So So , first of all , nice work. But on -09, in the channels 63,64 ,65,and 66 the coding is different. I have a 2013 A4 B 8.5 and from my experience the correct coding is as follows: channel 63 is set to 4, 64 to 4 , 65 to 0, and 66 to 47 ! Now everything works , and the last mode stays in memory ! Thank you.
So drive select is the way the ECU behaves with your style of driving? I wonder if this would be a good upgrade for my car which has Stage II REVO tune.
Hallo, my car has already Drive select coded via OBD Dongel. It works. Now want to update to the Drive select Button. Is it sufficient to just pin the cable?
Hallo habe den Umbau beim Q5 8R durchgeführt und alles so codiert. Jetzt kommt die Fehlermeldung Adaptive Light Störung Und die Codierung der Kanäle 63 bis 66 was passiert wenn man diese nicht macht?
Gute Arbeit :) Habe auch einen A4 8k und habe Drive select reincodieren lassen, ohne den Schalter einzubauen. Wenn ich nun aber auf dynamic umschalte wird die Lenkung kein Stück direkter, wie ich es aus meinem A3 kenne. Habe ich irgendwas falsch gemacht oder gibt es verschiedene Servolenkungen im A4 und bei meinem ist das einfach nicht verfügbar?
@@thomaspflueger3590 Servus Irgendwie funktioniert es bei mir nicht. Habs laut Beschreibung von stemei gemacht, in zentralelektrik nur 2 Sachen ankreuzen, mehr ist in seiner Beschreibung nicht zu sehen. Würds gerne auch ohne Taste verwenden, also wie weit muss ich diesem Video hier folgen?
@XXX Xxx can you give me the link where you bought it Audi Drive Select retrofit i have an audi a4 b8.5 and i would like to install this also thank you
XXX Xxx Yeah maybe It's one of the easiest retrofits but I'm always afraid to break something. I've done some stuff to my ex ford focus but I realy don't want to "F" up with my audi. I was looking into drive select, auto high beam with comming/leaving home, and some other abilitations with the green hidden menu. At first I've wanted auto hill holder but since is a multitronic I don't need it actually. A rear camera would be nice also. But something that pisses me off is the missing heated mirrors. Deam on a car like that it's a shame. Shame on audi. That can't be an optional.
Hello I installed this device following the steps in this video and I had to go to Audi Service for activation because I do not have anyone with a car diagnosis to enter and change those parameters you describe in the video. The pièce(Drive select)cost me 27 € and I mounted it again for activation at Audi Service it costs me: about 400-500 €: 300 € costs Activation code of this piece + 1h30 work = 500 € :) This video does not specify this Activation Code, should it even be invented by Audi Service? Thank you !
Bei schalter was wird den unterschied wenn ich schalte zwischen dynamic und comfort modus zumbeispiel? Und in welche modus steht, wenn das knopf und codierung nicht installiert?
Hallo, wen ich die Schlüssel codieren volte er lässt mich nicht . Er sagt das ich eine cod eingeben muss, obwohl am anfang zeigt er nicht das ich diese 20113 eingeben muss. Hast du eine idee was soll ich machen? Geile video. Vielen dank
Thank you so much
So So , first of all , nice work.
But on -09, in the channels 63,64 ,65,and 66 the coding is different.
I have a 2013 A4 B 8.5 and from my experience the correct coding is as follows: channel 63 is set to 4, 64 to 4 , 65 to 0, and 66 to 47 !
Now everything works , and the last mode stays in memory !
Thank you.
So drive select is the way the ECU behaves with your style of driving?
I wonder if this would be a good upgrade for my car which has Stage II REVO tune.
Moin moin aus Bremen funktioniert das alles bei audi 8k5 Bj 2011?
Hallo, my car has already Drive select coded via OBD Dongel. It works. Now want to update to the Drive select Button. Is it sufficient to just pin the cable?
Hello. for facelift ads did not only need to change channel 66 where you write 47?
Hallo
habe den Umbau beim Q5 8R durchgeführt und alles so codiert.
