You are THE definitive source I always go to for my Noble NB4 questions. I just installed V 102, the latest. It would be so awesome if you would do a vid and demonstrate the newest features. I've enjoyed all your others. Cheers from Alaska!
After reprogramming and calibrating everything seems to work ok. I can't understand what I did wrong the first time. Thank you very much and I can also confirm that the FW2.0.101 (FCC Version) version has no problem. at 250 meters I did not face any problem. Thank you very much! ! !
Wow fantastic update! Cant wait to add the GPS module to thy crawler and everything else added is brilliant too. This was a necessary release tbh because at more than double the price nobodys buying the pro relatively speaking compared to the NB4. Really glad they came through.
You would be surprised at how well the pro is selling even at £399 it's still way cheaper than a futabe or sanwa that can't do anywhere near as much :)
As usual...and, as everyone watching your channel has come to expect...excellent video, and excellent info. I would, however, like to make one suggestion related to naming files. When naming files using dates, is always best to go in a year-month-date format, 2-digits for each (4-digits for year is also good, but not necessary). This is because, not only is that the format that all PCs recognize...but, it also makes files the easiest to find. I even do this in naming folders (usually that format, followed by an actual name, such as "23-05-15 - NAB Show 2nd Day"). Just a 'suggestion'...but, a very smart one. Again, thanks for the info. So far, I'm off work tomorrow...so, I think I know what I'll be doing for at least part of the day. 🤙🏼
I have a fly wheel gap tool but what I noticed was when I took the filter off the carburetor gas was leaking out through it so it's a good chance it's the carburetor no good
After getting into racing, photography, and freestyle kwads and using nothing but openTX radios for the past few years i cant help but feel like any non opentx radio is severely lacking. if i could have the physical noble but with the power of openTX id be in heaven.
@@WTFRCCars yeah it's definitely not for everyone. I personally enjoy the setup process of a new rc profile but it was mind boggling at first. Spending an hour just to be able to arm your drone can be a bit much. Lol
First off, Thank you for all the info about Flysky that you provide! You are a great resource!! On to my question.. can you tell me which Hobby wing esc’s can utilize the new update for the NB4? Is it just the XERUN AXE R2? Or will any XERUN esc with ibus2 give you real time data of the esc via the TX?
Can you do a guide on how to setup the ibus2 connection to the hobbywing axe? There's this new feature of it for the 2.0.201 nb4. Edit: figured it out. Posted a quick guide on it.
Merci encore pour cette vidéo qui me fait gagner beaucoup de temps. Je suis juste déçu que lorsqu'une mise à jour est faite, l'interface utilisateur soit pas sauvegardé.
This update limited the throttle substantially on all my car models and I couldn’t fix it other than by going back to previous version, then I tried reinstalling the lates 101 version but got the same issue.
Trying to follow this and do a firmware update. I was with you all the way up to 9:30 where you say "Start the firmware updater." Then, you dragged some window over that apparently is the firmware updater. Where do i get the firmware updater? How do I start it?
Does this block 3rd party receievrs like the update on the pro (ie DasMikro)? If so, many users may want to hold of on this update. I'm also curious, is it possible to roll back to an earlier version if needed?
Hey bro quick question ok I have petrol 5th scale rc cars and I took one outside to run when I noticed it was disconnected from my nb4 so I reconnect it and now it will not start I went over every inch of the car I'm thinking it's something with the electrics and all so the engine cut off was on I took it off is there anything else I can check for on the nb4
You will likely have to slow the transmitter down so the esc can keep up, do this by setting the servo speed to 333hz and then calibrate the esc again :)
Hi Craig. I just completed the update but my endpoints are kinda wonky. Channel 1 and 2 are both not reaching 100 percent endpoints. Receiver is updated already. Have you seen this before?
Thank you very much for your value help and your effort to help, I have learned many things that we did not know before. I went through the new upgrade from FW2.0.100(FCC Version) to FW2.0.101(FCC Version) and what I noticed is that in two reciver FGr4v2, the brakes did not work anymore in inferno mp7.5 VE and mp9 VE, they have both vortex speed control. After resetting to FW2.0.100 (FCC) the brakes work normally. Do you know anything about this problem, thanks again for the valuable effort where do you do ! ! !
@@WTFRCCars Thank you very much, I have updated the firmware of the receiver and then calibrated the nb4, but the problem remains. In the FGr4S receiver the problem does not exist, only in FGr4v2 the problem remains. It seems like some bak version FW2.0.101 which in FW2 .0.100 does not exist!
