A Reciprocating Saw Can Do WHAT?! | Is This The Most EVOLVED POWER TOOL EVER MANUFACTURED?
Vložit
- čas přidán 5. 06. 2021
- In this video, "Baseboard Trim Installation In Kitchen | DIY Trim Tutorial" I will show you useful a reciprocating saw can be!
Reciprocating saws are extremely useful and versatile tools.
Designed by Milwaukee Tool Company in 1951, this tool revolutionized the tool industry.
As you will see in this video it has many uses and also many different types of attachments that make this tool a must have on any job.
I appreciate all the love and support from you guys.
You have helped me grow this channel and achieve more than ever thought I could have and for that I am grateful.
I aim to be a resource for you guys, so feel free to reach out with any questions. ➡ DetroitDIYChannel@Gmail.com
Thanks for watching and please don't forget to LIKE & SUBSCRIBE and leave all Comments, Questions, and Concerns down below in the COMMENTS Section!
Detroit D.I.Y Apparel has arrived please take a minute to check it out using the link below
detroit-diy.myspreadshop.com/all
**GIVEAWAY INFORMATION**
If you want to win the Saw Attachments follow the steps below.
1) Watch one of my videos
2) Email me (DetroitDIYChannel@Gmail.com) a comment on any of my videos. It can be about anything pertaining to my videos.
**SUBMISSIONS NOT ACCEPTED AFTER JUNE 27
**WINNER WILL BE SELECTED JULY 4!!!
DETROIT DIY 🏠🛠
#ReciprocatingSaw #ReciprocatingSawUses #DetroitDIY - Jak na to + styl
Best tool ever invented. I have two, one at home, one at the vacation home. Mainly for sawing timber and pruning and anything else. Variety of blades allows me to cut everything. Also have a twin saw and two chainsaws but my recip is the go to, and it feels safer as well. Thanks for a great posting.
ONCE I BOUGHT ONE, I NEVER FORGAVE MYSELF FOR NOT GETTING ONE FROM THE BEGINNING. I'M STILL AMAZED AT WHAT IT CAN DO. THE NAME FITS PERFECTLY !
I just bought a reciprocating saw and I was looking for more usages than just wood and metal cutting, those spider blades you showed are amazing. Thank you for your informative video.
Thanks I never knew of all the new attachments available 😊
I am now in love up to the hilt with the reciprocating saw 👍🏻👍🏻👍🏻
I have an older model Dewalt Reciprocating saw, It takes an allen ranch to replace the blade. Thank you for the information on the different blades, I've had my reciprocating saw for about three years now & had no idea there were that many different options for blades!
Thank you Sir. It was very educative.🎉
Excellent! Learnt a lot from you.
What was that black cord like thing hanging off the end?
Great video, I am now fully reciprocating saw pilled
Great video, but I cut aluminum with a circular saw sometimes if I need to cut a perfectly straight long cut in thick aluminum.
Hi, it's 2024 my first time watching your channel. I'm planning on updating my interior doors and need a saw. I was planning on buying a saw and after watching your video I won't have to, because I do have a reciprocating saw. So, thank you for your channel, I will be watching more.
Excellent video. Thanks for educating.
Hi from England thankyou for your explanation today I have just ordered one I am 62 just retired and want to make things for my garden and you helped thankyou
Great video! Thank you for sharing this. I saw Detroit and I got excited. Thank you D DIY! 😎
Yes you can buy a metal blade for a circular saw. I run an older U.S. made Milwaukee worm drive & a newer Skil mag 77. There are many manufacturers, but I primarily use Freud Diablo blades. I own a (7-1/4") 48 tooth carbide steel cutting blade (they also make a 60T for thinner materials), as well as a similar Aluminum cutting blade.
They're outstanding. They generate very little heat, cut very fast, straight & clean. In many/most applications, they are much faster, cleaner, and straighter than any offerings from an angle grinder, reciprocating saw, or a torch.
I also have Masonry blades which work extremely well.
These blades last quite awhile if used properly & cost around $25‐30.
Not trying to bash you, or the Sawzall...but if you're looking to cut metal quick & clean, the circular saw can most often blow the reciprocating saw out of the water, and is only bested by, the cost of the blade, depth of cut, and access to cut.