Jetzt kommt die Fehlermeldung Adaptive Light Störung
Und die Codierung der Kanäle 63 bis 66 was passiert wenn man diese nicht macht?
Gute Arbeit :)
Habe auch einen A4 8k und habe Drive select reincodieren lassen, ohne den Schalter einzubauen.
Wenn ich nun aber auf dynamic umschalte wird die Lenkung kein Stück direkter, wie ich es aus meinem A3 kenne.
Habe ich irgendwas falsch gemacht oder gibt es verschiedene Servolenkungen im A4 und bei meinem ist das einfach nicht verfügbar?
Thomas Pflueger
Hallo
Beim FL Modell Lenkung elektronische ( nur Codierung)
Beim VFL hydraulische. ( man muss ein spezielle Lenkung habe)
Hab das Facelift Modell. Dann hab ich wohl nur was falsch gemacht danke dir.
Thomas Pflueger
Byte 8 Bit 1 von 0 auf 1 - für Lenkung (bei SERVOTRONIC)
Danke :)
@@thomaspflueger3590
Servus
Irgendwie funktioniert es bei mir nicht.
Habs laut Beschreibung von stemei gemacht, in zentralelektrik nur 2 Sachen ankreuzen, mehr ist in seiner Beschreibung nicht zu sehen.
Würds gerne auch ohne Taste verwenden, also wie weit muss ich diesem Video hier folgen?
@XXX Xxx can you give me the link where you bought it Audi Drive Select retrofit i have an audi a4 b8.5 and i would like to install this also thank you
Nice work. Deam I was hoping this is easier :(
it's easy. Next project Adaptive High Beam Assist and ACC
XXX Xxx Yeah maybe It's one of the easiest retrofits but I'm always afraid to break something. I've done some stuff to my ex ford focus but I realy don't want to "F" up with my audi. I was looking into drive select, auto high beam with comming/leaving home, and some other abilitations with the green hidden menu. At first I've wanted auto hill holder but since is a multitronic I don't need it actually. A rear camera would be nice also. But something that pisses me off is the missing heated mirrors. Deam on a car like that it's a shame. Shame on audi. That can't be an optional.
Is this the newer driveselect button? before there were 3 buttons in the a5 b8.
Xander it is for Audi A4/A5 FL and MMI 3G
Hello I installed this device following the steps in this video and I had to go to Audi Service for activation because I do not have anyone with a car diagnosis to enter and change those parameters you describe in the video. The pièce(Drive select)cost me 27 € and I mounted it again for activation at Audi Service it costs me: about 400-500 €:
300 € costs Activation code of this piece + 1h30 work = 500 € :) This video does not specify this Activation Code, should it even be invented by Audi Service?
Thank you !
Florin Sanduleac
www.stemei.de/pages/coding/audi-a4-8k/driveselect.php
Hi, funktioniert das nachrüst auch beim manuele Schaltgetriebe? Danke.
Gabriel Ratiu
Hallo. Ja es soll auch mit Schaltgetriebe funktionieren.
Bei schalter was wird den unterschied wenn ich schalte zwischen dynamic und comfort modus zumbeispiel?
Und in welche modus steht, wenn das knopf und codierung nicht installiert?
@@Vadmagyarpanda es wird gar nichts passieren
Hi , what pin did you use at the end of the cable
look at the video
Hallo, wen ich die Schlüssel codieren volte er lässt mich nicht . Er sagt das ich eine cod eingeben muss, obwohl am anfang zeigt er nicht das ich diese 20113 eingeben muss. Hast du eine idee was soll ich machen? Geile video. Vielen dank
Gabriel Ratiu
Hallo. Welche Programme benutzen Sie?
work with audi a5 2013 ?
Hi, was bringt driveselect beim. Handschalter?
tblade931 hallo. Eigentlich nicht viel. Andere Gefühl an Lenkrad und wen du ein Adaptive Federung hast dann geht es straffer oder komfortabel.
@@OlegusXl und wenn das nicht verbaut ist, gar nichts