Great video but I didn't get the ibus2 menu icon added after the update, did I miss something or it only comes up when the receiver is ibus2 capable? Any help greatly appreciated.
Hello, first, many thanks for your videos... i follow them from w3 years ago... Aand i need your support. I have just update my NB4 to hthe last firmware versión .102 , and i do have a problem... I have update 2 differnt receivers and bind them ágain and after calibrate both cars with Hobbywing ESCs, In the main screen of the NB4 the indication of the throttel do not reach the 100% ... the max. Indicates 65% I do not know why???
@amirnewson1905 if the receiver is binding up to the transmitter then it's working fine, I'd say either the radio is set to higher than 333hz or the kill switch has one of the wires broken or the relay may have failed
Hello Craig, Every time I try to bind my fgr4s to my nb4 I keep getting this message on the screen (It is detected that this receiver is an unauthorized device, there is a security risk, the system has been disabled!) Hopefully you will be able to help cure this, thanks 👍🏽
@@WTFRCCars kinda. Futaba and some others let you do it. For instance, my son and I each have NB4 controllers. If I turn my controller off he should be able to select the car on his controller without having to open up the car, fiddle with a bind plug etc.
@@WTFRCCars yea i did :) was just wondering if something went wrong hehe :) i also ordered the frm302, u think this will work with actual firmware? flysky also upgraded the frm302 ive seen
My firmware updater doesn’t show the controller. I followed step by step, plugged the controller into the computer and it makes the sound then I tell it to open the download and it’s just blank. The controller never pops up. Can you help with this ?
@@WTFRCCars it’s a Flysky Noble NB4+, I plug the controller into the computer and it makes the connected noise. On the controller I go to settings and click the software update button and the message pops up saying not to mess with it and the computer makes the noise again. Then I click to open the update and nothing.
@Average.at.13est the version of radio is on the about page and the updaters are listed on flysky site you have to goto the nb4+ and then at the bottom click the software link and download the same update as you radio or use assistant v3 to update it
@@WTFRCCars I was able to apply the update thru FlySky Assistant but I still can't seem to bind a master/Slave receiver.. It just keeps blinking and won't bind. Any help?
I just downloaded 2.0.102 and my throttle endpoints stop at 60% and will not go past 73% when adjusted all the way up. I can't download 2.0.101. When I clip it I'm brought to the release notes. Any suggestions would be hugely appreciated!
@@WTFRCCars alright one more question. I set this remote up for two cars and neither one of them are going full speed. My throttle trim is showing 100% on the radio but the cars are running at like 50% power. Any ideas?
When i went to download the software, my Bitdefender software detected that there was a virus that was downloaded 49ef542f-18a5-4e00-ae2d-c553034a6996.tmp. Anyone have this issue?
It's a false alert, but on a separate note windows has one of the most reliable antivirus software built in and it's free also your pc will perform much better with bitdefender removed :)
![[Tutorial] Mini-Z FHSS with Flysky Noble NB4 | Firmware Update, Installation & Setup](http://i.ytimg.com/vi/htRg0lEAIes/mqdefault.jpg)
Perfect, a detailed step by step how to guide! Being a newbie I have been waiting for this. THANK YOU.
Glad ya find it useful :)
You are THE definitive source I always go to for my Noble NB4 questions. I just installed V 102, the latest.
It would be so awesome if you would do a vid and demonstrate the newest features. I've enjoyed all your others. Cheers from Alaska!
Think I've covered them all in the last vids of the playlist :)
Always here to rescue us from any headaches! Thanks for it > And Cheers from the Mountains of New York 🍻💪🏼
Thanks means a lot that people find the vids helpful :)
After reprogramming and calibrating everything seems to work ok. I can't understand what I did wrong the first time. Thank you very much and I can also confirm that the FW2.0.101 (FCC Version) version has no problem. at 250 meters I did not face any problem. Thank you very much! ! !
Happy to help 🙂
Wow fantastic update! Cant wait to add the GPS module to thy crawler and everything else added is brilliant too.
This was a necessary release tbh because at more than double the price nobodys buying the pro relatively speaking compared to the NB4. Really glad they came through.