I wouldn't use my Mag 77 with a metal blade, not sure if the metal dust will ruin the saw if you keep on doing it. Same thing cutting concrete, I have a wet saw for this. I use my saw designed for cutting metals or my Milwaukee portable band saw.
@@kimchee94112
Valid points.
Working in the field there's only so much room on the truck which is why I designate an older worm drive for the occasional unforseen shit duty task.
Cutting any cement product dry & without even dust collection will absolutely destroy a skil saw in short order.
(Perhaps I should have prefaced my original post.)
In regards to a metal cutting/carbide blade on a traditional worm drive; I'm not so worried about dust as they throw chips rather than abrade.
There is a point to note that, the no load r.p.m. on metal saws are usually in the neighborhood of 25% or so less, leading me to believe they've modified their gearing for increased torque.
For occasional unforeseen use, this setup has served me well.
If cutting metal/masonry on a more frequent basis, I'd absolutely agree that a purpose built saw is irrefutably necessary.
Happy Thanksgiving pal.
Very helpful video !
Thnx a lot for your time !
Very informative!!!
Thanks for the tips!
Great tool
Must have one
I've learnt a lot from your videos. Please, can you give us tips on handling a reciprocating saw's kickback and maintenance of the machine? Thanks so much ...
Hello 👋. I've just watched your video for the very first time. I didn't know my reciprocating saw, accepted so many accessories 😅. My main reason to come on CZcams was to see if there was any way to stop the blade "wobbling" when in use. So that's how I came to watch your video. Cheers 👍 you have a great day 👍
YEP. ONE OF THE BIGGEST (ONLY?) PROBLEMS WITH THEM IS THE WOBBLING. MAKES IT HARD TO MAKE PRECISE CUTS WHEN YOU NEED TO.
Cool video.. Learned so much
Thanks! I never saw all these nice attachments.
Hi. Greetings from Venezuela....
Thanks for sharing your valuable knowledge and advice with the world...
I love all kind of tools... Unfortunately, They are very expensive here...
nice!
Great video.. I use mine to tear down sheds, cut metal, cut wood, furniture.. mainly demolition
I'm not going to email people but for what it's worth you are correct
Thanks for the info i am a new owner in Jamaica i have never seen the wire brish the scraper nor the grout cleaner before thanks
I cut through a solid 6" diameter pin made from 4140 in 4 hours with a single diablo blade, this saw, and a few solo cups of metalcutting coolant from the CNC. You can cut through anything and everything if you know to drag and roll the saw through the cut so you minimize your length of cut and use lubricant/coolant/water. I cut a small pinhole in the bottom of the coolant cup so it would drizzle into my cut while I'm sawing. A used 50 dollar sawzall with a 10 dollar blade will do a lot.
I can think of lots of saws that cut metal or wood or pretty much anything with the right blade
can we use it as hammer maybe :s. and i need a sawzall table to use my sawzall as jigsaw, but it is heavy to mount to the underside of the table. any idea ?
Learned something new about scrapers and grout removal (replacing broken tiles). The metal blade is huge though. People using interior-grade screws and nails for a deck is just dumb. At least I can saw through the metal and rust. :P
you can buy a metal cutting blade for you circ saw although you _should_ only use it on a saw that was designed for it, you don't have to.
Oscillating saws are more advanced, they can cut casts off arms while leaving the arm intact.
Hahahaha
I'm considering a recip saw as an alternative to a chainsaw to hard prune very high leylandii (one handed job). Thanks for this walk through. I'm buying a de walt one handed cordless. Shame I'm 18 months too late for your offer . A brush and scraper would be a much appreciated addition to my new recip saw😀😀😀
I purchased a cheap Ryobi 6" chainsaw on sale, surprisingly doing a good job at cutting trees even 6" diameter branches. If regular Ryobi price I would get the Milwaukee 6" chainsaw hatchet. A ripcipicating saw won't be anywhere the speed as a chainsaw even with the special wood pruning blade. The only advantage is cutting roots where you don't want the chain anywhere near dirt. For little branches under 3/4" I use a cordless pruner, either my DeWalt or Milwaukee. Both does a fine job, Milwaukee twice the price but has more features. For tinny branches my hand pruner goes much faster or the mini 8" Milwaukee hedge trimmer.
