1995 Enfield Bullet front brake switch replacement

The front brake switch died. Luckily I was able to find a replacement online, and for a good price. Pretty straight forward getting the wires out and back in the headlamp shell. The trick was unscrewing the old switch. Not much room to work, I loosened the brake cable to let me move it aside a bit and used a small 3 inch needle nosed vise grip to get purchase on the switch barrel. When you install the new one you don't need to crank it into the threaded hole a great deal. You can check under the brake lever to see that it is depressed enough to open the circuit and stop screwing it in at that point. Nice easy job, with a bit of soldering.