing. Maybe if they were a little more secure out of the factory I wouldn’t have had to spend another $40 on a product that would end up having the same issues…
@@swisscheesy1560 I ordered one for 3 euros on aliexpress, saw them on ebay as well. Gonna have to wait a bit but beats not having one at all. Just type in "valve key" and look for one that has 4 different keys in an X shape, one of them will be what we're looking for.
is there no other way to make Green gas magasin its been around for many years now same with co2 always the same leaks and problem its so sad there is new things to make it better
Whenever I try to refill my mag from the top the green gas just escapes and it dosent refill the mag. I have unscrewed the top valve and used silicon from the novritch maintenance kit. Does anyone have any ideas I’m gone be ordering a new valve anyway but is there a way to fix this thanks
Where can I buy that wrench? I can't find it anywhere. This cleaning and oiling procedure worked for my Umarex BB magazine. I removed the inner seal with a large screw driver no problem. It's reverse threaded and it was loose so between that and this procedure, it's working again. Now where can I get that wrench! :-)
@@adamkordula9357 alright so I ordered one of the 3 sided fixers like he has, and did his exact steps and it fixed it, so order one of those (I got the link from a comment on this vid somewhere) and follow his steps
www.amazon.de/ARMY-FORCE-Ventil-Schl%C3%BCssel-Softair-Magazin/dp/B07HCB8CRR/ref=sr_1_13?ie=UTF8&qid=1544192512&sr=8-13&keywords=ventil+key sorry it is the german site
Good instructions as far as they go but you left out a huge step of troubleshooting and fixing the seal between the co2 cylinder and the mag where the piercing needle is.
Can we give some big respect for Novritsch, because he actually takes time to address problems that go on with his products. True legend right here. Mad respect.
I agree
Yup true
Man just don't release a gun with issues
@@EyeOfArcadia Thats like saying "Microsoft should release Windows without issues!". Pure bogus!
Tech and mechanical object need MAINTENANCE!!!!
Especially airsoft products.
Parts will wear and tear over time.
For instance, a car.
It needs a MAINTENANCE check from the dealer every X amount of time.
You need to air your tires every X amout of time.
Its called MAINTENANCE!!!
i had to fix a goldmatch mag today.
It just takes work to maintain it.
Its not a problem, it works by design.
Not all consumer products work wothout maintenance for 100 years. a
especially airsoft!!!!!!!!!
@@chef7658 i currently have a piece of tape covering my mag because the hammer no longer strikes it. Its just a shotty product man. You can get better consistency just buying a drum mag
I'm extremely grateful that you put this video up! I normally do not even comment on any channel whatsoever, but I had to give a shout out on saving me a lot of time, money and sheer frustration! LOL!I bought a key and silicone lube I was able to fix my magazines without a single hitch! Thanks again and God bless!
Extremely helpful to fix my ssp1 gas leak, thank you for taking your time out of you're day to make this Troubleshoot, it helped a lot.
Thanks. I fixed my Beretta 92A1 magazine following your instruction. Thank you.
Thank you so much novritsch you saved me so much money I thought I'd have to replace them your the best
Novritsch you are a beast on and off the field! Thank you so much! Stay awesome!!
Dude I run KJW pistols mostly, and this is super helpful thanks!
lol
Isn't the factory called KWC?
Hat geholfen das Ventil rauschzuschrauben und zu säubern.
Super Tipp danke!!! 🤩
Thank you Novritsch, I have been struggling with this problem a while with my CO2 mags. I bought a new valve, and eventually a new mag but they both had problems. I tried tuning the tightness and everything i could think of to get this to work, i think greasing the crap out of the ring finally got it to seal on both mags. I love the ssp-1 and im hoping I'll actually get to use it more now.
A good straightforward video. Getting down to business right away!
In contrast to gas you should release the CO² when storing the mag. Before you use it again, grease the orings like shown. Sometimes when mags are new the only need some silocone grease to seal.
Thank you so much for your video there are not many out there that shows the CO2 taken out of the magazine cleaning and releasing pressure once again thanks
tighten up the bottom part helped for two of my ssp1 gas magazines thanks!
Thank you. You helped a lot. Very useful information and "lesson". :)
Bro you just saved me some cash, Thank You!
The valve turned out to be all that was needed. Great and thorough video.
Where do u buy it
@@hebuggin3599 eBay.
www.ebay.com/itm/402334276668?hash=item5dacfddc3c:g:jhMAAOSwY-NdpXgx
@@BrainDecrease Thank you, but do they also sell on Amazon by any chance? I don't really know what yo search for
@@hebuggin3599 they're there too. Search for 'Airsoft Valve Key'
Thank you so much!!!
Thank you, this helped so much.
Thanks bruh for the help, cause I had this issue for like a week and I didn't really know how to deal with it
Thank you!