Get the m18 fuel hackzall. True one handed beast. With a 9in Diablo pruning blade with carbide teeth you'll be set.
Thanks for the information. Have you tried the pruning blades?
No, I have not. Am curious how well they work.
He mentioned pruning towards beginning of video. I use the pruning blade all the time. Only use chain saw on bigger branches.
I have for many years. Used to be $10 a pop, getting expensive since the blade wears out very fast but super sharp at first. I resharp those blades. The little Milwaukee M12 hackzall does a good job up in the trees with a large battery (say 4Ah), no need for my Super Sawzall. Chainsaw much faster and the chain last much longer. I like my cordless mini 6" chainsaw a lot, no need to bring out my cordless 18" most of the time.
👍🏾👍🏾👍🏾
Thought I was listening to Donald Sutherland for a minute there...
I always liked his movies.
Goddamn that wire brush attachment is fucking genius. But I’d rather just tape a wire brush to a sawzall blade than buy one so that’s exactly what I’m going to do
I don’t think you have considered the Angle Grinder!..It too can cut Metal, Wood, Sand, Polish and Grind…
I like sazsaws but I can do more with an angle grinder I can make an angle grinder more tools than that one
Hello from a fellow Michigander!
I am unsure who this video was made for? Recip saws are not a casual tool. Everyday home owners are not going to own one. But people that already own them, pretty much know what they are capable of. Not trying to be negative.
This video was made for the beginner D.I.Y er. Someone who has just purchased or wants to purchase a recipicating saw. Thanks for watching.
I'm a home owner and I have a cordless Makita saw. Use it all the time. There are lots of "home owner" versions available from Dewalt, Ryobi, etc. etc. - - Great Video - Thanks,
I'm a homeowner and purchased one because the drains in each bathroom sink rusted through one after the other. The threads were also rusted so I couldn't remove them from the sink by turning the pipes. For the first one I used a hacksaw to cut through to remove it. That took forever, so after that I bought a reciprocating saw and finished the next one in a fraction of the time. I haven't used it since then, but it was cheaper than a plumber , and less frustrating han a hacksaw. When the toilet tank bolts rusted through I decided that discretion was the better part of valor and used hacksaw blades.
Hi Sir l watched your video, in which you mention about the reciprocating saw , for me it was a very useful one as l wanted to buy one saw but very confused which to buy for multi task like how you mention in this video, very good for me as l got your knowledge of the important saw. Very sorry for l watched it today and l am from goa, india , today is 2nd july 2023. I have no idea of your email as you said that you will chose the winners on 4th july. Thank you so much for sharing your ideas and experience in the reciprocating saw video. God bless you Keeping posting your exp. which helps peoples like me bravo.
Thanks for watching, the giveaway was last year.
My Exwife has the Doc Johnson Attachment
You wouldn't need the gym lugging that fecking monster all day LOL
a vioeo audio book channel, no practical samples.... yiack
Am I too late to be entered 😔
Yes, way to late. Thanks for watching.
@@detroitdiy how about now? 😉
One of the least used tools I've owned. It's not good for accuracy, speed or cutting tree limbs. Cordless chainsaw way way faster. For tight spaces, oscillating saw is better.
There is also a sex toy attachment made for them, that seems frightening,
They didn't invent reciprocating saw the reciprocating saw is over 3000 years old they made the electric reciprocating saw there were gas powered reciprocating saws before this
Terrible audio
Had one for years just got some block/ brick blades will try them out soon 🧱
Your video was informative but not accurate. You can buy a metal cutting blade for your circular saw , table saw, electric miter saw. I use my miter saw for a variety of cuts in metal, when i want a sguare cut. Another thing about the circular saw they make a variety of blades for them. I did a lot of demo work. They make a blade exclusively for nail embedded wood . I like the reciprocating saw but to me i find the circular saw more versatile. As a builder you need a vast amount of power tools.
Yup
Can you turn your circular saw into a sex toy no but you can your reciprocating saw so he's right it's more versatile than your boring circular saw and it's lighter and easier to use
@@rhonda3526 😂😂😂