For people who are having issues with charging where the phone doesn't charge, charges very slow, charges when you play with the cable or put the phone upside down etc.. Try pressing on the speaker that is located on charging port and also press the cover on the same area, if the phone charges then the issue is not the charging port but a connector on the flex cable that needs soldering...
So I had these issue at frist and i had to keep fiddling with the charger for it to charge, then all of a sudden it won't charge no matter what i did, i changed the charging port, but still won't charge, I'm guessing my issue is what you have said to be the flex cable, but I don't have anything to solder it with, so I'll have to take it to a shop, is there anyway to make sure it is actually the connecter not something else?
@@awnimar I got it fixed, they said it wasn't the flex cable but a piece that connects motherboard to the charging port, mine had stopped charging Completely as well you need to get it fixed :(
@@gamingforfun9000 ...Old school? You mean "disgusting amount of e-waste"? USB is the standard for a reason - you shouldn't be buying 500 different cables for each different device
@@jellifygirl What more wasrte, what modern charges arent the same, what are you talking about, i want charger that isnt usb and dont fall out or break and thats the old school shit. Well greeny first stop corporation and government from producing toxic waste, trhen i'll start. no matter how much we waste, this planet will clean it self from human disease eventually, not to mention stupidity.
Tell me why this being said they fall out...the last phone I've had the charger fall out of was a lightning-using apple device (cough cough if you're gonna use recycled and recyclable components go the extra mile and stop making extra fucking cords that do nothing special except for snap clean in half or start undressing from their insulation every now and again), and the last good phone I've had do that was the Sony Xperia T, a phone from...2012, was it? With a port twice as thick as the USB of the time, that has also been filled with mud and used by a dumbass child with ants in her brain (its not me its not me its not me i)
@@jellifygirl My c type on xperia xz premium doesnt always fall out, you got to force it in and wiggle it to even start trying, so do that for up to 20 min every time you have to charge, c type plug has nothing to hold in place in the phone, hell you could blow at it and it will fall out. Even slightest touch of the cord and got to reset the whole process again. People in general arent happy with c type, they might be faster for file transferring, my mate has same issue Usb chargers are just crap, it should be used for transfer of files only. You know what kind of charges i am talking about i assume? Also its not just the flat smooth charging head, its the c type plug itself, so on my end is more the port on the phone that the head of the cable, but the fact is the issue is stupid c type, i want to use it for file transfer not charging. Like my mate has same issues with 3 devices, on 2 of them its the cable (replaced it) on the other one its the plug on the device. I have never had charger issues since my first phone in 1998, till usb ones took over, why...because they were old school charge plugs, that dont fall out. And they charged multiple devices. mate we already polute way too much, already got thousand cables for instruments all kinds of crap. As for waste, its the world leaders and science he should invest into turning any waste into energy...but they all rather spend money on war economy, so at least dont bring up pollution into this, the other thing is, i said it can be an option, not to replace usb all together, you can use usb for everything so you can have one cord, i dont mind having two or hundred lol so it should be an option all im saying. So yeah, c type sucks for the most part
Good video, but it is only a 50% job on repairing this issue...to be 100%, it is good if you can also show us on the motherboard (there is this female connector from which the charging port C-type cable is connected to)...you can show us how to remove and perform solder of the female connector on the motherboard. This will "surely" resolve this charging issue....at least for this model (XZ premium, G8142 motherboard). Thanks! *Anyway, I still give u a thumb up
It can be done without removing the battery. By carefully removing the port cover so as not to snap it getting past the tab on the bottom of the battery
you gotta love how they make phones nowadays to make it a pain in the ass to open them, just to discourage fixing, and instead wanting you to buy entierly new phones instead.