Thank you! very useful
Cool this video helped a lot thx novritsch
Gotta love the nose shot at 8:26
Thanks
This was very helpful thanks
excelent!! thnx novritsch and i bought your sniper :D
I bought the valve key hoping that the magazine would've been a bit lose but no co2 still blast out
I was going to use this as a prop for a short film but now my whole house smells like CO2
I used a screwdrive on the co2 magzin workd great
I will rephrase the question what was the tool that you used to unscrew the cap on the CO2 magazine and is it necessary because my friend got Me one for my birthday and I do not know if it is necessary or not
I was right about to throw out my 1911 clip thanks man
This vid saved my day cuz i’m such a noob that I didn’t know any of this stuff and I thought that my mag was broken lol
Is that valve tool universal for other magazine ? , I have a heckler app& Koch usp. Thanks.
What screw at the bottom of the mag do you use for your green gas mag?
thank you
I have not been able to find individual parts, only kits which I don't want to buy because I don't need all the parts they want to sell you.
Do you know someplace where separate/individual parts can be ordered ?
What size is the hex key that you used?
Hi Novritch! I purchased a SSP1 about a year and a half ago and I decided to also purchase an extra mag for it. When the pistol arrived I loaded the mags with CO2 and the mag that came with the gun sealed amazingly and didn't leak at all. The spare mag on the other hand leaked most of the CO2 out. What confused me was that the CO2 leaked out at the bottom where the cartridge goes in. I tried again and I was able stop the leaking sooner by tightening the nut a lot harder. When I shot the mag, I only had about 30 shots worth of CO2 left in the cartridge. When I went to take the cartridge out, I had had to tighten it so much to stop the leaking that couldn't unsrcew it. I ended up putting it in a vice so I could actually loosen it. I sent your support team an email about the problem and they asked for a video. After sending a video of the problem they said to tighten the CO2 nut faster. The thing is, I'm tightening it quickly. And like I mentioned before, I had to tighten it way past the point the other mag (that came with the gun and seals perfectly) needed. I've watched just about every video on CZcams about your SSP1 magazines and HiCapa magazines in general and have not come up with a solution. I kind of just gave up after your support team didn't offer much help. Since then I have just had the one magazine to run which doesn't make games very fun and it has also made me dislike airsoft a little bit.
I love my SSP1 and have contemplated getting another mag for it but I'm afraid the same thing will happen again. So since I don't have money to just buy things that I can't be sure about I haven't purchased any more magazines. I am also slightly disappointed with your support team since I have heard good things about them.
Thanks for reading this and I hope you can help! UC2 Studios
Try putting a ton of silicon in the magazine on the valve that piercing the cartridge. That usually helps me when this happens.
Same exact thing happened to me. I’m going to try and purchase a new thing that’s screws in the bottom (that secures the co2) and hopefully that works
Hey Novritsch, please fix the ssp1 mags, the quality control sucks, they leak right out of the box, at 30 bucks a pop we shouldn't need to rebuild the damn things to get them to work, just like the rest of you its very frustrating. I appreciate the peeps that are posting the "how to fix" a leaking mag, Bought many of his items but losing faith in the company. A good company backs there products.
Where to get that tool with the two tiny nubs?
6:04 - 6:10 lol :)
Soooooo many innuendos
Lmao
“You can also use a used one and you take it out again until you have enough lube on the rubber seal”
@bojan desmaels The only reason we understood is because we grew up smh
Would this method work for co2 mags for any pistol?
My magazine does the same, where can I get that item??
honestly just have more issues trying to even get past the cap at the bottom. Really difficult to press the metal button down and get it to slide.
thank u
Where can I find the exhaust valves?
I dont know what happened to my ssp1 but one of my mags was mega leak and the gun like exploded gas lol, i think its a mag issue. My 2 mags can barely empty one mag without running out of gas, thank you for the tech support.
Silicone grease is the best option, oils didnt work well for me.
How do you even take the base of the mag off?
It worked at first , but then I shot it and it started to leak again from the top. Not alot but I can hear the co2 escaping from the top of the mag. I have the crosman pfam9b
how many magazines should you be able to shoot with a new CO2 cartridge? I'm only getting about 2 mags. is this normal?
Where can i buy 1 of those tools? I have like 7 or 8 dead sr92 magazines that need fixing
What size orings?
Yo I need help does the gun not do very well in 10-20 degree temps when it shots it sounds strong on the first shot but it gets weaker the more shots and it runs out of co2 mid mag
The thing you unscrew is stripped in mine. How do I get it to unscrew? Please help!
Bros. Please tell me how long I can hold a non used co2 (full gas).
It's a separate magazine, so can I hold it for a long with out seal damage ? In all other co2 we can only hold it for 24 hours.
what if still hissing at the bottom after i did that
i have problem on CO2 mag the co2 cames out around the threaded cap as o tight it up
Does this work if the gas just shoots out of the top as you put it in?
Should work
Does it work for my beretta m9 A3 too?
i tried to fix it many times at the bottom o ring but it still leaks!
what is wrong??? do i need a new mag?
I got a very similar Co2 pistol recently and the gas started leaking so I unscrewed the tank and it shot out, I lost the screw that holds the canister in. Does anyone know where I can get a replacement without replacing the mag, I’m going to get a spare anyway but I’d like to have another one.
I couldn't make it out the name of this tool. What's its name? Where can it be purchased?