You would be surprised at how well the pro is selling even at £399 it's still way cheaper than a futabe or sanwa that can't do anywhere near as much :)
Thank you Sir. Now we have SVC Assignment on the nb4 🎉
Thank you for your time again Craig. I struggle to download and run assistant on my MacBook
From what I can tell the Mac version is not working at this time unfortunately
As usual...and, as everyone watching your channel has come to expect...excellent video, and excellent info. I would, however, like to make one suggestion related to naming files. When naming files using dates, is always best to go in a year-month-date format, 2-digits for each (4-digits for year is also good, but not necessary). This is because, not only is that the format that all PCs recognize...but, it also makes files the easiest to find. I even do this in naming folders (usually that format, followed by an actual name, such as "23-05-15 - NAB Show 2nd Day"). Just a 'suggestion'...but, a very smart one. Again, thanks for the info. So far, I'm off work tomorrow...so, I think I know what I'll be doing for at least part of the day. 🤙🏼
Glad ya like it, as for the naming I just have mine set to show by date created so the newest is always where it should be :)
Great walkthrough and thanks again for the help!
Glad ya like it mate :)
Well thank you non the less for your assistance and great videos much appreciated
Did you see my vid on how to register? Also have you tried using a mobile hotspot just to do the registration?
Great video, just did #2 NB4s without any issues.
Thanks 👍
I have a fly wheel gap tool but what I noticed was when I took the filter off the carburetor gas was leaking out through it so it's a good chance it's the carburetor no good
Thanks for all your help bro I took the kill switch off of the engine and still will not turn over it can't be nothing else but the engine
The cdi unit that tells it to spark check the gap from the flywheel
After getting into racing, photography, and freestyle kwads and using nothing but openTX radios for the past few years i cant help but feel like any non opentx radio is severely lacking. if i could have the physical noble but with the power of openTX id be in heaven.
Yep agree but unfortunately most people wouldn't be able to use open tx as lots struggle just using the stock firmware but would be a nice option
@@WTFRCCars yeah it's definitely not for everyone. I personally enjoy the setup process of a new rc profile but it was mind boggling at first. Spending an hour just to be able to arm your drone can be a bit much. Lol
First off, Thank you for all the info about Flysky that you provide! You are a great resource!!
On to my question..
can you tell me which Hobby wing esc’s can utilize the new update for the NB4? Is it just the XERUN AXE R2? Or will any XERUN esc with ibus2 give you real time data of the esc via the TX?
Only the axe r2 as yet
@@WTFRCCars appreciate the quick reply. 🤙
No probs
great explanation .. love it
Flysky assistant won’t connect to server. After 15 minutes. Any suggestions? Thanks Mike in Michigan
It's just really really slow unfortunately
There's a 6/13/23 update (FW2.0.102) have you updated yet and if so what's new in that update?
It was just to fix an issue with the fgr4s v1 receivers
Thank you🏁👍🏾🏁👍🏾💯
Happy to help 😁
Une nouvelle mise à jour est arrivée 2.0.102. J'espère voir une nouvelle vidéo 😊
There's nothing new in the 2.0.102 only a fix for the fgr4s v1 receiver being detected as none genuine :)
Can you do a guide on how to setup the ibus2 connection to the hobbywing axe? There's this new feature of it for the 2.0.201 nb4.
Edit: figured it out. Posted a quick guide on it.
If I get an axe r2 I'll do a vid :)
No my computer is in the shop getting repaired but it was working fine then the other day I took it for a run and it was disconnected from the nb4
Definitely not something I've had and I have 1 nb4 2 nb4 pro's and an nb4+ with over 30 rc's but make sure your servo frequency is set to 333hz :)
Looks like they have removed the DL link from US... wonder if there is issues?
No issues it's just the firmware has a new kyosho RC in that hasn't be released lol
Brazil is removed to...
Can't download in Germany either
It should all be working fine now flysky have corrected the issue :)
@@WTFRCCars yes... And still tr1 and tr2 can't be setup as momentary 3 pos switches 😞
Thank you for this. So the nb4 has the step settings in the speed channel like the pro.
I'll have to spend time with it cos I ain't had a look yet
Yes it does now. For some reason the last FW update made the ch speed adjustments in 1/10th steps, but this new one is now 1/100th steps like the pro.
Merci encore pour cette vidéo qui me fait gagner beaucoup de temps. Je suis juste déçu que lorsqu'une mise à jour est faite, l'interface utilisateur soit pas sauvegardé.