@@genesis4665 it doesn't switch on. I had to get it repaired but the new port didn't work for too long. Maybe because it wasn't a sony, just a replacement
hello, I want to ask, my Sony XZP has a problem charging, I do not know the broken connector charger or not but if you press the back of the charger port, it can be charged so what do you think Thank you in advance
This was a very helpful video - used it to replace both the charging port and the battery but unfortunately it didn't solve my issue as the phone still won't charge
@@9mamy I was hoping that's what it was, sent it to a repair place as that sort of work is beyond me and had both connectors to the port and the battery replaced but that still didn't fix it. Sent it to another place that specialise more in laptop repairs and they said it needed a new IC power chip, but on replacing that it still wasn't working and they had no more ideas, so it seems my phone is pretty much bricked and all I did was plug in the charger! Hope it works out for you though, good luck!
hello my xz premium was almost unloading so i was uploading it vibrated several times and logged in i hung up everything idol after connecting loaded it does not load nor light light but when it connects to the computer it appears installing drivers but no loading signal can be the connect for sure?
It's 2021 now, this summer I basically need this. I ha dmy phone since release year. I wish I could just open it up, and hot swap it easily. I probably will be able to do such repair on a good day, but I think I need a new phone then I can get this one repaired by a local repair person that people trust. Sadly my connection got so loose I can't lay the phone on a table or on the floor for charging, an d have issue a connection to pc, slight movement in floor disconnects it, so I have to lay it in my bed to charge as it then won't be effected by me walking
Hi, My phone does not power on at all while the charger is connected to it. No led lights at all. Could this be the battery or the charger port? Cheers
It sounds like the battery, if it's actually charging that is. It could be either if your phone just isn't charging, try squeezing the area surrounding the port and see if that changes anything
@@jellifygirl My XZP started out with the back panel slowly but continuously expanding over about 4-6 months time. As if the battery was somehow growing and pushing the back panel off. I know the XZP has a bad habit of getting really hot at times, which is what makes me think that it got extremely hot too many times that it eventually melted the binding/glue that held it in place. Then it started having charging problems. It got to the point where I would have to plug the charging cable in at a specific position and then not bump it or move it at all, or else it would stop charging. The charging port is loose and the usb-c cables I plug into it always feel very wobbly instead of snug and secure. THEN, even when it would charge; it would charge SUPER slow. Then it stopped charging all together. Lasted about 4-6 days on one of the stamina modes with very dim display settings. Had the phone for 3 years from back in 2017. Got it 2 months after it came out and loved it so much that I recently bought the same phone. The thing is, I have some photos and vids saved on the internal memory that I forgot to transfer to my SD card. I still have my original defective XZP but I don't know if it just needs a new battery, a new charging port, or both. And I'm not veey confident about taking my phone apart and messing with the internals, but I don't want to take it to a repair person either. I'm in a pickle. Also my new XZP for some reason after a few days the power button has become completely unresponsive. The only way I can turn the screen on is by plugging in the charging cable, pressing the dedicated camera button, or by saying "ok google". Any suggestions? And the volume up/down + power holding trick doesn't work on it. It won't even respond to my fingerprint.
@@jellifygirl Also, the pinching around the charging port worked for me for like a week back when I was having severe charging issues. Then it just completely stopped charging.
yas it will, beacuse the pieces are stuck togheter due to a special glue that is also applied by robots. human hands arent that precize and even tho the pieces are in their place you cant garantee that there enough glue or that it is in a eevry little gap
@@sourbyolivierarodriguez1311 actually it's a pre-made adhesive film that is stuck in place using a special jig, not glue. But yes, it does create the water-tight barrier and without it the device will not be water or dust resistant. You can see it curling up in the video as he slides the card inside the phone. It's the black stuff coming out the side. It's quite easy to apply if you know what you're doing but typically only authorised service centres can order them from Sony. Don't do this on a device covered by warranty as you'll do more damage opening the device than you intend to repair. I see nobody uses ESD controls in these videos either. Amazing.
