What Is Orbital Action?
Vložit
- čas přidán 25. 08. 2021
- With a few notable exceptions, most manufacturers have taken their time adding orbital action to cordless reciprocating saws. Everyone wants their saws to cut quickly-so you might wonder if it’s really that big of a deal. The orbital action setting introduces an elliptical motion to the standard back and forth sawing on a reciprocating saw. This more aggressive action removes more material when cutting through wood. With a more aggressive cut, however, comes additional vibration. With the increased chatter, you should avoid using this mode when cutting metal or PVC with a Sawzall.
READ MORE: www.protoolreviews.com/what-i...
#PowerTools #Woodworking #Saws - Jak na to + styl
You explained the orbital action very clearly
Glad we could help!
I bought my dad a Porter Cable reciprocating saw with orbital action about 30 years ago and it blew away the Milwaukee Sawzalls I had used at that point! This was the first time I noticed a reciprocating saw with this feature. The tool has gotten some extreme use over the years and is still running strong today!
I had a rockwell tiger saw with orbital action back in the early 1980s. The two speed switch on low was what a Milwaukee sawzall would on high. The tiger saw on high could easily remove blade teeth and get red hot. It was unstoppable for me.
Great explanation and demo!
Cool testing 😎 👌
I have a question tool pros. Does the mode work when you use dewalts side blade holding mode?
Hi. Enjoyed your video. Maybe you can help this newcomer. I bought the Milwaukee 6538-21. I now know about the orbital action. There is a lever that says Shoe release lever. I unlocked it and figured the Shoe would be able to come forward and then backwards. It does not seem to release by pulling it out away from the Quik-Lok blade clamp that holds blade. How can I move shoe after I unlock it? Thank you Sir. Mike i.
Why don't all these saws have that straight-orbital switch? I bought a high end Dewalt DSC 380 and was blown away I couldn't make a straight cut, making the saw unsuitable for cutting metal as you stated.
Milwaukee Sawzall M18 CSX. No one knows what the error means when the diode lights up 4 or 6 times, and the machine only starts up for a short time?
멋진 테스트!
역시 밀워키 😍👍
Are there any disadvantages at all using orbital, besides not using orbital action to cut metal or PVC?