It's because it re writes the whole memory, if you back up with assistant v3 then restore it should put them back for you.
@@WTFRCCars Ok merci, je vais essayer.
Yeah it’s frustrating I have even tried a yahoo and created new accounts
It's difficult for me to say why it's not working without being at the pc but yeh they need to sort assistant out definitely
This update limited the throttle substantially on all my car models and I couldn’t fix it other than by going back to previous version, then I tried reinstalling the lates 101 version but got the same issue.
Just run calibration in the main menu and it will work fine on latest firmware
Trying to follow this and do a firmware update. I was with you all the way up to 9:30 where you say "Start the firmware updater." Then, you dragged some window over that apparently is the firmware updater. Where do i get the firmware updater? How do I start it?
Down load it from the link in the description it's called firmware updater from flyskys site and to start it you just click on it :)
@WTFRCCars the only thing I saw on the site that had the word "updater" in it was a "receiver updater." Is that the one I want?
@VagrantRC nope, there is assistant v3 at the bottom and up at the top of the list is actual firmware update files :)
I have a question... How can I program the Ch3 "Lights" to remain off, after turning off the receiver?
Not sure what your asking as any lights on ch3 would lose power when the receiver is off ?
Does this block 3rd party receievrs like the update on the pro (ie DasMikro)?
If so, many users may want to hold of on this update.
I'm also curious, is it possible to roll back to an earlier version if needed?
Yes you can roll back and the pro will still work with Dasmikro just in one way transmission :)
Why after updating is my throttle rate only go to 63 forward and -11 reverse? EPA is 100 both ways, does it on every model
Calibration in the main menu will correct it
Hey bro quick question ok I have petrol 5th scale rc cars and I took one outside to run when I noticed it was disconnected from my nb4 so I reconnect it and now it will not start I went over every inch of the car I'm thinking it's something with the electrics and all so the engine cut off was on I took it off is there anything else I can check for on the nb4
Was it working and you updated the transmitter?
Ok I will do that when I get off work is there any setting for the engine shut off thar I should have on although it's off
Not really just make sure the servo frequency is set to 333hz as most of the kill switches can't cope with more
Hi. Can you help me. I have a NB4 but i cant calibrate my esc’s to have a brake. All skyrc esc. Ts50 Ts120 and Ts160
You will likely have to slow the transmitter down so the esc can keep up, do this by setting the servo speed to 333hz and then calibrate the esc again :)
👍👍
Glad ya like it :)
I installed the Flysky Assistant but it doesn't open, only appears the message "connecting to the server", what can I do?
Just leave it running it takes a long time to connect
Is it possible to use the Hobbywing ESC i-bus support on the fgr4s receivers? Thanks 👍
Hi no it will only work on enhanced receivers so inr4-gyb, fgr4b, fgr8b, fgr12b, frt8b, and ftr12b :)
Hi Craig. I just completed the update but my endpoints are kinda wonky. Channel 1 and 2 are both not reaching 100 percent endpoints. Receiver is updated already. Have you seen this before?
Run calibration in main menu :)
@@WTFRCCars Thanks! I actually gave that a try after messaging you and it worked perfectly! I appreciate you!
Spot on :)
what's the difference between standard and FCC?
I explain in the latest firmware vid czcams.com/video/cJ8Pm5Fh91c/video.html
Or could it be the receiver which is fgr4 receiver
Thank you very much for your value help and your effort to help, I have learned many things that we did not know before. I went through the new upgrade from FW2.0.100(FCC Version) to FW2.0.101(FCC Version) and what I noticed is that in two reciver FGr4v2, the brakes did not work anymore in inferno mp7.5 VE and mp9 VE, they have both vortex speed control. After resetting to FW2.0.100 (FCC) the brakes work normally. Do you know anything about this problem, thanks again for the valuable effort where do you do ! ! !
If you have issues update the receiver firmware and then calibrate the nb4 all should then work fine
@@WTFRCCars Thank you very much, I have updated the firmware of the receiver and then calibrated the nb4, but the problem remains. In the FGr4S receiver the problem does not exist, only in FGr4v2 the problem remains. It seems like some bak version FW2.0.101 which in FW2 .0.100 does not exist!
Also check the servo frequency is set to 333hz then calibrate the esc to match the transmitter should all work fine then
@@WTFRCCars The servo frequency is set to 400 Hz should I leave it at that ? Or Should change it to 333 Hz?