@@stevelee4915, Everytime I see a vid with no ESD protection it bothers me. Most of the time, people will have nothing happen. But I'm sure someone, somewhere fried something not knowing why it doesn't work then. And all because of ESD. If anyone doesn't know what ESD is. It's " Electric Static Discharge ". When you touch something metal and get that shock. That's what it is, but that's when you can feel it. You could do it and not even know. And when it hits electronics. You can compare it to, lighting hitting your wire coming into your house. Something is going to get fried bad.
My sony xperia c2305 has a charging issue when I charge the phone it doesn't work so I want Witrigs to do the needful all the repairs the back panel is broken and screen is also broken I hope the price is cheap or else we will receive card
At that point might as well just get a new one. If you want someone to fix all of these rather than trying to do it yourself,,,might be time to upgrade
@@somerandom5348 Sip, kasus gw dah 1,5 tahun lebih masih jarang yg kena yg jual juga masih dikit sekarang di Ali Express banyak yg jual, gw beli sampe kr belanda ongkirnya lebih mahal dari harga Partnya 😂😂
@@farchanazizan4068 gila jauh bener mesennya saya saja minta sodara saya yg kerja dikonter 3 minggu nunggu part 3 hari ngenyolder/rehot(gatau juga katanya kaya gitu)
Hello, i have a Problem. I changed the charging Port because my xz Premium was only charging if i pressed the Back and the Front of my Phone together exacty on that point, where the charging Port is. Now i changed the charging Port but the same Problem is still fu*king me Up..
This is bs I just bought a brand new unopened Xperia XZ Premium and that stupid cell phone doesn't want to charge hell that's the reason I had to buy a new phone my compact Z5 Xperia only wanted to charge when it want to... No more Sony cell phones for me sorry ya'll want put battery defects so bye bye buying me iphones or galaxies from now on
For people who are having issues with charging where the phone doesn't charge, charges very slow, charges when you play with the cable or put the phone upside down etc.. Try pressing on the speaker that is located on charging port and also press the cover on the same area, if the phone charges then the issue is not the charging port but a connector on the flex cable that needs soldering...
So I had these issue at frist and i had to keep fiddling with the charger for it to charge, then all of a sudden it won't charge no matter what i did, i changed the charging port, but still won't charge, I'm guessing my issue is what you have said to be the flex cable, but I don't have anything to solder it with, so I'll have to take it to a shop, is there anyway to make sure it is actually the connecter not something else?
@@awnimar I got it fixed, they said it wasn't the flex cable but a piece that connects motherboard to the charging port, mine had stopped charging Completely as well you need to get it fixed :(
@@arasa8896 did the have to format the phone?
@@awnimar nope
Thanks!
Get Original Replacement Parts For Sony Xperia XZ Premium: witrigs.com/d7vk2
My xz premium slow charging of one week... How to solve it
Awesome tutorial!!! I will be attempting this as soon as the parts come in. Fortunately the usb-c is not soldered on like past Xperia's!!!
All that for a charging port, thanks Sony!.
Every phoner should have an old school charge port option alongside usb
@@gamingforfun9000 ...Old school? You mean "disgusting amount of e-waste"? USB is the standard for a reason - you shouldn't be buying 500 different cables for each different device
@@jellifygirl What more wasrte, what modern charges arent the same, what are you talking about, i want charger that isnt usb and dont fall out or break and thats the old school shit. Well greeny first stop corporation and government from producing toxic waste, trhen i'll start. no matter how much we waste, this planet will clean it self from human disease eventually, not to mention stupidity.
Tell me why this being said they fall out...the last phone I've had the charger fall out of was a lightning-using apple device (cough cough if you're gonna use recycled and recyclable components go the extra mile and stop making extra fucking cords that do nothing special except for snap clean in half or start undressing from their insulation every now and again), and the last good phone I've had do that was the Sony Xperia T, a phone from...2012, was it? With a port twice as thick as the USB of the time, that has also been filled with mud and used by a dumbass child with ants in her brain (its not me its not me its not me i)
@@jellifygirl My c type on xperia xz premium doesnt always fall out, you got to force it in and wiggle it to even start trying, so do that for up to 20 min every time you have to charge, c type plug has nothing to hold in place in the phone, hell you could blow at it and it will fall out. Even slightest touch of the cord and got to reset the whole process again. People in general arent happy with c type, they might be faster for file transferring, my mate has same issue
Usb chargers are just crap, it should be used for transfer of files only. You know what kind of charges i am talking about i assume?
