Lexus Sc300 Ar5 manual transmission install

Sdílet
Vložit
  • čas přidán 27. 08. 2024
  • Weeeeee Bacccckkkkk up and rolling🔥🔥🔥🔥…..we’ll semi back. Purchased a very low mileage Ar5 transmission from a Saturn Sky.
    (Clutchkit) www.driftmotio... .
    (Tail housing driveshaft adapter) autosportsengi....
    #2jz #ar5 #sc300 #ar5 #2jzgte #lexus #trd #lexussc300 #driftmotion #autosportsengineering #r154

Komentáře • 8

  • @clasycow
    @clasycow Před 10 měsíci +1

    This must've been actually hard to do but you make it look so easy. Impressive

    • @builtalliance2501
      @builtalliance2501  Před 10 měsíci +2

      I try my best to make it look easy so it doesn’t discourage people from doing things themselves 🫡

  • @srtwil9386
    @srtwil9386 Před 10 měsíci +1

    How did you put the pressure plate bolts on if you put it in the transmission first?

    • @builtalliance2501
      @builtalliance2501  Před 10 měsíci

      Bolt the pressure plate to the flywheel via the r154 bellhousing sight holes trq to 18lbs with loctite make sure there is no air gaps between the flywheel and pressure plate

  • @BjornFSE
    @BjornFSE Před 10 měsíci

    @5:23 i don't think you realized but you just blasted water right into your oil pan. the flywheel bolts go right through the crank....... you should have screwed the bolts back on first to prevent that....

    • @builtalliance2501
      @builtalliance2501  Před 10 měsíci

      Pretty sure the small amount of brake clean that my have made it into the hole of the crankshaft had dried well before it could damage anything

  • @ewilled8350
    @ewilled8350 Před 10 měsíci

    Where did you get your replacement input shaft? Its been discontinued by gm.

    • @builtalliance2501
      @builtalliance2501  Před 10 měsíci +1

      This is a different ar5 transmission not the same one I broke srry for the misunderstanding, I tried to find a input shaft for my old transmission but had no luck