JK Passenger Airbag Recall Prep - Removing JK Passenger Air Bag
Vložit
- čas přidán 18. 01. 2020
- I am finally getting OVERCLOCK3D in to get the passenger airbag recall done... but I have a few challenges that I want to remove from the equation first! Seicane, Tuffy, Rock Hard 4X4 Cage -- all interfere with the passenger airbag removal.
Please SUBSCRIBE on CZcams if you want to see more of my videos!
HERE IS THE RECALL INFO FOR THOSE CURIOUS:
static.nhtsa.gov/odi/rcl/2019...
2010-2016 Jeep Wrangler
Descriptive Information : Specific Takata front PAB inflators containing PSAN propellant installed as original
equipment in certain 2010-2016 MY Jeep Wrangler vehicles and not currently covered by prior inflator recalls may experience propellant degradation occurring
after prolonged exposure to HAH, high temperatures and high temperature cycling.
Vehicles included in this recall are those that were assembled with a PAB inflator included in Takata’s January 2, 2019 PAB inflator recall expansion of FCA US’ recall campaigns S43 and U03. Similar vehicles not included in this recall were not assembled with a PAB inflator included in Takata’s January 2, 2019 PAB inflator recall expansion and were not assembled with non-desiccated front PAB inflators containing PSAN propellant installed as original equipment.
787,620 Jeep Wrangler vehicles are affected.
Production Dates : APR 29, 2009 - SEP 17, 2016 - Auta a dopravní prostředky
Thank you so much! You saved me a ton of time. I have the same Rock Hard cage.
Thanks for the walkthrough. I have a very similar setup with aftermarket radio and RH cage, and I've been avoiding for the same reason. Maybe I'll go ahead and do the same now.
They stripped the airbag bolt on mine, had to keep the Jeep for two weeks - they did give me a loaner, and I was traveling... so, it worked out. Apparently the bolts are easy to strip/round over as I was told they’re aluminum.
you would be surprised how many people bring there cars in to our shop for recalls that are full of crap, good job
Welcome back bud
Thanks for this! I too have been putting this off for similar reasons. Now that I see what is involved, I can prep my Jeep too for the job. I don’t have a dash bar though.
Yeah they told me the same thing that I had to takeoff everything off my dash so they could do the work then they found out I was friends with the general manager and they did everything.lol
I had mine done last summer,lucky for me I just had to remove my vector dash bar
Do they need to hook up a programmer to my Jeep to do the airbag? My Jeep is a 2016 Rubicon with an unlocked ECM and I don't want them to touch the ECM at all.
I had to go through the same process of removing the same interior mods before taking the Jeep in for this recall. Had a similar experience when the dealer had to replace the front airbag sensor that is located behind the grill. This required removal of the winch, front grill and passenger side headlight.
how/where does it shoot out? I'm thinking of mounting a cup holder to the bar in front of the passenger above the glove box, will that get in the way?
Thanks!
Jeeps don’t need no stinkin’ airbags!
Hi Where are the module control airbags?
I have the same cage minus the secaine radio. I didnt have an issue taking mine in. The dealership didnt even have to remove my cage.
As a recall tech at Chrysler dealship, you sir did way too much work, that can come out in 2 minutes 😂
What did he not have to remove. Is there another video out there?
Holy hell sir I'm experiencing this tomorrow morning I've avoided it since 2015 in my 14 same color everything I went 3 times over the years and was told so many excuses and mine is untouched on inside except a phone holder on grab bar they never have parts tech is not here this month and then the best one was they said we can't do it because your lift and suspension are too high
I'm fed up but idiot calif now will not let you register for tags without it
What years are the recalls? I haven’t received any info on it. I have a 2017JKU.
2010-2016 Jeep Wrangler
Descriptive Information : Specific Takata front PAB inflators containing PSAN propellant installed as original
equipment in certain 2010-2016 MY Jeep Wrangler vehicles and not currently covered by prior inflator recalls may experience propellant degradation occurring
after prolonged exposure to HAH, high temperatures and high temperature cycling.
Vehicles included in this recall are those that were assembled with a PAB inflator included in Takata’s January 2, 2019 PAB inflator recall expansion of FCA US’ recall campaigns S43 and U03. Similar vehicles not included in this recall were not assembled with a PAB inflator included in Takata’s January 2, 2019 PAB inflator recall expansion and were not assembled with non-desiccated front PAB inflators containing PSAN propellant installed as original equipment.
787,620 Jeep Wrangler vehicles are affected.
Production Dates : APR 29, 2009 - SEP 17, 2016
Jeep keeps buggin me about mine as well but i havent take it in because i worry about them fucking it up.
Same here. I just don’t trust dealer mechanics especially for something like this where there is no money to be made. You know they will rush it and not put all the bolts back, etc. I have avoided taking mine in because I don’t want them pulling the dash and then I get squeaks and rattles because they didn’t care enough to put it back together correctly.
I have yet to take mine in for the recall, lol.
It's only been a year. :-)
When was the recall announced?
January 2019. static.nhtsa.gov/odi/rcl/2019/RCLRPT-19V018-6898.PDF
Took mine in and they didn't put the dash back together right. Haven't had a chance to go back in to get them to fix it yet.
That sucks. That's why I like to do everything myself.
This is the very reason I have not had mine done.
You said u never mess with airbags. No interest in a carbon fiber sporty steering wheel?
I sent you an email. Great channel!
Nice vid, CPO. I have a 2015 Rubicon that has the PCM swap from Superchips for the Trail Dash 2. I worry that the dealer might flash my unlocked PCM and render my TD2 useless. Did you have any problems with that?
Not yet. Here's hoping.
@@o3djeeps Good luck! Please update. :0)
@@o3djeeps Can we get an update? Thanks, CPO.
@@MajorPayne550E hmmm... looks like the dealership may have whacked CPO. i'm holding off on dismantling until nefarious activity has been ruled out.
Since you were in Major Disassemble Mode... You could have Folded the Windshield down just for Fun! 😝
Hahaha. Yeah, cuz I want the window to whistle from then on hahaha
Nah, the cage bolts to the top of the windshield too. It’s not just unbolting those either. Once the bolts are out, the cage gets out of wack and you have to loosen everything to reinstall.
Be careful and be safe from a passenger airbag