Also its not just the flat smooth charging head, its the c type plug itself, so on my end is more the port on the phone that the head of the cable, but the fact is the issue is stupid c type, i want to use it for file transfer not charging. Like my mate has same issues with 3 devices, on 2 of them its the cable (replaced it) on the other one its the plug on the device.
I have never had charger issues since my first phone in 1998, till usb ones took over, why...because they were old school charge plugs, that dont fall out. And they charged multiple devices. mate we already polute way too much, already got thousand cables for instruments all kinds of crap.
As for waste, its the world leaders and science he should invest into turning any waste into energy...but they all rather spend money on war economy, so at least dont bring up pollution into this, the other thing is, i said it can be an option, not to replace usb all together, you can use usb for everything so you can have one cord, i dont mind having two or hundred lol so it should be an option all im saying.
So yeah, c type sucks for the most part
I followed this video and was able to change the port of my phone. Many thanks!
Good video, but it is only a 50% job on repairing this issue...to be 100%, it is good if you can also show us on the motherboard (there is this female connector from which the charging port C-type cable is connected to)...you can show us how to remove and perform solder of the female connector on the motherboard. This will "surely" resolve this charging issue....at least for this model (XZ premium, G8142 motherboard). Thanks!
*Anyway, I still give u a thumb up
Do we really need to remove all part first? I just remove plastic at bottom of battery.
Pro tip: the back doesn't need any heat when the phone is already more than four years old
It can be done without removing the battery. By carefully removing the port cover so as not to snap it getting past the tab on the bottom of the battery
Are you sure?
I had problems removing the white male from the black female port at 3:12 and ended up breaking it right off... My phone works though I think
thanks a lot for this video, it's very interesting how I looks like inside,...
you gotta love how they make phones nowadays to make it a pain in the ass to open them, just to discourage fixing, and instead wanting you to buy entierly new phones instead.
It's still waterproof ??🤔
Hi, I've managed to snap off that whole thing off at 3:10 , can someone please tell me what that is or if I can fix it.. thanks
Same, I believe there might be different versions of that part and ours was not meant to be disassembled...
Does ur new charging port work with that snapped off ? Or did you end up figuring out what that is for exactly ive done the same thing
@@genesis4665 it doesn't switch on. I had to get it repaired but the new port didn't work for too long. Maybe because it wasn't a sony, just a replacement
hello, I want to ask, my Sony XZP has a problem charging, I do not know the broken connector charger or not but if you press the back of the charger port, it can be charged so what do you think Thank you in advance
Just replace the charging port entirely.
can u guide how to do the BtB connector i already change the charging port
Hey cuk masih aman kah tuh HP kalo juga rusak nih tak kasih link shoppe yg jual port USB c nya xzp
@@somerandom5348 sama ni gw agak diteken dlu bru bisa cas. Itu apa yg kena bro ?
@@omjunior4122 itu flexible port type c nya
This was a very helpful video - used it to replace both the charging port and the battery but unfortunately it didn't solve my issue as the phone still won't charge
it could be the plug on the motherboard that connects to the charging port. they said that to me and im waiting it for it to arrive to get it fixed
@@9mamy I was hoping that's what it was, sent it to a repair place as that sort of work is beyond me and had both connectors to the port and the battery replaced but that still didn't fix it.
Sent it to another place that specialise more in laptop repairs and they said it needed a new IC power chip, but on replacing that it still wasn't working and they had no more ideas, so it seems my phone is pretty much bricked and all I did was plug in the charger!
Hope it works out for you though, good luck!