Depends on what your servo needs most are 333hz :)
Great video but I didn't get the ibus2 menu icon added after the update, did I miss something or it only comes up when the receiver is ibus2 capable? Any help greatly appreciated.
Do you have an enhanced receiver bound as classic receivers can't do ibus 2
I only have fgr4 and fgr4s and not sure if they are ibus2 capable
@viki7110 no they can't do ibus2
Thanks will get one capable and hope it will appear.
Hey if I never updated my nb4 and there is nothing in memory because I just got it I just have to do the update correct yes
Yep just update it to the latest version :)
Thanks your the best great information
No worries 😁
@wtf rc cars hello how do I delete not wanted models from the list?
Just reset that model memory slot :)
Hello sir,
What's the difference between FCC and STD ?
Fcc higher transmitter power slightly longer range but shorter battery life, standard is stock transmitter power but longer battery life :)
@@WTFRCCars Thank you, appreciated :)
Guy I updated my hand set yesterday with 2.0.102 with svc 🤔
The 1.0.2 update was just a little update to fix an issue with fgr4s v1 receiver
If the kill switch is bad will the stop the engine from starting I'm literally trying everything
Yeh if kill switch fails then the engine will not run
@@WTFRCCars is there anyway I can test the kill switch to see if that's what stopping the motor from starting before I buy a new one?
Hello, first, many thanks for your videos... i follow them from w3 years ago...
Aand i need your support.
I have just update my NB4 to hthe last firmware versión .102 , and i do have a problem...
I have update 2 differnt receivers and bind them ágain and after calibrate both cars with Hobbywing ESCs,
In the main screen of the NB4 the indication of the throttel do not reach the 100% ... the max. Indicates 65%
I do not know why???
Run calibration in the system menu of the nb4 and it will work correctly again :)
Thanks., everything is OK, now
Do you know if there is any differences between firmwáre versión .101 and .102 ???
@Luis-Volt 102 was just a tiny update to fix an issue with the fgr4s v1 not being detected correctly but not many people have fgr4s v1 receivers
Craig i need to update all the receivers, after the nb4 update?
It's always best too
O I have a killa bee on there as well I'm wondering if that may be the problem but it's beeps on tell I switch it off
Think that kill switch is one that needs a 333hz servo frequency from the transmitter
@@WTFRCCars ok so I just switch my nb4 333hz is that correct?
@amirnewson1905 yep yep
@@WTFRCCars so it could be a bad receiver or kill switch which one do you think?
@amirnewson1905 if the receiver is binding up to the transmitter then it's working fine, I'd say either the radio is set to higher than 333hz or the kill switch has one of the wires broken or the relay may have failed
Mine has problems turning on have to hit the reset button and it might turn on, today it wont even turn on hmm wonder if this update will help
Sounds like a broken power button
@@WTFRCCars turned out to be the 1650 battery and your video helped me thanks man.
@gozzyboy1989 nice one :)
Hello Craig,
Every time I try to bind my fgr4s to my nb4 I keep getting this message on the screen (It is detected that this receiver
is an unauthorized device,
there is a security risk,
the system has been disabled!)
Hopefully you will be able to help cure this, thanks 👍🏽
It's been fixed in the latest firmware you need to update the transmitter
@@WTFRCCars I'm running the firmware that has the updated settings for the gyro settings, is there a newer firmware?
@lawrenceashby4719 yeh from last week
@@WTFRCCars thanks for the help, much appreciated 👍🏽
Hello, is there a list of the Hobbywing ESCs that can work with this firmware? Thanks
At the moment only the axe r2 system is updated to work over ibus 2 programming
@@WTFRCCars Thanks for the quick reply! Hopefully HW will extend support to more ESCs
@albertkelly7129 yep definitely more about on the way just not sure when
@@WTFRCCars Great news, thx again
Any idea if the NB4 / receivers will be able to bind to multiple controllers?
Not at the same time that's the whole point of binding so no other tx can control them
@@WTFRCCars kinda. Futaba and some others let you do it.
For instance, my son and I each have NB4 controllers. If I turn my controller off he should be able to select the car on his controller without having to open up the car, fiddle with a bind plug etc.