I am really disappointed, it still don’t work after I have bought the maintenance kit and now I need to wait 7+ days for a new magazine
What Is the mame of the tool?
Guys is an ssp1 co2 version different with an gas version of it so I can fit an gas mag inside the co2 version of the ssp1
Where can I get that tool
I have a question what tool do you use to put in the CO2 Cartledge
You will get it if you order co2 magazine
Martimos ok
Guess I’ll have to get that tool at 1:25 because both of the magazines I bought for my ssp18 started to have that issue where it shoots co2 out the valve after about 2 weeks after purchasing. Maybe if they were a little more secure out of the factory I wouldn’t have had to spend another $40 on a product that would end up having the same issues…
Do you know where to buy it?
@@swisscheesy1560 I ordered one for 3 euros on aliexpress, saw them on ebay as well. Gonna have to wait a bit but beats not having one at all.
Just type in "valve key" and look for one that has 4 different keys in an X shape, one of them will be what we're looking for.
Does the novtitsch tool work on this
Great video Sir
Can you please tell the name of the tool you are using to unscrew the valve so I can buy it..
Many thanks
I also want to know where to buy this tool or at least tell me the sizes I need
Hello there... can I use WD-40 Specialist Silicone Spray ? ...........
my ssp1 co2 mag still leaks from the bottom, any ideas??
Perfect out of the box....my Harry arse....STAND BY YOUR PRODUCT AND HONOR YOUR WARRANTY.....
is there no other way to make Green gas magasin its been around for many years now same with co2 always the same leaks and problem its so sad there is new things to make it better
my mag leaks from the bottom where i put the gas in and it leaks from the side of the inside
mine seem like it shoot or use the gas to fast i only able to get only about 3 shoots and then it just stop and i have to put more gas in it
Whenever I try to refill my mag from the top the green gas just escapes and it dosent refill the mag. I have unscrewed the top valve and used silicon from the novritch maintenance kit. Does anyone have any ideas I’m gone be ordering a new valve anyway but is there a way to fix this thanks
Where can I buy that wrench? I can't find it anywhere. This cleaning and oiling procedure worked for my Umarex BB magazine. I removed the inner seal with a large screw driver no problem. It's reverse threaded and it was loose so between that and this procedure, it's working again. Now where can I get that wrench! :-)
I found the tool. It's called a "Valve Key". www.evike.com/products/42428/
Hey can someone put a link to this tool to tighten the air thingy
Does somebody know how to exchange the lipseal? Just pull it Out ?
does novritch still sells upgrade parts for other sniper rifles?
* upgrade kits
Yeah he sells tuning kits or upgrade kits for other snipers
Wo kann man dieses Werkzeug Kaufen??
How can I tell if my mags are leaking
Ummm what should I do if the c02 is spraying out of the purple nozzle part of the magazine near the top?
i have the same problem and non of this is helping
@@adamkordula9357 alright so I ordered one of the 3 sided fixers like he has, and did his exact steps and it fixed it, so order one of those (I got the link from a comment on this vid somewhere) and follow his steps
how about on ssx23 mags?
When I shoot my green gas gun gas comes out the back of the gun when I shoot, any ideas? And it only shoots like 2 before it’s out of gas
First time shooting also
Hi there, I have one question. Is ASG ULTRAIR CO2 Capsule compatible with SSP-1? Thanks.
Matus m if the co2 is a 12 gram cartridge, it will fit.
@@1soggodoggo810 thanks it is 12g
what's the name of that tool and where can i get it?
www.amazon.de/ARMY-FORCE-Ventil-Schl%C3%BCssel-Softair-Magazin/dp/B07HCB8CRR/ref=sr_1_13?ie=UTF8&qid=1544192512&sr=8-13&keywords=ventil+key
sorry it is the german site
www.amazon.com/SportPro-Force-Magazine-Charging-Airsoft/dp/B071957DV2/ref=sr_1_4?ie=UTF8&qid=1544192679&sr=8-4&keywords=valve+key
Mein Frage, wenn ich Sie CO 2 SSP1 wähle ist es möglich die SSP1 trotzdem mit Gas Magazine zuspielen?
On the co2 just put Plumbing tape on the threads
Got leaks on co2 mags from the rear screw, the one you turn to put co2 cardidge inside the mag....
Same here, I have no clue what to do...
i live in turkey but there was no one to do what you told here, i solved the gas leak problem by watching your video thank you very much
my co2 cart is like stuck inside the mag and it wont get out
I have p92 same magzin change oring but leaking not solved
Good instructions as far as they go but you left out a huge step of troubleshooting and fixing the seal between the co2 cylinder and the mag where the piercing needle is.
Mines is still leaking! Wtf???
man you really just saved me omg
Wo kann ich dieses Tool bekommen mit dem ich das problem bei Co2 magazinen löse? In eurem Shop offenbar nicht. Wie nennt man das tool denn?
My mag leaks everywhere immediately after adding green gas and is coming out of all areas of the mag, is it too far gone or still fixable?
If it’s actually leaking from everywhere sorry to say you may just have to buy a new mag
@@Mrcrabs0 Damn alright, thanks