Sir what is the use of Yellow plastic that.attached on the battery.. Sorry for my bad English
I have problem with the port charging in motherboard, hows that?
I just cleaned the port out with isopropyl alcohol and a fine brush, seemed to work
Is the back cover sticker neccessary? What is it for?
hello my xz premium was almost unloading so i was uploading it vibrated several times and logged in i hung up everything idol after connecting loaded it does not load nor light light but when it connects to the computer it appears installing drivers but no loading signal can be the connect for sure?
Thank you
That repetitive synth sound track feels like parasite worms are eating through my ears and into my brain.
Same but tune though
What is the name of back ground music?
I repaired mi e today and I didn't have to remove so much things
There's no need to remove the battery
There's not enough space to replace the charging port, so we remove the battery.
You're 100% right, absolutely no need. Enough space to replace the port.
@@massaki323 I've done this today, the port has to be slid out to be removed and the battery obstructs that.
I this today and no need to remove battery. Also other videos show not removing battery.
It's 2021 now, this summer I basically need this. I ha dmy phone since release year. I wish I could just open it up, and hot swap it easily. I probably will be able to do such repair on a good day, but I think I need a new phone then I can get this one repaired by a local repair person that people trust. Sadly my connection got so loose I can't lay the phone on a table or on the floor for charging, an d have issue a connection to pc, slight movement in floor disconnects it, so I have to lay it in my bed to charge as it then won't be effected by me walking
bro you online?
Can you please explain what's going on with the battery. What are those blue bits when you put it back in?
Glue. I never did add the glue back since there isn't room for the battery to move around anyway.
10:50 New feature - face recognition.
My problem is on the motherboard > port so the patch is fall out
Holy fk... that music aaaagggh
What glue is used to put the lid on?
Hi, My phone does not power on at all while the charger is connected to it. No led lights at all. Could this be the battery or the charger port? Cheers
It sounds like the battery, if it's actually charging that is. It could be either if your phone just isn't charging, try squeezing the area surrounding the port and see if that changes anything
Unless the screen's gone...but the little red light would still work
@@jellifygirl My XZP started out with the back panel slowly but continuously expanding over about 4-6 months time. As if the battery was somehow growing and pushing the back panel off. I know the XZP has a bad habit of getting really hot at times, which is what makes me think that it got extremely hot too many times that it eventually melted the binding/glue that held it in place. Then it started having charging problems. It got to the point where I would have to plug the charging cable in at a specific position and then not bump it or move it at all, or else it would stop charging. The charging port is loose and the usb-c cables I plug into it always feel very wobbly instead of snug and secure. THEN, even when it would charge; it would charge SUPER slow. Then it stopped charging all together. Lasted about 4-6 days on one of the stamina modes with very dim display settings. Had the phone for 3 years from back in 2017. Got it 2 months after it came out and loved it so much that I recently bought the same phone. The thing is, I have some photos and vids saved on the internal memory that I forgot to transfer to my SD card. I still have my original defective XZP but I don't know if it just needs a new battery, a new charging port, or both. And I'm not veey confident about taking my phone apart and messing with the internals, but I don't want to take it to a repair person either. I'm in a pickle. Also my new XZP for some reason after a few days the power button has become completely unresponsive. The only way I can turn the screen on is by plugging in the charging cable, pressing the dedicated camera button, or by saying "ok google". Any suggestions? And the volume up/down + power holding trick doesn't work on it. It won't even respond to my fingerprint.
@@jellifygirl Also, the pinching around the charging port worked for me for like a week back when I was having severe charging issues. Then it just completely stopped charging.