Nope and none of the other high end radio's work like that, the chap dumbo rc might though
I can’t get mine to pair with to my hp pc threw usb
This normally comes down to people not using a data cable and just a power usb cable so worth trying a proper usb data cable
Hmmm download link is dead on flysky web :(
I've made them aware of it
After the update my throttle and steering endpoints have to recalibrate...u had that too? If i go to the old version its fine lol
Just run the calibration in the menu and it will work fine
@@WTFRCCars yea i did :) was just wondering if something went wrong hehe :) i also ordered the frm302, u think this will work with actual firmware? flysky also upgraded the frm302 ive seen
The frm303 is out in a few days but yeh the frm302 works with the nb4
@@WTFRCCars you're nb4 man 😎
My firmware updater doesn’t show the controller. I followed step by step, plugged the controller into the computer and it makes the sound then I tell it to open the download and it’s just blank. The controller never pops up. Can you help with this ?
Make sure the controller is in update mode, which radio are you updating?
@@WTFRCCars it’s a Flysky Noble NB4+, I plug the controller into the computer and it makes the connected noise. On the controller I go to settings and click the software update button and the message pops up saying not to mess with it and the computer makes the noise again. Then I click to open the update and nothing.
@Average.at.13est you have to download the version that matches you nb4+ so EU or EN or it won't see the nb4+
@@WTFRCCars I have the EN version, how would I find out if that’s the correct version ?
@Average.at.13est the version of radio is on the about page and the updaters are listed on flysky site you have to goto the nb4+ and then at the bottom click the software link and download the same update as you radio or use assistant v3 to update it
When I update the receiver is it better to Update then Bind or Bind then Update or doesn't it matter?
A receiver doesn't need to be bound to update it :) so I'd update it then bind.
@@WTFRCCars thanks for reply. I updated rx then binded as you said and everything's working!
Spot on :)
My PC won't let me download the firmware update. Chrome and Microsoft edge both say "Virus detected".. What am I doing wrong?
It's a false alarm you just have to allow it
@@WTFRCCars I was able to apply the update thru FlySky Assistant but I still can't seem to bind a master/Slave receiver.. It just keeps blinking and won't bind. Any help?
Both need to be enhanced receivers and need to be updated :)
@@WTFRCCars They’re the Fgr4s v2 receivers. Are those not compatible?
Not with dual receiver you need the enhanced ones fgr4b fgr8b fgr12b or inr4 gyb
Can I still export my models with 2.0.85?? Assistant doesn’t seem to want to find my radio properly
No 85 is not compatible with assistant v3 unfortunately
@@WTFRCCars so what do I do?? Can I still update my transmitter and lose all of my saved cars??
Yes you can update but just have to re set up all your cars unfortunately this is why I advise people to keep upto date with the firmware version
@@WTFRCCars ok thanks for that. Your doing a great job. Flysky should be paying you
They give me all the radios and receivers so I can make vids for them :)
I just downloaded 2.0.102 and my throttle endpoints stop at 60% and will not go past 73% when adjusted all the way up.
I can't download 2.0.101. When I clip it I'm brought to the release notes.
Any suggestions would be hugely appreciated!
Yeh just run the calibration in the system menu and move your throttle and steering over the whole movement it will set it back up for you :)
@@WTFRCCars dude I hope they are hooking you up for this. Thanks brother! You saved me bum.
@@WTFRCCars so I'm good with 2.0.102?
Yeh it's just has a few fixes for the original fgr4s v1 that was incorrectly detected as none genuine :)
@@WTFRCCars alright one more question. I set this remote up for two cars and neither one of them are going full speed. My throttle trim is showing 100% on the radio but the cars are running at like 50% power. Any ideas?
Is there a way to use the assistant without registering I keep getting an error and want to keep a back up of my memories
Nope but what's the error you get
@@WTFRCCarsit says I’ve input wrong email, I never get the email with the registration code.
@vulneratusnonvictus5963 so you enter your email and press get SMS, then you receive the SMS code by email and enter the code to register
Correct it says my email is invalid or in the wrong format
Who is your email with ?
Whats the Difference for FCc or other version?!
FCC longer range less battery life
@@WTFRCCars is there a way to see if I have the FCC currently?
Yeh main menu all the way to the bottom then about, it will show you what version you have :)
When i went to download the software, my Bitdefender software detected that there was a virus that was downloaded 49ef542f-18a5-4e00-ae2d-c553034a6996.tmp. Anyone have this issue?
It's a false alert, but on a separate note windows has one of the most reliable antivirus software built in and it's free also your pc will perform much better with bitdefender removed :)