After replace the port the screen can’t be touch , what’s the problem
Probably damaged it at some point during the process
a hobbyist could fix it, like in the video,.. I pinky promise 🤘🏻
Would it lose the waterproof functionality?
yas it will, beacuse the pieces are stuck togheter due to a special glue that is also applied by robots. human hands arent that precize and even tho the pieces are in their place you cant garantee that there enough glue or that it is in a eevry little gap
@@sourbyolivierarodriguez1311 actually it's a pre-made adhesive film that is stuck in place using a special jig, not glue. But yes, it does create the water-tight barrier and without it the device will not be water or dust resistant. You can see it curling up in the video as he slides the card inside the phone. It's the black stuff coming out the side. It's quite easy to apply if you know what you're doing but typically only authorised service centres can order them from Sony. Don't do this on a device covered by warranty as you'll do more damage opening the device than you intend to repair. I see nobody uses ESD controls in these videos either. Amazing.
@@stevelee4915, Everytime I see a vid with no ESD protection it bothers me. Most of the time, people will have nothing happen. But I'm sure someone, somewhere fried something not knowing why it doesn't work then. And all because of ESD.
If anyone doesn't know what ESD is. It's " Electric Static Discharge ". When you touch something metal and get that shock. That's what it is, but that's when you can feel it. You could do it and not even know. And when it hits electronics. You can compare it to, lighting hitting your wire coming into your house. Something is going to get fried bad.
My Sony Xperia XZ AU SOV34 is doused with coffee, as a result, the battery can't be filled.
My sony xperia c2305 has a charging issue when I charge the phone it doesn't work so I want Witrigs to do the needful all the repairs the back panel is broken and screen is also broken I hope the price is cheap or else we will receive card
At that point might as well just get a new one. If you want someone to fix all of these rather than trying to do it yourself,,,might be time to upgrade
I still can't charge even after replace it please help
•I've fixed it from the loose
Please give me some solution
Ganti FPC Connector nya bang gw juga gitu, FPC di Motherboard nya itu yg rusak atau di re hot aja biasanya seh cuma lepas
@@farchanazizan4068 udh diganti Alhamdulillah berhasil makasih infonya
@@somerandom5348
Sip, kasus gw dah 1,5 tahun lebih masih jarang yg kena yg jual juga masih dikit sekarang di Ali Express banyak yg jual, gw beli sampe kr belanda ongkirnya lebih mahal dari harga Partnya 😂😂
@@farchanazizan4068 gila jauh bener mesennya saya saja minta sodara saya yg kerja dikonter 3 minggu nunggu part 3 hari ngenyolder/rehot(gatau juga katanya kaya gitu)
@@somerandom5348
3 minggu berarti beli di Ali Express udah banyak yg jual sekarang dulu mah sengsara wkwkwkwkwkwk
Do I need to use heat? I don't own a heat gun or hair dryer. Or is there another alternative like sticking in the microwave (joking) or something?
It's best off to send to a repair shop if you lack the tools and skills
Leave in the sun on a hot day? It's winter now where I live.
I literally slid my fingernail along the edge and it came off in seconds, no heat used.
Sony Xperia z1
ki chip chahiye
Everyone ⌚ NG while low batt
anyone in comments ? how to replace that bottom mic in the motherboard?
Try asking around on reddit or other forum type sites, youtube comments aren't really full of people who know much about anything lol
ni
وحش
THANKS NOW I LOST MY PHONE FOREVER,,,
Hello, i have a Problem.
I changed the charging Port because my xz Premium was only charging if i pressed the Back and the Front of my Phone together exacty on that point, where the charging Port is.
Now i changed the charging Port but the same Problem is still fu*king me Up..
I Hope you can Help me, because in two weeks i want to travel around the world..
Have you tried other charging cables?
Same problem,
@@YUNGxGUN
I think the problem is with the grounding in port charging, but I have tried connecting it with conductive tape, but it still can't
@Zayn how to avoid such problems in the future?
This is bs I just bought a brand new unopened Xperia XZ Premium and that stupid cell phone doesn't want to charge hell that's the reason I had to buy a new phone my compact Z5 Xperia only wanted to charge when it want to... No more Sony cell phones for me sorry ya'll want put battery defects so bye bye buying me iphones or galaxies from now on